Three-dimensional characterization of grain boundaries in pure nickel by serial sectioning via mechanical polishing

Five macroscopic boundary parameters can be extracted from three-dimensional orientation maps. Serial sectioning, which includes consecutive steps of material removal, and electron backscatter diffraction (EBSD) measurement were employed to extract a stack of two-dimensional sections of a pure nickel sample. The EBSD patterns were collected from...

Smoothing of X-ray diffraction data and K (alpha)2 elimination using penalized likelihood and the composite link model

X-ray diffraction scans consist of series of counts; these numbers obey Poisson distributions with varying expected values. These scans are often smoothed and the K2 component is removed. This article proposes a framework in which both issues are treated. Penalized likelihood estimation is used to smooth the data. The penalty combines the...

Comparison between a near-field and a far-field indexing approach for characterization of a polycrystalline sample volume containing more than 1500 grains

A comparison of the performance of X-ray diffraction tomography, a near-field diffraction technique, and a far-field diffraction technique for indexing X-ray diffraction data of polycrystalline materials has been carried out by acquiring two sets of diffraction data from the same polycrystalline sample volume. Both approaches used in this study...

Orientation dependence of the martensite transformation in a quenched and partitioned steel subjected to uniaxial tension

The orientation dependence of the austenite-to-martensite transformation during uniaxial tensile testing was modelled using the phenomenological theory of martensite crystallography and the mechanical driving force. It was validated experimentally by means of electron backscatter diffraction measurements on a pre-defined zone of a quenched and...

High-resolution X-ray diffraction investigation on the evolution of the substructure of individual austenite grains in TRIP steels during tensile deformation

The martensitic transformation behaviour of the metastable austenite phase in low-alloyed transformation-induced plasticity (TRIP) steels has been studied in situ using high-energy X-ray diffraction during deformation. The austenite stability during tensile deformation has been evaluated at different length scales. A powder diffraction analysis...

Position-dependent shear-induced austenite– martensite transformation in double-notched TRIP and dual-phase steel samples

While earlier studies on transformation-induced-plasticity (TRIP) steels focused on the determination of the austenite-to-martensite decomposition in uniform deformation or thermal fields, the current research focuses on the determination of the local retained austenite-to-martensite transformation behaviour in an inhomogeneous yet carefully...

A note on medieval microfabrication: The visualization of a prayer nut by synchrotron-based computer X-ray tomography

One of the most fascinating objects in the Rijksmuseum (Amsterdam, The Netherlands) is an early 16th century prayer nut. This spherical wooden object measures 4 cm in diameter and consists of two hemispheres connected with a small hinge so that it can be opened. The interior of the nut holds wood carvings with scenes from the life of Christ....

Relics in medieval altarpieces? Combining X-ray tomographic, laminographic and phase-contrast imaging to visualize thin organic objects in paintings

X-ray radiography is a common tool in the study of old master paintings. Transmission imaging can visualize hidden paint layers as well as the structure of the panel or canvas. In some medieval altarpieces, relics seem to have been imbedded in the wooden carrier of paintings. These are most probably thin organic fibrous materials such as paper...