- document
-
Verburg, Jordan (author)<b>Introduction:</b> In this research 3D models of oral maxillofacial (OMF) oncologic surgery specimens were created and registered onto preoperative CTs in their correct anatomical position. Histopathology information regarding gross section slices and margin status was included to create a comprehensive 3D model. This model was subsequently...master thesis 2024
- document
-
Pimpalkar, Adhiraj (author)Wire arc additive manufacturing (WAAM) is attributed to higher material deposition rates and medium to large build volumes. Integration of multi-axis (more than three) material deposition kinematics in WAAM can bring a paradigm shift in the metal additive manufacturing industry. The material build-up mechanism employing directed energy...master thesis 2024
- document
-
Alderliesten, Floris (author)This project focuses on the exploration and development of an assistive device that allows the use of 3D scanning in the creation of personalized orthoses for spasticity patients.<br/><br/>Spasticity is the symptom of various neurological diseases and is characterized by a prolonged contraction of the muscles. For upper limb spasticity, this...master thesis 2024
- document
-
van Es, Ruben (author)Current earphone designs follow a universal approach, which might fit average body shapes comfortably but lead to discomfort for others. Leveraging technologies like AI, simulations, and digital models enables efficient creation of personalized products at scale (Sony, 2018). With the development of new AM techniques, printing options are...master thesis 2023
- document
-
Dooley, Erin (author)Prostheses and orthoses are trending towards digital methods and automation. Adopting these methods is especially a challenge at Frank Jol, a clinic where patients' wide variety in residual limb characteristics and high activity demands pose a challenge for digital workflows which utilise 3D scanning to arrive at a final prosthesis. This is...master thesis 2023
- document
-
Souparnika, Abhijith (author)This thesis project was carried out as a part of Ultrapersonalised Products & Services (nextUPPS.nl) as a collaboration between TU Delft and Bata Industrials B.V. To integrate new technologies of Industry 4.0 to enhance product and user experience, Bata Industrials, with a facility in Best, Netherlands, partnered with nextUPPS. An...master thesis 2023
- document
-
Ullmer, Patrick (author)Building energy regulations worldwide are increasingly advocating for better-insulated facades since improved insulation in facades can significantly reduce a building’s heating energy demand. However, research indicates that super-insulated buildings are already at risk of overheating due to high internal heat storage and low heat loss. In...master thesis 2023
- document
-
Busser, Patrick (author)Maatbril delivers personalized 3D-printed glasses by making a 3D scan of their client’s head and modelling the glasses around this 3D model. This is especially handy for people with cranio-facial differences or other conditions that prevent them from wearing regular glasses. A large proportion of Maatbril’s clients are children and/or have a...master thesis 2023
- document
-
Smulders, M. (author), van Dijk, L.N.M. (author), Song, Y. (author), Vink, P. (author), Huysmans, T. (author)When designing wearables that interface with the human head, face and neck, designers and engineers consider human senses, ergonomics and comfort. A dense 3D pressure discomfort threshold map could be helpful, but does not exist yet. Differences in pressure discomfort threshold for areas of the head, neck and face were recorded, to create a 3D...journal article 2023
- document
-
Mulder, Jelmer (author)In the Netherlands roughly 20.000 people wear an ocular prosthetic as a consequence of losing their eye due to an accident or disease. An ocular prosthetic is a type of facial prosthesis that replaces an absent natural eye. The main goal of an ocular prosthetic is to provide an aesthetic replacement of a real eye. It does not restore the ability...master thesis 2022
- document
-
Romano, Caterina (author)This research project is a collaboration between TUDelft, UPPS Fieldlab, and Made4eyes, a company that produces made-to-fit eyewear.<br/>In order to design a frame correctly, it is essential having a 3D head scan upon which the frame can be molded. The temple tips are crucial components that contribute to the frame's comfort and stability....master thesis 2022
- document
-
Vloemans, Siward (author)The aim of this research is to increase the speed of cyclists by reducing aerodynamic drag. Common research methods are digital and physical simulations. The goal is this project is to develop an anthropometric model for each method based on professional cyclists from Team DSM.<br/><br/>Digital Model (Generic)<br/>The first goal of this research...master thesis 2022
- document
-
Keijser, Lies (author)Your hands are the most precious tools in daily life. Therefore, it is easy to imagine that people with diminished hand functionality experience a reduced quality of life. This implies for patients with joint problems. Consequently, the hand functionality should be increased through splinting. Splinting is a non-operative treatment for patients...master thesis 2022
- document
-
Tissen, L.N.M. (author)3D printing’s rapid technological development is starting to impact the art field because, for the first time, it has become possible to exactly reproduce and reconstruct artworks without any loss of their physical features. Yet, a coherent overview of how 3D printing is used within the art field while paying attention to ethical considerations...book chapter 2022
- document
-
Minnoye, A.L.M. (author), Tajdari, F. (author), Doubrovski, E.L. (author), Wu, J. (author), Kwa, F.S.S. (author), Elkhuizen, W.S. (author), Huysmans, T. (author), Song, Y. (author)Personalized designs bring added value to the products and the users. Meanwhile, they also pose challenges to the product design process as each product differs. In this paper, with the focus on personalized fit, we present an overview as well as details of the personalized design process based on design practice. The general workflow of...conference paper 2022
- document
-
Gupta, Yaman (author)The 3D Head-scanner is designed with the intent to scan a customer’s head such that the client can design personalized glasses using the generated mesh. The uniqueness of this process is due to the fact that the customers are uniquely disabled and therefore unable to clearly announce their comfort levels. The goal of this project is to design a...master thesis 2021
- document
-
Yang, Y. (author), Xu, J. (author), Elkhuizen, W.S. (author), Song, Y. (author)Acquiring an accurate 3D scan of the human hand is a challenging task, mainly due to the complicated geometry and the instability of the hand. In this paper, we present a low-cost photogrammetry-based scanner that is designed for scanning the human hand. The scanner has fifty modules, each has a Raspberry Pi with an 8-megapixels camera. They...journal article 2021
- document
-
Zevenbergen, Alex (author)In 2010, an estimated 15 million infants were born prematurely, which makes up 10% of all childbirths that year. Just in the Netherlands there were 11,530 preterm births in 2018. Since these children should be spending additional months inside of the uterus, they are delicate and need to grow until near regular gestational age inside of an...master thesis 2020
- document
-
van Gaalen, Melissa (author)Introduction<br/>Transparent facial pressure masks with silicone sheeting are used as a non-invasive treatment option for hypertrophic scarring following oncological facial reconstruction. These masks are fabricated using conventional plaster moulds, which is labour-intensive and requires an experienced orthotist or prosthetist. 3D scanning and...master thesis 2020
- document
-
Kotteman, Geerte (author)Additive manufacturing (AM), or 3D printing, is emerging as a technology for different applications made of steel. It is expected that in the coming years the construction industry will benefit from the free and lightweight forms that can be fabricated and the possible material savings. A few experimental results of 3D printed stainless steel...master thesis 2020