- document
-
Dong, J. (author)Advancements in technology and societal demands have led to increasing complexity, size, and automation in modern industrial systems. This trend makes these systems more safety-critical, as the occurrence of faults in system components or subsystems may cause the entire system to fail, resulting in significant economic losses and casualties....doctoral thesis 2023
- document
-
Dong, J. (author)The treatment of largy bone defect remains challenging in clinics. All the clinically available bone grafts have their own limitations and are not ideal for the treatment. Therefore, developing a new generation of suitable bone substitutes is urgently needed. In the recent years, porous magnesium (Mg) has been extensively studied for orthopedic...doctoral thesis 2023
- document
-
Dong, J. (author), Sharifi K., Arman (author), Mohajerin Esfahani, P. (author)We study a diagnosis scheme to reliably detect the active mode of discrete-time, switched affine systems in the presence of measurement noise and asynchronous switching. The proposed scheme consists of two parts: (i) the construction of a bank of filters, and (ii) the introduction of a residual/threshold-based diagnosis rule. We develop an...journal article 2023
- document
-
Mitici, M.A. (author), Hennink, Birgitte (author), Pavel, M.D. (author), Dong, J. (author)The health management of batteries is a key enabler for the adoption of Electric Vertical Take-off and Landing vehicles (eVTOLs). Currently, few studies consider the health management of eVTOL batteries. One distinct characteristic of batteries for eVTOLs is that the discharge rates are significantly larger during take-off and landing, compared...journal article 2023
- document
-
Putra, N.E. (author), Leeflang, M.A. (author), Klimopoulou, M. (author), Dong, J. (author), Taheri, P. (author), Huan, Z. (author), Fratila-Apachitei, E.L. (author), Mol, J.M.C. (author), Chang, J. (author), Zhou, J. (author), Zadpoor, A.A. (author)The development of biodegradable Fe-based bone implants has rapidly progressed in recent years. Most of the challenges encountered in developing such implants have been tackled individually or in combination using additive manufacturing technologies. Yet not all the challenges have been overcome. Herein, we present porous FeMn-akermanite...journal article 2023
- document
-
Wang, Yi (author), Yang, Zhongping (author), Lin, Fei (author), Dong, J. (author), Bauer, P. (author)Compensation capacitors are naturally susceptible to manufacturing defects and aging effects, leading to the degraded performance of a wireless power transfer (WPT) system. This article focuses on the compensation parameters optimization during the design stage and control strategy during the operation phase to improve the inherent capacitor...journal article 2023
- document
-
Du, Yunlu (author), Huang, Yunkai (author), Guo, Baocheng (author), Peng, Fei (author), Dong, J. (author)This article proposes a nonlinear semianalytical model (SAM) of the multiphase Halbach array axial flux permanent-magnet motor (AFPMM) to speed up the computation of its magnetic field. Compared to the existing analytical models, the proposed nonlinear SAM can directly consider magnetic saturation to obtain more accurate results. To this end,...journal article 2023
- document
-
Yu, G. (author), Dong, J. (author), Soeiro, Thiago B. (author), Bauer, P. (author)This paper introduces variable-frequency zero voltage switching (ZVS) modulation strategy for the four-switch buck+boost converter with one operating pattern for the inductor current, i.e., three-segment inductor current modulation control. The proposed modulation scheme guarantees a smooth transition from step-up to step-down or from step-down...conference paper 2023
- document
-
Yao, Y. (author), Huang, Yunkai (author), Peng, Fei (author), Dong, J. (author), Zhu, Zichong (author)This article proposes a compensation method of position estimation error for high-speed surface-mounted permanent magnet synchronous motors based on robust inductance estimation. The proposed method relies on the variation of the estimated δ-axis back back-electromotive force when a small current is injected into the γ axis. The inductance...journal article 2022
- document
-
Dong, J. (author), Tümer, N. (author), Leeflang, M.A. (author), Taheri, P. (author), Fratila-Apachitei, E.L. (author), Mol, J.M.C. (author), Zadpoor, A.A. (author), Zhou, J. (author)Porous biodegradable Mg and its alloys are considered to have a great potential to serve as ideal bone substitutes. The recent progress in additive manufacturing (AM) has prompted its application to fabricate Mg scaffolds with geometrically ordered porous structures. Extrusion-based AM, followed by debinding and sintering, has been recently...journal article 2022
- document
-
