Searched for: author%3A%22Avallone%2C+F.%22
(1 - 20 of 77)

Pages

document
Goyal, J. (author), Avallone, F. (author), Sinnige, T. (author)
Using propellers in negative thrust conditions can potentially result in many benefits, such as a steeper descent, a reduced landing run, reduced community noise, energy regeneration, etc. However, the aerodynamics and aeroacoustics of propellers in this regime are not well understood. This paper presents an aeroacoustic analysis of an isolated...
journal article 2024
document
Zamponi, R. (author), Avallone, F. (author), Ragni, D. (author), Schram, C. (author), van der Zwaag, S. (author)
This paper elucidates the link between the near-wake development of a circular cylinder coated with a porous material in a low Mach-number flow and the related aerodynamic sound attenuation. It accomplishes this by formulating the cylinder flow-induced noise as a diffraction problem. The necessity for such an approach is driven by...
journal article 2024
document
Zhang, Y. (author), Avallone, F. (author), Watson, S.J. (author)
In this paper, the feasibility of using far-field acoustic measurements as a non-contact monitoring technique for wind turbine blade leading edge erosion is assessed. For this purpose, a DU96 W180 airfoil with several eroded leading edge configurations of different severities is experimentally investigated. The eroded leading edges are designed...
journal article 2023
document
Luesutthiviboon, S. (author), Meirelles Pereira, L. (author), Ragni, D. (author), Avallone, F. (author), Snellen, M. (author)
The authors would like to provide the following corrections and clarifications to the article titled “Aeroacoustic Benchmarking of Trailing-edge Noise from a NACA 633–018 Airfoil with Trailing-edge Serrations” which has been published in the AIAA Journal Vol. 61, No. 1, and can be accessed online via https://doi.org/10.2514/1.J061630. The first...
journal article 2023
document
Luesutthiviboon, S. (author), Lima Pereira, L.T. (author), Ragni, D. (author), Avallone, F. (author), Snellen, M. (author)
Experimental results on trailing-edge (TE) noise from a NACA 63<sub>3</sub> –018 airfoil are presented for a chord-based Reynolds number Re<sub>c</sub> range between 2 × 10<sup>5</sup> and 3 × 10<sup>6</sup>. Far-field TE noise from the baseline airfoil with a straight TE and TE serrations is measured with varying Re<sub>c</sub>, angle of...
journal article 2023
document
Yunus, F. (author), Casalino, D. (author), Avallone, F. (author), Ragni, D. (author)
This paper presents a noise propagation approach based on the Gaussian beam tracing (GBT) method that accounts for multiple reflections over three-dimensional terrain topology and atmospheric refraction due to horizontal and vertical variability in wind velocity. A semi-empirical formulation is derived to reduce truncation error in the beam...
journal article 2023
document
Zamponi, R. (author), Ragni, D. (author), van der Zwaag, S. (author), Avallone, F. (author)
The aerodynamic noise radiated by the flow past a cylinder in the subcritical regime can be modeled by a quadrupolar sound source placed at the onset position of the vortex-shedding instability that is scattered by the surface with a dipolar directivity. When the cylinder is coated with a porous material, the intensity of the shed vortices is...
journal article 2023
document
Boatto, Umberto (author), Bonnet, Paul A. (author), Avallone, F. (author), Ragni, D. (author)
Blade Element Momentum Theory (BEMT) -based approaches provide 15%–20% inaccurate load predictions under uniform steady inflow. Inaccuracies were related to unclear aerodynamic mechanisms causing the Prandtl Tip-Root Loss (TRL) correction to fail at high Tip-Speed Ratio (TSR) and the ambiguous drag coefficient treatment under Stall Delay (SD)...
journal article 2023
document
Lima Pereira, L.T. (author), Avallone, F. (author), Ragni, D. (author), Scarano, F. (author)
This work discusses the physics of noise reduction achieved from serrated trailing–edges and its impact by the serration design. An experimental campaign is carried out with a benchmark 2D model based on a NACA 63<sub>3</sub>–018 airfoil. Different trailing-edge serrations are tested under several flow speeds and angles of attack conditions...
journal article 2023
document
Yunus, F. (author), Casalino, D. (author), Avallone, F. (author), Ragni, D. (author)
Efficient calculation of urban air mobility noise footprint in a vertiport environment, considering acoustic effects of various designs, operational conditions, and environmental factors, is essential to limit the noise impact on the community at an early stage. To this purpose, the computationally efficient low-fidelity approach presented by...
journal article 2023
document
