Synthesis, solubility and thermodynamic properties of N-A-S-H gels with various target Si/Al ratios

The synthesis of N-A-S-H gel with high Si/Al ratios (>2) has been rarely reported in the literature, leaving the establishment of a reliable synthesis route as an open challenge. This paper aims to synthesize N-A-S-H gels with Si/Al ratios ranging from 1 to 3 and establish their thermodynamic database. The effects of reaction temperature,...

Report of RILEM TC 281-CCC: outcomes of a round robin on the resistance to accelerated carbonation of Portland, Portland-fly ash and blast-furnace blended cements

Many (inter)national standards exist to evaluate the resistance of mortar and concrete to carbonation. When a carbonation coefficient is used for performance comparison of mixtures or service life prediction, the applied boundary conditions during curing, preconditioning and carbonation play a crucial role, specifically when using latent...

Synthesis of alkali-silica reaction (ASR) products and the role of Al and Li in mitigating ASR

Using Al-rich supplementary cementitious materials to partially replace Portland cement is a well-established empirical approach to mitigate expansion of concrete caused by alkali-silica reaction (ASR). However, the mechanisms behind it are still not completely understood. Synthesis of ASR products in the laboratory provides a unique opportunity...

Reactions of self-healing agents and the chemical binding of aggressive ions in sea water: Thermodynamics and kinetics

New self-healing agents that can chemically bind seawater ions invading cracked cementitious materials were proposed. The potential of self-healing and binding of seawater ions were investigated by thermodynamic modeling. It was found that CaO-NaAlO₂ and CaO-metakaolin agents can have Cl⁻, SO₄²⁻ and...

Understanding the carbonation of concrete with supplementary cementitious materials: a critical review by RILEM TC 281-CCC

Blended cements, where Portland cement clinker is partially replaced by supplementary cementitious materials (SCMs), provide the most feasible route for reducing carbon dioxide emissions associated with concrete production. However, lowering the clinker content can lead to an increasing risk of neutralisation of the concrete pore solution and...