Searched for: department%3A%22Electronic%255C+Instrumentation%22
(1 - 20 of 54)

Pages

document
D'Urbino, M. (author)
This work presents an architecture capable of digitizing every channel of an ultrasound transducer array independently and simultaneously. This feature is achieved by exploiting the frequency response of the piezoelectric transducer in order to save area and reduce to a minimum the required building blocks of the ADC. The transducer is used as...
master thesis 2017
document
Angevare, J.A. (author)
A highly digital temperature sensor, based on the thermal diffusivity of silicon, for thermal management applications has been reported. Recently, Thermal-Diffusivity based temperature sensors have undergone a radical change from an analog-based readout architecture to a more digital VCO-based one. However the more digital approach led to...
master thesis 2015
document
Van Vroonhoven, C.P.L. (author)
This thesis describes the theory, design and implementation of a new class of integrated temperature sensors, based on heat diffusion. In such sensors, temperature is sensed by measuring the time it takes for heat to diffuse through silicon. An on-chip thermal delay can be determined by geometry and the thermal diffusivity of silicon, and since...
doctoral thesis 2015
document
Shahi, B. (author)
This thesis describes techniques to reduce the offset error in precision instrumentation and operational amplifiers. The offset error which is considered a major error source associated with gain blocks, together with other errors are reviewed. Conventional and newer approaches to remove offset and low frequency noise are discussed, with a focus...
doctoral thesis 2015
document
Bosma, B. (author), Scoop, M.C. (author)
Increasing physical performance in this day and age is aided by technology. The GonioTrainer is a device which will measure a joint angle and give the user visual feedback on a smartphone, real time haptic feedback using a feedback module, and elaborate visual feedback on a computer or tablet after a session of usage. This device will consist...
bachelor thesis 2015
document
Markenhof, J. (author)
Dark current noise in image sensors is highly sensitive to temperature, and a difference in temperature in image sensors can be seen in the image as a non-uniform noise source. Many CMOS image sensors are integrated in mobile devices and lack a physical shutter to generate dark frame subtraction to compensate for dark current noise. In this...
master thesis 2015
document
Schilken, I. (author), Miedema, R.D. (author)
De GonioTrainer is een systeem dat mensen helpt om een beter inzicht te krijgen in hun bewegingen. Het bestaat uit een sensor module en een feedback module die beide op het lichaam worden bevestigd. Ze worden draadloos uitgelezen en aangestuurd door een smartphone. Er is gekozen voor een Bluetooth Low Energy verbinding tussen de modules en en...
bachelor thesis 2015
document
Hogenhout, G. (author), Hogenhout, K. (author)
Deze thesis is geschreven in het kader van het bachelor eindproject van de TU Delft in samenwerking met het bedrijf IT Motions. De opdracht van dit bedrijf was een prototype te ontwikkelen van Babyshell. BabyShell is een apparaat dat moeders uit derdewereldlanden advies geeft tijdens de zwangerschap en verder helpt met het (op)voeden van hun...
bachelor thesis 2015
document
Kester, D.M. (author), Overdevest, J. (author)
In speed skating, the frontal area of the athlete is one of the major factors that influences the aerody- namic drag he/she experiences [1]. The athlete can minimise the frontal area by going lower, and thus bending more his/her knees. O’Sports would like to manufacture the GonioTrainer, a device that will measure the knee of the skater and...
bachelor thesis 2015
document
Ramachandra Rao, P. (author), Milosavljevic, S. (author), Kroth, U. (author), Laubis, C. (author), Nihtianov, S. (author)
Newly developed “pure-boron” photodiodes, with high sensitivity and stability in the whole ultraviolet range (UV), are described. The main purpose of this work is to create and characterize a large-area UV photodiode, representing a structure of a pixel in a backside illuminated CMOS image sensor, featuring maximum fill factor and hence...
lecture notes 2014
