Searched for: subject%3A%22Blending%22
(1 - 20 of 86)

Pages

document
Chen, B. (author), Ye, G. (author)
This research explored the microstructure formation and strength development of blended cement pastes prepared with municipal solid waste incineration (MSWI) bottom ash. A new sample preparation approach involving water treatment of MSWI bottom ash was developed to prevent sample cracking caused by the presence of metallic aluminum (Al) in...
journal article 2024
document
Qin, Guojin (author), Li, Ruiling (author), Yang, M. (author), Wang, Bohong (author), Ni, Pingan (author), Wang, Yihuan (author)
The estimation of failure probability is challenging in hydrogen embrittlement in steel pipelines due to the complexity of the synergistic effect of multiple factors. The present study proposed a hybrid methodology to estimate the failure probability of steel pipelines due to hydrogen embrittlement. The methodology integrates the fault tree...
journal article 2024
document
Chen, B. (author)
In recent years, considerable attention has been given to the utilization of municipal solid waste incineration (MSWI) bottom ash as a mineral resource for construction materials. MSWI bottom ash is the primary residue discharged after incinerating municipal solid waste. The generation of MSWI bottom ash is increasing dramatically with the wide...
doctoral thesis 2023
document
Imhoff, Ruben O. (author), De Cruz, Lesley (author), Dewettinck, Wout (author), Brauer, Claudia C. (author), Uijlenhoet, R. (author), van Heeringen, Klaas Jan (author), Velasco-Forero, Carlos (author), Nerini, Daniele (author), Van Ginderachter, Michiel (author), Weerts, Albrecht H. (author)
Flash flood early warning requires accurate rainfall forecasts with a high spatial and temporal resolution. As the first few hours ahead are already not sufficiently well captured by the rainfall forecasts of numerical weather prediction (NWP) models, radar rainfall nowcasting can provide an alternative. Because this observation-based method...
journal article 2023
document
Chen, Sian Ying (author), van de Waerdt, W.A. (author), Castro, Saullo G.P. (author)
The Flying-V aircraft concept promises better fuel-burn performance over conventional tube-and-wing configurations, integrating the passenger cabin and cargo volume into the lifting surface. However, the wing-fuselage and cockpit windows of the Flying-V are exposed to the flight direction, posing a new challenge to the design and...
journal article 2023
document
Wang, Sheng (author), Huang, Weidong (author), Liu, X. (author), Lin, P. (author)
The goal of this study was to investigate the effect of styrene-butadiene-styrene (SBS) polymer on the aging properties of high-content terminal blend rubber modified asphalt (HCTBMA). All asphalt was tested for chemo-rheological properties using an attenuated total reflection-Fourier transform infrared spectroscopy (ATR-FTIR) test,...
journal article 2023
document
Meng, Yuanyuan (author), Ye, Xiangqian (author), He, Fuqiong (author), Chen, Zhipeng (author), Hu, Chichun (author), Lin, P. (author)
Terminal blended rubberized asphalt binder (TB) technology, which blends crumb tire rubber (CR) with asphalt under high interaction conditions, offers a promising waste tire recycling solution for pavement construction. By precisely controlling the degradation progress of CR, it is possible to prepare TB with specific property requirements....
journal article 2023
document
Versteijlen, Marieke (author), Wals, Arjen E.J. (author), van Wee, G.P. (author)
Introduction: Blended learning, i.e., a mix of online and in-class education, can be deployed for enhancing the educational quality and resilience in higher education (HE). It may also contribute to HE’s sustainability objectives by lowering the carbon emissions of students commuting to campus. In this study, pedagogical design principles for...
journal article 2023
document
Moreno Fernandez-Villamil, F.J. (author), Karpov, I. (author), Ahmed, A.H.S. (author), Foglia, J.M. (author), Wu, H. (author), Gadekar, A. (author), Swinkels, P.L.J. (author), Gani, R. (author)
The use of refrigerants has been continuously increasing in thermal control systems employed in residential premises, offices, storage, process operations and many more. Widely used refrigerants such as R-410A have become a target for regulations to prohibit their use because of environmental issues. R-410A is a blend of R-32 (Difluoromethane...
book chapter 2023
document
Ansah, Alberta A. (author), Vivacqua, Adriana S. (author), Zhong, Sailin (author), Boll, Susanne (author), Constantinides, Marios (author), Verma, H. (author), El Ali, Abdallah (author), Lushnikova, Alina (author), Alavi, Hamed (author)
The COVID-19 pandemic led to a sudden shift to virtual work and events, with the last two years enabling an appropriated and rather simulated togetherness - the hybrid mode. As we return to in-person events, it is important to reflect on not only what we learned about technologies and social justice, but about the types of events we desire,...
