Experimental study of surface modification in a fully turbulent Taylor-Couette flow

Friction measurements were performed in a Taylor-Couette setup. Drag reduction was obtained with a riblet surface and indicated a drag reduction for a wide range of shear Reynolds numbers, with a maximum of 5.3% at Re_s=47000 (s+=14). Tomographic PIV verified that the friction coefficients are strongly related to the flow regimes and structures....

Turbulent Taylor–Couette flow over riblets: Drag reduction and the effect of bulk fluid rotation

A Taylor–Couette facility was used to measure the drag reduction of a riblet surface on the inner cylinder. The drag on the surfaces of the inner and outer cylinders is determined from the measured torque when the cylinders are in exact counter-rotation. The three velocity components in the instantaneous flow field were obtained by tomographic...

The life of Taylor–Couette flow structures in 3D

Time-resolved tomographic PIV was used to investigate the time evolution of turbulent flow structures in Taylor-Couette flow. Turbulence is created by the shear due to exact counter rotation of the cylinders, where the mean velocity is zero in the bulk flow. This enables to observe the structures longer than many other turbulent flow types,...

Spatial resolution and dissipation rate estimation in Taylor–Couette flow for tomographic PIV