- document
-
Carrillo Córcoles, X. (author), Sodja, J. (author), De Breuker, R. (author)The ram air inlets flaps are used in some aircraft to modulate the amount of ram<br/>air cooling the Environmental Control System. The current flap design features two metallic plates connected with a hinge. The present work studies an alternative design that replaces the metallic plates with a single composite laminate with morphing...conference paper 2023
- document
-
Brunner, A.E. (author), Alderliesten, R.C. (author), Pascoe, J.A. (author)Quasi-static or cyclic loading of an artificial starter crack in unidirectionally fibre-reinforced composite test coupons yields fracture mechanics data—the toughness or strain-energy release rate (labelled G)—for characterising delamination initiation and propagation. Thus far, the reproducibility of these tests is typically between 10 and...journal article 2023
- document
-
Volakos, Efstratios (author), Davis, Chris (author), Teich, Martien (author), Lenk, Peter (author), Overend, M. (author)Embedded load-bearing laminated glass connections have gained popularity in recent years due to their mechanical performance and aesthetic appeal. However, there is a paucity of data on their structural behaviour across a range of temperatures that may arise in building applications and there is also no simplified mechanics-based model for...journal article 2023
- document
-
Ferreira Motta, Roberto (author), Alderliesten, R.C. (author), Zarouchas, D. (author), Yutaka Shiino, Marcos (author), Odila Hilario Cioffi, Maria (author), Jacobus Cornelis Voorwald, Herman (author)After half a century of developing fatigue delamination prediction models, where accuracy seems more important than physical understanding, this research aims to merge both aspects. To that aim, strain energy release (SER) within the fatigue load cycle was studied using acoustic emission. The correlation between the measured strain energy...journal article 2023
- document
-
Angelides, S. C. (author), Talbot, J. P. (author), Overend, M. (author)The applications of architectural and automotive laminated glass continue to grow. This is largely due to the enhanced safety in extreme events, such as blast. However, the complex interaction between the glass fragments and the polymer interlayer after glass fracture is still only partially understood, with existing analysis methods adopting...journal article 2023
- document
-
Li, X. (author), Benedictus, R. (author), Zarouchas, D. (author)The present work aims at understanding the stochastic matrix crack evolution in CFRP cross-ply laminates under tension–tension fatigue loading. An experimental campaign was carried out on twenty-three specimens at different stress levels, while two optical techniques were used for the in-situ monitoring of the accumulation of transverse...journal article 2023
- document
-
Takali, Farid (author), Nirwal, Sonal (author), Othmani, Cherif (author), Groves, R.M. (author)It has been shown that the roots of guided waves in laminate plates produced by the ordinary differential equations (ODE) approach may not hold under to some computational conditions. A particular drawback of the 2D formulation of the ODE approach is the lack of reliability in the case of unidirectional laminates due to the decoupling...journal article 2023
- document
-
Moazzami, Mostafa (author), Ayatollahi, M. R. (author), Akhavan-Safar, Alireza (author), Teixeira De Freitas, S. (author), da Silva, Lucas F.M. (author)When a composite laminate is subjected to humidity, moisture diffusion occurs depending on the number and thickness of the lamina. Water diffusion changes the mechanical response of laminates and usually causes a significant reduction of the mechanical properties of the composite specimens in ocean structures. One of the most important...journal article 2023
- document
-
Liu, S. (author), Sinke, J. (author), Dransfeld, C.A. (author)The bias-extension test is one of the test methods to characterise the intra-ply shear behaviour of continuous fibre reinforced composites including fabrics and unidirectional (UD) materials. For the determination of the major mechanical properties of metals, often a uniaxial tensile test is used. Combination of these two methods for the...journal article 2023
- document
-
Mouri Sardar Abadi, P. (author), Baluch, Abrar H. (author), Sebaey, T. A. (author), Peeters, D.M.J. (author), Barzegar, M. (author), Lopes, C. S. (author)This work aims to improve the flexural behaviour of unidirectional fibre-reinforced laminates by means of coupling an optimization procedure for quasi-isotropic configurations with the design space opened by dispersed-ply orientations. The design approach consists of finding suitable alternatives to traditional laminates (with fibre...journal article 2023