Arcondoulis, E.J.G. (author), Liu, Y. (author), Ragni, D. (author), Avallone, F. (author), Rubio Carpio, A. (author), Sedaghatizadeh, N. (author), Yang, Y. (author), Li, Z. (author)
Vortex shedding in the wake of a cylinder in uniform flow can be suppressed via the application of a porous coating; however, the suppression mechanism is not fully understood. The internal flow field of a porous coated cylinder (PCC) can provide a deeper understanding of how the flow within the porous medium affects the wake development. A...
journal article 2023
document
Zhang, Y. (author), Avallone, F. (author), Watson, S.J. (author)
In recent years, with the development of the wind power industry and the increase in the number of wind turbines, the condition monitoring of blades and the detection of damage are increasingly important. In this work, a new non-contact damage-detection approach is experimentally investigated based on the measurement of airfoil aerodynamic noise...
journal article 2022
document
Romani, G. (author), Grande, E. (author), Avallone, F. (author), Ragni, D. (author), Casalino, D. (author)
This paper presents a computational study of flow incidence effects on the aeroacoustics of a propeller operating at low blade-tip Mach numbers. The numerical flow solution is obtained by using the Lattice-Boltzmann/Very Large Eddy Simulation method, while far-field noise is computed through the Ffowcs-Williams &amp; Hawkings' acoustic...
journal article 2022
document
Grande, E. (author), Romani, G. (author), Ragni, D. (author), Avallone, F. (author), Casalino, D. (author)
This paper presents an experimental investigation of a propeller operating at low Reynolds numbers and provides insights into the role of aerodynamic flow features on both propeller performances and noise generation. A propeller operating at a tip Reynolds number regime of 4.3 × 10<sup>4</sup> − 4.38 × 10<sup>4</sup> is tested in an anechoic...
journal article 2022
document
Teruna, C. (author), Rego, Leandro (author), Casalino, D. (author), Ragni, D. (author), Avallone, F. (author)
This manuscript presents the application of a recently developed noise reduction technology, constituted by poro-serrated stator blades on a full-scale aircraft model, in order to reduce rotor-stator interaction noise in the fan stage. This study was carried out using the commercial lattice Boltzmann solver 3DS-SIMULIA PowerFLOW. The simulation...
journal article 2022
document
Zhang, Y. (author), Avallone, F. (author), Watson, S.J. (author)
In this work, aimed at the development of an aeroacoustics-based wind turbine blade damage detection approach, the noise scattered from two airfoils with damage at the trailing edge or at the leading edge is investigated. Four trailing edge cracks (with width of 0.2, 0.5, 1.0 and 2.0 mm) and four leading edge erosion configurations (consisting...
journal article 2022
document
Grande, E. (author), Ragni, D. (author), Avallone, F. (author), Casalino, D. (author)
This paper explains the presence and relevance of noise caused by a laminar separation bubble (LSB) on a propeller operating at a low Reynolds number. Microphone measurements of a propeller with both clean and forced boundary-layer transition blades are carried out in an anechoic wind tunnel by varying the propeller advance ratio J from 0 to 0.6...
journal article 2022
document
Brandetti, L. (author), Avallone, F. (author), De Tavernier, D. (author), LeBlanc, B.P. (author), Ferreira, Carlos (author), Casalino, D. (author)
Vertical-axis wind turbines have the potential to be installed nearby urban areas, where noise regulations are a constraint. Accurate modelling of the far-field noise with low-order fidelity methods is essential to account for noise early in the design phase. The challenge for the vertical-axis wind turbine is the unsteady azimuthal variation...
journal article 2022
document
Rego, Leandro (author), Avallone, F. (author), Ragni, D. (author), Casalino, D. (author)
This paper investigates the mechanisms by which flow-permeable materials provide noise reduction in an installed jet configuration. Numerical simulations are carried out with a flat plate placed in the near field of a single-stream subsonic jet (M<sub>a</sub>=0.3 and M<sub>a</sub>=0.5). The trailing-edge region of the plate is replaced by...
journal article 2022
document
Yunus, F. (author), Grande, E. (author), Casalino, D. (author), Avallone, F. (author), Ragni, D. (author)
A noise footprint prediction framework for propeller-driven aircraft which couples an aerodynamic model and several aeroacoustic models is presented in this study. The aerodynamic model is based on the blade element momentum theory, while the aeroacoustic models are based on a time-domain compact dipole/monopole Ffowcs-Williams and Hawking's...
journal article 2022
Searched for: author%3A%22Avallone%2C+F.%22
(1 - 20 of 77)

Pages