Searched for: project%3A%22EE3L11%22
(1 - 20 of 21)

Pages

document
Bouma, Eline (author), Damoiseaux, Luke (author), Groeneveld, Jorik (author)
The increase in non-linear loads of modern electronics raises concerns over power quality. Additionally, existing power-quality analyzers are expensive and not intended for household use. This thesis aims to develop a single-phase, user-friendly power-quality analyzer using a Raspberry Pi 4 Model B with an emphasis on low cost and class S...
bachelor thesis 2024
document
Akaouche, Anass (author), Hameed, muasser (author)
This report presents an energy transition model that emphasizes the importance of prioritizing innovation. It demonstrates the potential energy savings achievable through the installation of insulation layers. Additionally, it explores the increasing adoption of electric vehicles (EVs) and its influence on energy consumption within the...
bachelor thesis 2023
document
de Waal, Jeremy (author), Rauf, Namo (author)
Before the project was started, there was an energy system integrator demonstrator. This demonstrator was purely software, there was no physical interaction possible with it. It demonstrated the energy system by simulations. The objective of this project was to design and built peripherals that represents the components of an energy system....
bachelor thesis 2023
document
van Veen, Joost (author), Goudzwaard, Yannick (author)
The goal of this thesis is to develop a ROS package that facilitates the control and navigation of a Duckiebot robot. With the rise of robot swarms the need for autonomous charging system for robots is increasing. An implementation for decentralised autonomous behaviour for a Duckiebot for a wireless charging system in a Duckietown environment...
bachelor thesis 2023
document
du Plessis, Nicolaas (author), Roos, Martijn (author)
This thesis aims to solve the problem of designing the hardware for a wireless charging system to be used for keeping an autonomous robot swarm alive. Previous designs available to us lacked essential safety features and were very specific in their application. Current wireless charging specifications are also not sufficient to cater to the...
bachelor thesis 2023
document
Mazurovs, Maxim (author), Schat, Daan (author)
This thesis presents the design and development of a UV-C LED-based seed treatment machine aimed at enhancing seed quality by the extermination of pathogens. The research covers design choices, including a round irradiation pattern, consisting of two rings with three and nine LEDs for the inner and outer ring respectively, the use of a quartz...
bachelor thesis 2023
document
Kopar, Cahit Tolga (author), Rugge, Daniël (author), Rozema, Mischa (author)
In the past decades, the workload and the pressure on medical personnel has been growing to an unprecedented peak. This is partly due to the ageing population and the increasing capabilities to be independent at an older age, increasing the age people enter nursing homes. This paper focuses on a novel way to detect incidents that could occur in...
bachelor thesis 2023
document
Ergül, Erman (author), van Weelderen, Erik (author)
In this thesis for the Bachelor’s Degree in Electrical Engineering, a Control Unit (PCB and software) is designed for inside the UVC Seed Disinfection Machine of Team UVO. The machine consists of four modules: the Control Unit, the LED Driver, the motor controller and the power supply. The Control Unit allows a user to input the intensity per...
bachelor thesis 2023
document
Neji, Saliha (author), Kooij, Roeland (author)
This thesis analyses different radar systems for sensing chest movement to detect human presence inside a car. The detection in this thesis is limited to sensing breathing rate, although heartbeat detection is considered a possibility. A comparison is made between CW-, FMCW-, pulsed- and UWB pulsed radar. UWB pulsed radar was chosen to be a...
bachelor thesis 2020
document
Eveleens, Richard (author), Gottmer, Leila (author), Haarman, Mart (author)
This thesis report focuses on possible methods of digital implementation of motional feedback in a bass loudspeaker. In this thesis, the control system will be created for a monopole and a dipole speaker specifically. It does so by sketching the outlines of such a system and examining possible designs for the components required to suppress...
bachelor thesis 2020
document
Vette, Marek (author)
This thesis is part of the development of a sensor system for measuring currents in the Nuna solar car. A big problem within this system is the processing of incoming sensor data. Therefore, a solution in the form of a sensor-data-processing-unit was proposed, with its primary focus on the analog-to-digital conversion. The converter should not...
bachelor thesis 2018
document
Treffers, Michael (author), Melman, Bart (author)
Current trailers and caravans use overrun brakes, which cause overheated brakes in the mountains. A solution is to design an electric brake system in which the brakes are controlled electronically instead of mechanically. The report discusses the control models associated with braking, anti-sway detection and velocity sensor fusion. The RDW...
bachelor thesis 2017
document
Hosman, T.B. (author), van Staveren, J. (author)
In the summer of 2016, a solar-powered charging station for e-bikes (both wired and wireless) and e-scooters will be built on the campus of Delft University of Technology. This station is also meant to provide a testing facility for future projects. The station has a number of systems that generate data: the power electronics (including the...
bachelor thesis 2016
document
Kunkels, L.B. (author), Belier, J.H. (author)
This study is done as part of creating a groundwater-analyzing sensor system. This thesis elaborates on finding a cost-efficient way of implementing a telecommunications channel between a measuring node and a data-server, together with forming an energy-efficient power supply system that powers a system over a cable of 60metres. The cellular...
bachelor thesis 2016
document
Brouwer, D. (author), Veselka, D. (author)
De opkomst van e-bikes doet de vraag naar oplaadpunten sterk toenemen. Hierbij speelt duurzaamheid een grote rol in de stroomvoorziening van deze oplaadpunten. Hierom wordt er op de TU Delft campus een oplaadstation gebouwd die zijn energie voornamelijk van zonnepanelen ontvangt. Dit zal een proeftuin zijn voor gelijksoortige toekomstige...
bachelor thesis 2016
document
de Moor, T. (author), el Mehdi, N.A. (author)
In deze thesis wordt het ontwerpproces van het Bachelor Afstudeer Project beschreven. De bedoe- ling van dit project is om een softwaresysteem te maken voor een oplaadstation voor elektrische fietsen. Het speciale aan dit oplaadstation is dat de fietsen voornamelijk opgeladen worden door energie opgewekt door zonnepanelen. Een gebruiker moet bij...
bachelor thesis 2016
document
de Jong, R.J. (author), Zwart, D.J. (author)
This thesis shows the successful development of an acoustic channel model to be used for optimisation of localisation. It uses an eigenray approximation, implemented as the image source method to determine a channel impulse response. The image source method however limits the model to environments which can be reduced to cuboid shaped rooms as...
bachelor thesis 2016
document
Hettema, B. (author), Bouwmeester, W. (author)
This thesis work focuses on the development of reference data and visualization software to implement a user friendly probe to image the electrical parameters (i.e., permittivity) of biological materials, such as the skin. The reference data is used for the creation of a lookup table that can be used to quickly derive the relative permittivity...
bachelor thesis 2016
document
Jones, J.C. (author), Karman, D. (author)
When modelling the propagation of an underwater acoustic signal the effects of the hardware that generated and detected it need to be taken into account. This enables one to isolate and remove the effects of the hardware on a channel measurement test signal when performing underwater localisation, allowing for a more effective analysis of the...
bachelor thesis 2016
document
Overwater, R.W.J. (author), Rosema, Y. (author)
Nowadays, the digital possibilities to implement control systems are easier to understand and results can be achieved quicker than in the 1970’s, when Philips was experimenting with motional feedback speakers. This thesis covers the feedback system of a digital implementation of a motional feedback system for speakers. After the design choices...
bachelor thesis 2016
Searched for: project%3A%22EE3L11%22
(1 - 20 of 21)

Pages