conference paper 2023
document
Peeten, Vino (author)
The offshore wind market is growing rapidly, and new offshore wind projects are being launched more than ever. To keep up with demand, parts for these wind turbines are being produced all over the world. To get all the parts needed to their destination on time, they must be transported on heavy transport vessels (HTVs).<br/><br/>Today, business...
master thesis 2022
document
Slootweg, Alexander (author)
For most countries, the targets set in the sustainable development goals for 2030 are far from being met. The main cause is a lack of financing, due to the relatively high risks and low rewards associated with sustainable projects. This has caused a financing gap in developing countries of upwards of 2.5 trillion US$ annually, equal to 3% of...
master thesis 2022
document
Wang, Sheng (author), Huang, Weidong (author), Liu, X. (author), Lin, P. (author)
The influence of sulfur on the chemical, rheological, and aging resistance of terminal blend rubberized bitumen (TBRB) was studied. TB hybrid bitumen (TBHB) was prepared from with different sulfur contents (0.1, 0.2, 0.3, 0.4 wt%) and TBRB prepared with neat bitumen and crumb rubbers at 20% content. TBHB binders were aged by rolling thin film...
journal article 2022
document
Kalmar, E. (author), Aarts, Tom (author), Bosman, Esther (author), Ford, Camera (author), de Kluijver, Lisa (author), Beets, Josine (author), Veldkamp, Lisette (author), Timmers, Pauline (author), Besseling, Diede (author), Koopman, Joris (author), Fan, Chuntzu (author), Berrevoets, Enya (author), Trotsenburg, Melissa (author), Maton, Loes (author), van Remundt, Jill (author), Sari, Ela (author), Omar, Lee Wen (author), Beinema, Emiel (author), Winkel, R.N.W. (author), van der Sanden, M.C.A. (author)
Collaborative learning is a teaching method that brings together students to discuss a topic important for a given course or curriculum and solve a related problem or create a product. By doing this, learners create knowledge together and gain 21<sup>st</sup> –century skills such as communication, critical thinking, decision making,...
journal article 2022
document
Zhao, Liang (author), Ao, Yibin (author), Wang, Yan (author), Wang, T. (author)
As coronavirus disease 2019 (COVID-19) swept the world in early 2020, all the Chinese universities and colleges adopted online learning to fulfill the directive saying “classes suspended but learning continues.” Understanding the impact of this large-scale online learning experience on the future online learning intention of Chinese university...
journal article 2022
document
Wang, S. (author), Huang, Weidong (author), Liu, X. (author), Lin, P. (author)
The chemical and rheological properties of terminal blend hybrid asphalt (TBHA) contributing to the consumption of waste tires before and after aging were studied. Styrene-butadiene-styrene (SBS) polymer, sulphur, crumb rubber (CR), and neat asphalt were chosen to prepare the TBHA. The short-term aging (STA) and long-term aging (LTA) of TBHA...
journal article 2022
document
van Campen, J.M.J.F. (author)
Significant improvements in the mechanical performance of a laminated composite structure can be achieved by spatial variation of the stiffness properties within the laminate. Such a variable stiffness (VS) laminate, typically is created by steering the fibers within the laminae, resulting in an in-plane variation of stacking sequence and thus...
conference paper 2022
document
Simons, L.P.A. (author), Pijl, Hanno (author), Verhoef, John (author), Lamb, Hildo J. (author), van Ommen, Ben (author), Gerritsen, B. (author), Bizino, Maurice B. (author), Snel, Marieke (author), Feenstra, R.W. (author), Jonker, C.M. (author)
Hybrid e-health support was given to 11 insulin-dependent type 2 diabetes mellitus (DM2) patients, with electronic support plus a multi-disciplinary health support team. Challenges were low ICT and health literacy. After 50 weeks, attractiveness and feasibility of the intervention were perceived as high: recommendation 9.5 out of 10 and...
journal article 2022
document
Claassen, Judith (author)
Torrential rain from tropical cyclones can have a devastating impact, causing loss of life and billions in damages. To better understand the risk faced by coastal communities, it is important to estimate how often a tropical cyclone could occur and how much rainfall it will produce. One way to do this is by analyzing past storms and building...
master thesis 2021
document
Roepman, Thore (author)
Straight fiber variable stiffness laminates use multiple overlapping patches to tailor the fiber orientations in particular regions of the laminate. A novel, automated framework for the design of manufacturable laminate has been developed using different stages. In the first and second stage an optimal stiffness distribution is determined using...
master thesis 2021
Searched for: subject%3A%22Blending%22
(1 - 20 of 86)

Pages