- document
-
Hofman, P. (author), van der Meer, F.P. (author), Sluys, Lambertus J. (author)In this work, a recently proposed high-cycle fatigue cohesive zone model, which covers crack initiation and propagation with limited input parameters, is embedded in a robust and efficient numerical framework for simulating progressive failure in composite laminates under fatigue loading. The fatigue cohesive zone model is enhanced with an...journal article 2023
- document
-
Bedon, Chiara (author), Louter, P.C. (author)Purpose: Glass material is largely used for load-bearing components in buildings. For this reason, standardized calculation methods can be used in support of safe structural design in common loading and boundary conditions. Differing from earlier literature efforts, the present study elaborates on the load-bearing capacity, failure time and...journal article 2023
- document
-
Yao, Liaojun (author), Chuai, Mingyue (author), Liu, J. (author), Guo, Licheng (author), Chen, Xiangming (author), Alderliesten, R.C. (author), Beyens, M. (author)This study provides an investigation on mode I fatigue delamination growth (FDG) with fibre bridging at different R-ratios and temperatures in carbon-fibre reinforced polymer composites. FDG experiments were first conducted at different temperatures of R-ratios 0.1 and 0.5 via unidirectional double cantilever beam (DCB) specimens. A fatigue...journal article 2023
- document
-
Grul, Wesley (author)The Netherlands has faced rapidly increasing housing prices over the previous years. As a counter measure, the government is aiming to increase the construction of new houses from around 70 thousand annually to 100 thousand annually, to achieve 900 thousand new houses by 2030. At the same time the world is facing a climate crisis and the...master thesis 2022
- document
-
Bruinenberg, Ingmar (author)Composite structures are used more frequently in newly designed aircrafts. This results in new difficulties compared to conventional metals during operational life. Especially, the material properties of two different materials can cause side effects, which are unwanted in a structure, for example thermal stresses. Many reports have been written...master thesis 2022
- document
-
Bos, Isa (author)Low-frequency sound transmission in a cross-laminated timber apartment building can result in annoyance, even if the acoustic requirements of the building code are fulfilled. Cross-laminated timber is an upcoming material in the building industry. But there are also problems arising when building with this relatively new material. CLT is a...master thesis 2022
- document
-
Nilsen, Lars (author)Morphogenesis of living organisms could be used as inspiration to digitally augment the reinforcement of structures. The design space in terms of fiber orientation was enlarged to facilitate more complex patches with improved performance that can be 3D printed using a ghost ply optimisation. Simulations performed on optimized open-hole tensile...master thesis 2022
- document
-
Wang, Jue (author), Yuan, Weiyi (author), Li, Z. (author), Zhu, Yingcan (author), Santos, Thebano (author), Fan, J. (author)This paper presents a convenient and efficient method to predict the mechanical solutions of a laminated Liquid Crystal Elastomers (LCEs) system subjected to combined thermo-mechanical load, based on a back propagation (BP) neural network which is trained by machine learning from a database established by analytical solutions. Firstly, the...journal article 2022
- document
-
Veenstra, C.R.A. (author), Noteboom, C. (author), Oikonomopoulou, F. (author), Overend, M. (author)This research revolves around the design, fabrication and testing of tubular glass columns, with particular focus on their redundancy and fire-safety mechanisms; moreover, addressing aspects such as: the column shape; cleaning and maintenance; end connections; geometric tolerances in the glass and demountability. Two alternative circular hollow ...conference paper 2022
- document
-
Möckel, Maximilian (author), Lohr, Katharina (author), Louter, P.C. (author)All-glass structures have become increasingly popular with architects and builders in recent years. Glass surfaces are becoming larger and more impressive, while connections are being decreased to obtain maximum transparency. The supporting structure of glass facades, glass roofs or walk-on glazing is mostly made of metal. One of the reasons for...conference paper 2022