document
Lemmens, E. (author), Jansen, M. (author)
This bachelor thesis describes the development of a sensor system for measuring the cell concentration in small bio-reactors. The study was conducted at Delft University of Technology on behalf of Applikon Biotechnology B.V. The MicroMatrix of Applikon is used for experimental determination of the optimal conditions for bioprocesses in...
bachelor thesis 2014
document
Van den Hoorn, J.C. (author), Van der Kemp, J.W.F. (author)
This thesis describes a bachelor graduation project of the study Electrical Engineering at Delft University of Technology. The purpose of this project is to develop an impedance sensor that can measure the cell concentration in a micro-bioreactor. This bioreactor will be used to investigate the optimal cell growth conditions of a cell culture....
bachelor thesis 2014
document
Keijsers, J.G.M. (author), Mahabir, A.S.U. (author)
This thesis was written for the bachelor’s final project, of the study Electrical Engineering. It describes the design of a cell concentration sensor. A proof of concept was designed which is able tomeasure the cell concentration of yeast in a suspension by using sensors which measure the impedance and optical properties of the suspension. The...
bachelor thesis 2014
document
Van der Reek, M. (author), Dreef, K. (author)
Op het moment zijn er geen gebruiksvriendelijke en betaalbare producten die de prestaties van een roeier kunnen meten op het water. In dit bachelor afstudeerproject wordt de software besproken die is ontworpen voor Android 4.4. Hier worden de keuzes die zijn gemaakt voor de software toegelicht. Met behulp van de verkregen kracht en hoek van de...
bachelor thesis 2014
document
Oosterhuis, B.F. (author), Schaper, K.P. (author)
Voor het meten van roeiprestaties in een roeiboot zijn op dit moment slechts dure en complexe systemen beschikbaar. Het doel van dit project is het ontwerpen van een systeem dat de roeier feedback geeft over zijn roeiprestaties. Dit systeem moet betaalbaar zijn en eenvoudig te gebruiken. Voor het bepalen van het vermogen dat een roeier levert,...
bachelor thesis 2014
document
Van 't Hof, S.A. (author)
Colorectal anastomotic leakage is one of the most feared complications after colorectal surgery and is associated with increased morbidity, prolonged hospital stay and risk of local cancer reoccurrence. One out of ten anastomoses leak, leading to infections. Colorectal anastomotic leakage is currently diagnosed by sniffing and watching drain...
master thesis 2014
document
Ten Have, E.S. (author)
This thesis investigates a novel deformable mirror that works on the basis of the electrostatic deformation of a liquid surface. The liquid mirror allows large surface displacements, a large number of actuators, and the modification of its properties, while at the same time the mirror design is simple and may be realized without sophisticated...
doctoral thesis 2014
document
Wu, J. (author)
Wind sensors are widely used in many critical applications, such as navigation, weather forecast, aerospace and wind energy assessment. The thermal wind sensor can measure wind speed and direction at the same time, by measuring the temperature gradient on the sensor’s surface which is induced by the wind flow. Compared to traditional mechanical...
master thesis 2013
document
Markenhof, J. (author), Van der Meulen, J. (author), De Vries, C. (author)
In deze bachelorthesis wordt een ontwerp gepresenteerd van draadloze communicatie voor een draadloos sensorsysteem voor het automatisch meten van pH en temperatuur. Het is gelukt een volledig passieve RFID tag te selecteren en deze te integreren in een PCB ontwerp met de andere onderdelen van het sensorsysteem. Op basis van een proof of concept...
bachelor thesis 2013
document
Palacios Aguilera, N.B. (author)
Packaging has evoluted for years with the sole purpose of protecting the electronics from the environment and providing a suitable operating environment. Integration became a necessity and technologies as System-in-Package emerged and enabled the integration of components built with different technologies within a single package. All this...
doctoral thesis 2013
Searched for: department%3A%22Electronic%255C+Instrumentation%22
(1 - 20 of 54)

Pages