Yao, Yu (author), Huang, Yunkai (author), Peng, Fei (author), Dong, J. (author), Zhu, Zichong (author)In this article, a novel dynamic-decoupled active damping current controller is proposed for an LCL-equipped high-speed permanent magnet synchronous machine. Compared with the conventional stationary current-control method for the LCL-type system, the proposed method is established in the synchronous rotating frame for improving the current...journal article 2022
- document
-
Shi, W. (author), Dong, J. (author), Soeiro, Thiago B. (author), Riekerk, C. (author), Grazian, F. (author), Yu, G. (author), Bauer, P. (author)Due to the urgent desire for a fast, convenient, and efficient battery charging technology for electric vehicle (EV) users, extensive research has been conducted into the design of high-power inductive power transfer (IPT) systems. However, there are few studies that formulate the design as a multiobjective optimization (MOO) research...journal article 2022
- document
-
Yao, Yu (author), Huang, Yunkai (author), Peng, Fei (author), Dong, J. (author)This article proposes a sliding-mode position estimation method for high-speed surface-mounted permanent magnet synchronous machines with LCL filter. The implementation of the LCL filter aims at smoothing the motor current and reducing the iron loss caused by the harmonic currents. First, the discrete-time model of the LCL-filtered motor...journal article 2022
- document
-
Cao, Zhi (author), Huang, Yunkai (author), Guo, Baocheng (author), Peng, Fei (author), Dong, J. (author), Hemeida, Ahmed (author)To facilitate the active magnetic bearing (AMB) design and analysis, an accurate and fast model that considers both rotor eccentricity and the saturation effect is necessary. In this article, a novel hybrid analytical model (HAM) for effective calculation of the magnetic field of the AMB is proposed. Eccentricity and local saturation are...journal article 2022
- document
-
Shi, W. (author), Dong, J. (author), Soeiro, Thiago B. (author), Deng, Junjun (author), Riekerk, C. (author), Bauer, P. (author)Resonant circuits are commonly used in inductive power transfer (IPT) systems for the charging of electric vehicles because of the high power efficiency. Transient behaviors of the resonant circuits, which play a significant role in the design and analysis of IPT systems, are cumbersome to model analytically because of the high-order. This...journal article 2022
- document
-
Li, Chen (author), Mogollón, José (author), Tukker, Arnold (author), Dong, J. (author), von Terzi, D.A. (author), Zhang, Chunbo (author), Steubing, Bernhard (author)Offshore wind energy (OWE) is a cornerstone of future clean energy development. Yet, research into global OWE material demand has generally been limited to few materials and/or low technological resolution. In this study, we assess the primary raw material demand and secondary material supply of global OWE. It includes a wide assortment of...journal article 2022
- document
-
Zhu, Zichong (author), Deng, Jun (author), Dou, Xun (author), Mei, Lei (author), Huang, Yunkai (author), Dong, J. (author)The zero-sequence inductance is a vital parameter for the performance analysis of permanent magnet machines, especially under faulty conditions or in open-winding machines. This paper focuses on the zero-sequence inductance calculation of fractional slot concentrated winding permanent magnet synchronous machines (FSCW-PMSMs), and reveals the...journal article 2022
- document
-
Dong, J. (author), Viré, A.C. (author)The rotor of floating offshore wind turbines with platform motions may undergo different working states during its operation, e.g. from windmill working state to vortex ring and propeller working state. In this paper, an aerodynamic model based on a free wake vortex method is used to simulate the rotor undergoing surge motion. The associated...journal article 2022
- document
-
Grazian, F. (author), Shi, W. (author), Soeiro, Thiago B. (author), Dong, J. (author), Bauer, P. (author)When considering EV wireless charging that uses inductive power transfer with magnetic resonance, the coils’ current distortion must be minimized to guarantee compliance with the electromagnetic compatibility limits on the radiated magnetic field set by the relevant industrial standards. This paper analyzes the current distortion caused by...conference paper 2022
- document
-
Cao, Zhi (author), Huang, Yunkai (author), Peng, Fei (author), Dong, J. (author)Position sensing is one of the crucial parts of the active magnetic bearing (AMB) system. The printed circuit board (PCB) eddy current position sensor is a new type of position sensor for the AMB system, which makes a compact structure, high sensing quality, and is low cost. In this article, an improved driver circuit is proposed for this new...journal article 2022