Searched for: author%3A%22Li%2C+Bin%22
(1 - 9 of 9)
document
Li, Bin (author), Zheng, Yi (author), Di Baldassarre, Giuliano (author), Xu, Peng (author), Pande, S. (author), Sivapalan, Murugesu (author)
Groundwater depletion has become increasingly challenging, and many cities worldwide have adopted drastic policies to relieve water stress due to socioeconomic growth. Located on the declining aquifer of the North China Plain, Beijing, for example, has developed plans to limit the size of the city’s population. However, the effect of...
journal article 2023
document
Wen, Weijie (author), Lyu, Rui (author), Li, Botong (author), Cao, Hong (author), Yu, Jiali (author), Li, Bin (author), Popov, M. (author)
For the black start-up of DC micro-grids, three-phase charging resistors are required to limit the uncontrollable surge current. The main drawback of this start-up method is the difficulty in determining the appropriate resistance value to achieve a rapid start-up and limit the surge current with the change of grid parameters. To address this...
journal article 2023
document
Ren, Mengmeng (author), Kang, Yi (author), Zhao, Junxue (author), Zou, Chong (author), Shi, Ruimeng (author), Li, Bin (author), Roekaerts, D.J.E.M. (author)
Oxy-fuel combustion of coal pyrolysis gas has recently been proposed to serve as internal heat source of a vertical low-temperature pyrolysis furnace, in order to make the output pyrolysis gas nearly free of nitrogen and widely useful. To keep the pyrolysis temperature and the heat carrier gas volume unchanged from air combustion to oxy-fuel...
journal article 2022
document
Li, Bin (author), Guo, Weihong (author), Liu, Xiao (author), Zhang, Yuqing (author), Russell, P.J. (author), Schnabel, Marc Aurel (author)
Having a healthy built environment becomes increasingly important, especially under the effects of COVID-19. This paper intends to combine sustainable goals based on climate change with passive design principles to achieve a healthy built environment regarding the building performance of residential buildings. The Yuedao Residential Community in...
journal article 2021
document
Wen, Weijie (author), Li, Pengyu (author), Cao, Hong (author), Liu, Haijin (author), Wang, Xingguo (author), Lv, Hui (author), Li, Bin (author), Popov, M. (author)
Due to the progressive penetration and usage of renewable sources and loads based on power electronics, medium voltage direct current (MVDC) distribution system is getting broad attention. Direct current circuit breakers (DCCBs) are of vital importance for the reliability and flexibility of power system. With features of low cost and micro...
journal article 2020
document
Li, Bin (author), Jiang, Peng (author), Zhai, Famin (author), Chen, Junhong (author), Bei, G. (author), Hou, Xinmei (author), Chou, Kuo Chih (author)
In this paper, the fabrication and thermal conductivity (TC) of water-based nanofluids using boron (B)-doped SiC as dispersions are reported. Doping B into the <i>β</i>-SiC phase leads to the shrinkage of the SiC lattice due to the substitution of Si atoms (0.134 nm radius) by smaller B atoms (0.095 nm radius). The presence of B in the SiC...
journal article 2018
document
Liu, Quantao (author), Li, Bin (author), Schlangen, E. (author), Sun, Yihan (author), Wu, Shaopeng (author)
In this paper, steel slag/steel fiber composite asphalt mixture were prepared. The effects of the addition of steel slag and/or steel fibers on the mechanical, thermal, induction heating and healing properties of asphalt mixture were investigated. The results showed that adding steel slag and/or steel fibers improves the water stability,...
journal article 2017
document
Xing, Xinming (author), Chen, Junhong (author), Bei, G. (author), Li, Bin (author), Chou, Kuo Chih (author), Hou, Xinmei (author)
Highly pure Al<sub>4</sub>SiC<sub>4</sub> powders were prepared by carbothermic reduction at 2173 K using Al<sub>2</sub>O<sub>3</sub>, SiO<sub>2</sub>, and graphite as raw materials. The obtained Al<sub>4</sub>SiC<sub>4</sub> powders owned hexagonal plate-like grains with a diameter of about 200–300 μm and a thickness of about 2–6 μm. Based...
journal article 2017
document
Wang, M. (author), Li, Honghai (author), GAO, Jian (author), Huang, Zichao (author), li, Bin (author), van Arem, B. (author)
It is expected that automated vehicles will gradually penetrate on public roads, resulting in mixed traffic in the next decades. This can impact traffic flow operations, especially the roadway capacity and flow stability. It is of paramount<br/>importance to understand and predict the implications of automated driving systems on traffic flow at...
conference paper 2017
Searched for: author%3A%22Li%2C+Bin%22
(1 - 9 of 9)