Searched for: contributor%3A%22Song%2C+Y.+%28mentor%29%22
(1 - 20 of 37)

Pages

List view
Grid view
document
Sheng, Qing (author)
Breast pumps are often used by nursing mothers as breastfeeding support in lactation. However, breast pumping is sometimes not a pleasant journey for mothers. Pump-related discomfort and pain were reported by many women. The goal of this project is to solve pump-related problems and optimise breast pumping ergonomic comfort by reducing...
master thesis 2022
document
van de Ven, Rick (author)
The research described in this thesis explores the field of 3D printing technologies in the fabrication of printed, flexible tactile sensors and explores new possibilities and opportunities in the fabrication. The research is aiming at new ways of applying 3D printing fabrication techniques to develop easily applicable sensing structures to...
master thesis 2021
document
Gupta, Yaman (author)
The 3D Head-scanner is designed with the intent to scan a customer’s head such that the client can design personalized glasses using the generated mesh. The uniqueness of this process is due to the fact that the customers are uniquely disabled and therefore unable to clearly announce their comfort levels. The goal of this project is to design a...
master thesis 2021
document
Kwa, F.S.S. (author)
This thesis describes the design and development of an accurate and low cost 4D foot scanner in the context of podiatry. The intention is to make a first step towards the development of an affordable 4D foot scanner with commercial grade performance at a low cost, using commodity hardware. By doing so, 4D scanning can hopefully become more...
master thesis 2021
document
De Jonghe, Orelio (author)

Short-haul flights are currently one of the most carbon-intensive modes of travel. Weight and fuel economy are closely linked. Therefore, weight reduction in the aviation industry is one of the critical factors in making commercial aviation more sustainable.
 This project focuses on aircraft efficiency by developing a lightweight aircraft seat...
master thesis 2021
document
Sarwin, Dennis (author)
Purpose<br/>As a result of the worldwide aging population, Vertebral Compression Fractures (VCF) are commonly detected in osteoporotic patients; these can originate from traumatic events or occur spontaneously. The existing VCF devices and their corresponding surgical instruments have their limitations in terms of short- and long-term...
master thesis 2021
document
Zevenbergen, Alex (author)
In 2010, an estimated 15 million infants were born prematurely, which makes up 10% of all childbirths that year. Just in the Netherlands there were 11,530 preterm births in 2018. Since these children should be spending additional months inside of the uterus, they are delicate and need to grow until near regular gestational age inside of an...
master thesis 2020
document
He, Yufei (author)
master thesis 2020
document
Foppen, Rosan (author)
Falls in the elderly are a leading cause of injury, affecting one in three older adults annually. These fall incidents can lead to various disabling conditions, and therefore have the ability to affect one’s quality of life and independence. Not only are falls potentially taxing to the individual, they are also responsible for a big portion of...
master thesis 2020
document
Ribbers, Tamara (author)
A problem at the VUmc hospital in Amsterdam is that some patients become unrecognizable after the surgery. It is hard for surgeons to explain during the consultation how and how much the patients will change due to the surgery. Partly, because the surgeons cannot predict if the patient will become unrecognizable. Therefore, they tell them that...
master thesis 2020
document
Weiss, A.J. (author)
This thesis puts forward a design for an affordable 3D scanner that can easily capture accurate 3D models of the human hand. Such 3D scans are a requirement for designing and manufacturing personalised products, which open up a new world of design possibilities by tailoring products specifically to a single person. An example of such a product...
master thesis 2017
document
Boekraad, R. (author)
A recent development on the field of additive manufacturing is the ability to print conductive materials alongside non-conductive materials, predominantly plastics. With the addition of the possibility to insert external components during the manufacturing process, this allows for the integration of mechanical and electrical functionality into a...
master thesis 2017
document
Spijkerman, B. (author)
Discus throwing outdoors provides the coach and athlete with direct feedback on the performance in the form of a final distance. Even by eye this can intuitively be judged. When switching to indoor training come winter, this intuitive measure is taken away as the athletes throw into a net suspended 5–8 metres in front of them. The coach believes...
master thesis 2017
document
Marinkovic, E. (author)
The aim of the following project was to investigate the acceptability of an infant wearable as a consumer market product for the Philips Avent uGrow range. Infant wearables are a new technology, and although some currently exist on the market (mainly spearheaded by startups), it is unclear whether this would be a good direction for Philips to...
master thesis 2016
document
Aerts, W.F. (author)
The project’s assigment was to outline a strategy for BMC Switzerland AG, a Swiss performance bicycle manufacturer, on how to develop ‘digital’ product services- and capabilities. In consultation with the company, the project has focussed specifically on product-monitoring- and maintenance applications and the development of cloud services for...
master thesis 2016
document
Essers, T.T.W. (author)
The gloss-capturing prototype was a first step towards the reproduction of the gloss levels in different parts of the painting and the basic principles were verified with this system. However, it was not yet an integrated system with the 3D fine art scanner. For this thesis the different components of the gloss scanner have been analyzed and...
master thesis 2016
document
Roussos, L. (author)
master thesis 2016
document
Lam, M.L.J. (author)
A 3D scanner for paintings was previously developed. The developed 3D scanner utilises fringe projection and stereo imaging technique. The system consists of a projector for projecting the fringe patterns and two cameras for capturing. However the usage of this scanner required a lot of user intervention, which made the scanning process a...
master thesis 2016
document
Hilhorst, D. (author)
Obtaining a digital 3D model of the hand can be useful for a variety of applications. In this project, the goal was to produce 3D surface scans that are suitable for usage in the fields of Anthropometry, Orthotics and Ergotherapy & Revalidation. To this end a new iteration of a photogrammetry-based 3D hand scanner was developed, with the focus...
master thesis 2016
document
De Vries, A.L.E. (author)
This report provides details of the embodiment design process, including analysis, ideation, development and validation, of a 3D hand scanner. 3D scanning, the process of creating a digital 3D model of a physical object, has opened up new possibilities for personalised products and improved diagnostics in healthcare. Since the hand poses unique...
master thesis 2016
Searched for: contributor%3A%22Song%2C+Y.+%28mentor%29%22
(1 - 20 of 37)

Pages

List view
Grid view