Searched for: subject%3A%22Cables%22
(1 - 20 of 169)

Pages

document
Thumann, V.M. (author)
The study of the hydrodynamic interaction of cables has become more important in recent years since umbilical cables of more than 3000 meters length have been used when photographing the wreck of the HMS Titanic or the Bismarck. Cable vibration can cause distorting of the digital signals being transmitted as well as premature fatigue failure of...
master thesis 1991
document
Bartelink, R.J.J. (author)
After a short introduction about the importance of cable distribution, the HDMAC signal format is explained. The signal processing blocks at studio, transmission and receiver are presented to see what the effect is on noise, reflections and group delay.
master thesis 1991
document
Stoter, J. (author), H. Ploeger, H. (author)
conference paper 2003
document
Podgaets, A.R. (author), Ockels, W.J. (author)
One of novel concepts to use the energy of high altitude winds is by launching a series of kite on a long rope and let them pull the rope thus driving the generator. A mathematical model of tethered kites system has been developed consisting of models of kites and of the cable that links them together and to the generator on the ground energy...
conference paper 2006
document
Jongen, R.A. (author), Morshuis, P.H.F. (author), Gulski, E. (author), Smit, J.J. (author), Maksymiuk, J. (author), Janssen, A.L.J. (author)
journal article 2006
document
Bodega, R. (author)
One of the intrinsic properties of the polymeric high voltage (HV) direct current (DC) cable insulation is the accumulation of electrostatic charges. Accumulated charges distort the initial Laplacian distribution of the electric field, leading to a local field enhancement that may cause insulation degradation and premature breakdown of the...
doctoral thesis 2006
document
Breukels, J. (author), Ockels, W.J. (author)
For the purpose of ultimately building a fully dynamic simulation of kites, an investigation is launched into a viable model of the cable with which the kite is attached to the ground. In the model proposed in this paper, only the slow modes of motion are taken into account due to the fact that only the slow motions have a real effect on the...
conference paper 2007
document
Giezen, C. (author)
MET ALS BIJLAGE: AO poster. For an existing facade structure of the faculty of architecture a new concept is designed. It involves a curtain wall with a loadbearing welded glass construction as a posterior construction. The total construction is built out of starshaped elements, these elements are demountable because of the designed joint. The...
master thesis 2008
document
Giezen, C. (author)
For an existing facade structure of the faculty of architecture a new concept is designed. It involves a curtain wall with a loadbearing welded glass construction as a posterior construction. The total construction is built out of starshaped elements, these elements are demountable because of the designed joint. The joint is based on the torque...
master thesis 2008
document
Schiele, A. (author)
This thesis is the first to provide the fundamentals of ergonomic exoskeleton design. The fundamental theory as well as technology necessary to analyze and develop ergonomic wearable robots interacting with humans is established and validated by experiments and prototypes. The fundamentals are (1) a new theoretical framework for analyzing...
doctoral thesis 2008
document
Steenstra, H.T. (author)
The thesis deals with the behaviour, with respect to EMC (Electro Magnetic Compatibility), of cabling and wiring in buildings and installations. Measurement and calculation methods are developed and applied to cabling in a large scale installation as well as to individual cables. Besides, the location and interconnection of conductors,...
doctoral thesis 2008
document
Steenstra, H.T. (author), Van Deursen, A.P.J. (author)
Switched-mode power supplies in variable-frequency drives often combine good electrical efficiency with generous production of conducted emission. The common-mode (CM) current through the output-to-motor cablemay perturb nearby systems via cable-to-cable crosstalk. Parameters relevant for the coupling are the rise–fall times and amplitude of the...
journal article 2008
document
Gulski, E. (author), Cichecki, P. (author), Wester, F. (author), Smit, J.J. (author), Bodega, R. (author), Hermans, T.J.W.H. (author), Seitz, P.P. (author), Quak, B. (author), De Vries, F. (author)
In addition to after-laying of new-installed high voltage (HV) power cables the use of on-site non-destructive on-site testing and diagnosis of service aged power cables is becoming an important issue to determine the actual condition of the cable systems and to determine the future performances. In this paper based on field experience an...
journal article 2008
document
Cichecki, P. (author), Jongen, R.A. (author), Gulski, E. (author), Smit, J.J. (author), Quak, B. (author), Petzold, F. (author), De Vries, F. (author)
journal article 2008
document
Sinambela, E.J. (author)
PD diagnostic using Oscillating Wave Test System (OWTS) is very powerful measurement and very sensitive measurement. Many parameters can influence the quality of the measurement and several problems can occur during performing PD measurement. In this study, several parameters which can influence the quality of the measurement and problems...
master thesis 2009
document
Lennon, B. (author)
This thesis is an in-depth research on information concerning High Voltage Direct Current (HVDC) power transmission. The far reaching effects from faults arising in HVDC cable systems are noteworthy and from this perspective a broad literature review is dedicated to insulation monitoring techniques. The analysis is further subcategorised into on...
master thesis 2009
document
Gockel, P.N.M. (author)
In the current society, energy is getting more and more important and one of the most important energy carriers is electricity. TenneT TSO b.v, being the Dutch Transmission System Operator and the administrator of the national transmission grid is responsible not only for the continuity of the electricity supply, but also for the reliability and...
master thesis 2009
document
Krook, J. (author), Eklund, M. (author), Carlsson, A. (author), Frändegård, P. (author), Svensson, N. (author)
In theory, ‘urban mining’ has a huge potential for enabling more efficient resource use and offering new business opportunities for the cleantech and recycling industries. This concept involves recovering technospheric stocks of previously employed natural resources that have been taken out of use without being collected for waste management....
conference paper 2010
document
Mehairjan, R.P.Y. (author)
The greater pressure from both customers and regulators to maintain and enhance service reliability, while at the same time controlling costs, has caused many utility distribution businesses to adopt Asset Management (AM) as their framework. Therefore, AM is widely being applied in asset intensive industries around the world. Generally, AM...
master thesis 2010
document
Alons, P. (author)
Urban strategy for the transformation of Schieoevers North area in Delft. Taking into account the preservation of the industrial heritage and the new development of the Spoorzone Delft. This urban strategy is used for the transformation of an old cable factory in to new vibrant living and working environment.
master thesis 2011
Searched for: subject%3A%22Cables%22
(1 - 20 of 169)

Pages