Pages
- 1
- 2
- document
-
Dinklo, Constantijn (author)Computation Fluid Dynamics (CFD) simulations are used in a diverse set of fields such as aerodynamics, automotive, biomedical engineering and wind impact. With the advancements in technology the scale of these simulations has increased significantly. This has resulted in \textit{massive} CFD simulations --- simulations that do not fully fit...master thesis 2024
- document
-
Rengarajan, Sudharsan Bharatwaj (author)The hunt for new methods to harness wind energy is at an all-time high as wind energy quickly overtakes other renewable energy sources. Deep waters are promising alternatives with higher average wind speed (thus, higher yields) and also due to lesser availability of land on shore. Even though the design of the blades and rotor of a FOWT is...master thesis 2023
- document
-
Mauro, F. (author), Valentina, Enrico Della (author), Ferrari, Victor (author), Begovic, Ermina (author)The increasing demand for offshore operations in deep water implies the necessity to predict station-keeping ability of offshore vessels since the early stages of design. To this end, besides developing sufficiently fast and accurate methodologies for the equilibrium resolution of the forces acting on the ship, it is of utmost importance to...journal article 2023
- document
-
Vesper, J.E. (author)Physical Vapor Deposition (PVD) is the resublimation of a substance on a cold surface coating it with a thin solid layer. PVD coatings are utilized in industry to modify surface properties and appearance. Since the industrial process requires vacuum conditions, it has been mainly conducted in a batch process. Recently, PVD is considered a...doctoral thesis 2022
- document
-
Wilkens, Laurent (author)This work sets out the creation, verification and demonstration of an automated end-to-end tool for the multi-point fluid-dynamic optimization of turbomachinery. Taking into account multiple operating conditions during optimization aims to benefit the overall performance of turbomachines which are characterized by off-design operation and to...master thesis 2022
- document
-
van den Hoed, wouter (author)During the last years the demand for vegetarian products has increased. A subgroup of these vegetarian products consists of meat analogs, which are products that resemble meat in its functionality and are prepared in a similar fashion. One of the companies producing these meat analogs is Rival Foods. Rival Foods has been working on a production...master thesis 2022
- document
-
Hosseini, A. (author), Dhiman, Vinod (author), Meijer, Koen (author), Zeilstra, Christiaan (author), Hage, Johannes (author), Peeters, Tim (author), Offerman, S.E. (author), Yang, Y. (author)A three-dimensional computational fluid dynamics (CFD) model for the HIsarna off-gas system is set up and validated by real plant data. In the model detailed reaction mechanism and kinetic data for post-combustion of CO-H2 mixture and carbon particles are incorporated. The results are presented and discussed in another study (Part 1) by the...journal article 2022
- document
-
Hur, C. (author), Ferreira, Carlos (author), Schepers, Gerard (author)Horizontal axis wind turbines (HAWTs) experience yaw misalignments due to the physical limitations of yaw controllers and various novel active yaw controls. Moreover, the motion of floating offshore wind turbines (FOWTs) accelerates yaw misalignment. The blade element momentum (BEM) method is widely used due to its computational efficiency for...journal article 2022
- document
-
Sala, Arianna (author)As the need for abundant and reliable renewable energy increases, there is a growing interest in floating wind turbines, which would allow to harness the wind resource in areas where bottom-founded wind turbines cannot be used. However, the movements of the platform are expected to cause unsteady aerodynamics effects, including different wake...master thesis 2021
- document
-
Kramer, O.J.I. (author)In drinking water treatment plants, multiphase flows are a frequent phenomenon. Examples of such flows are pellet-softening and filter backwashing where liquid-solid fluidisation is applied. A better grasp of these fluidisation processes is needed to be able to determine optimal hydraulic states. In this research, models were developed, and...doctoral thesis 2021
- document
-
Aarts, Aukje (author)During the last decades, the development of high-rise increased quickly. The Eurocode is frequently used to make wind calculations for high-rise structures. To make those calculations, the dynamic wind load is simplified to a conservative equivalent static load. An alternative to calculate wind loads is a physical wind tunnel test. Wind tunnel...master thesis 2021
- document
-
Zou, P. (author), Bricker, J.D. (author), Uijttewaal, W.S.J. (author)The interaction between an oceanic internal solitary wave (ISW) and a prototype submerged floating tunnel (SFT) is numerically investigated. Effect of oceanic internal solitary wave amplitude, the relative distance of the SFT to the pycnocline, cross-sectional geometry of the SFT, and the density ratio of the two fluid layers are analyzed. At...journal article 2021
- document
-
Opsomer, Aviva (author)Rising temperatures due to climate change and the increased Urban Heat Island (UHI) effect both have a major impact on Singapore’s outdoor comfort. Research has reported an average UHI in Singapore of 4°C, which can even exceed 7°C at some times of the day. (Acero & Ruefenacht, 2017) Increasing convective surface heat transfer from the human...master thesis 2020
- document
-
De Tavernier, D. (author), Ferreira, Carlos (author)This paper presents a new dynamic inflow model for vertical-axis wind turbines (VAWTs). The model uses the principle of Duhamel's integral. The indicial function of the inflow- and crossflow-induction required to apply Duhamel's integral is represented by an exponential function depending on the thrust coefficient and the azimuthal position....journal article 2020
- document
-
Ballapur Jayasimha, Athreya (author)Horizontal Axis Wind Turbines (HAWTs) are a very popular source of renewable energy, but these machines are often subject to off-design conditions owing to the unsteady nature of wind. Unsteady aerodynamic conditions have been associated with cyclic loading of turbine blades, which can have hugely detrimental effects on their operational life....master thesis 2020
- document
-
Sprong, Geert (author)The bulbous bow is a common feature for large displacement vessels. The purpose of the bulbous bow is to reduce the bow wave, hereby making use of wave cancellation theory. The main drawback of these type of bows is that the drag reduction effect is only present for a limited range of sailing speeds. If the transit velocity is altered, the...master thesis 2019
- document
-
Yu, W. (author), De Tavernier, D. (author), Ferreira, Carlos (author), van Kuik, G.A.M. (author), Schepers, J.G. (author)Two new engineering models are presented for the aerodynamic induction of a wind turbine under dynamic thrust. The models are developed using the differential form of Duhamel integrals of indicial responses of actuator disc type vortex models. The time constants of the indicial functions are obtained by the indicial responses of a linear and...journal article 2019
- document
-
Wang, Boyao (author)In dredging operation, the high-pressure water jet is widely used for the excavation of soil. To study the jetting process and optimize the dredging devices, the moving vertical water jet penetrating cohesive soil experiments were carried out by Nobel (2013). However, in terms of the design optimization for the dredging...master thesis 2019
- document
-
Rubino, A. (author)The need to meet the increasingly demanding sustainability goals entails remarkable new challenges for technical innovation. Due to the crucial role of turbomachinery in present and future energy scenarios, advancements in turbomachinery performance by means of design methods represent a fundamental step towards global sustainable development....doctoral thesis 2019
- document
-
Cointe, Benoit (author)The main goal of this master thesis is to reproduce by CFD computations the characteristic cavitation dynamics in a venturi which were experimentally discovered at TU Delft by Jahangir and al. The different cavitation regimes were obtained by modifying the global static pressure and flow velocity in the flow loop. Based on this, three different...master thesis 2018
Pages
- 1
- 2