- document
-
Zhang, A. (author)Bio-mediated methods, such as microbially induced carbonate precipitation (MICP) and enzyme induced carbonate precipitation (EICP), have gained considerable attention as alternatives to invasive ground improvement techniques. MICP and EICP use biogeochemical processes to drive carbonate precipitation and bind soil grains, thereby improving the...doctoral thesis 2024
- document
-
Chen, B. (author), Ye, G. (author)This research explored the microstructure formation and strength development of blended cement pastes prepared with municipal solid waste incineration (MSWI) bottom ash. A new sample preparation approach involving water treatment of MSWI bottom ash was developed to prevent sample cracking caused by the presence of metallic aluminum (Al) in...journal article 2024
- document
-
Klemczak, Barbara (author), Gołaszewski, Jacek (author), Cygan, Grzegorz (author), Gołaszewska, Małgorzata (author), Jonkers, H.M. (author), Zhilyaev, D. (author), Koenders, Eduardus A.B. (author)Given the rising popularity of foam concrete (FC) for both structural and insulating purposes, evaluating the feasibility of recycling after its lifespan is crucial in the context of the growing emphasis on sustainable building practices. One approach to recycling FC incorporating microencapsulated phase change material (MPCM) involves...journal article 2024
- document
-
Shiotani, T. (author), Ogura, N. (author), Okude, N. (author), Watabe, K. (author), Van Steen, C. (author), Tsangouri, E. (author), Lacidogna, G. (author), Czarnecki, S. (author), Chai, H. K. (author), Yang, Y. (author), Verstrynge, E. (author), Aggelis, D. G. (author)Aging infrastructure globally faces degradation, posing risks and requiring substantial repair investment. Strategic maintenance practices are crucial for evaluating structural conditions and ensuring sustainability. The growing demands on modern materials and structures necessitate enhanced health monitoring approaches. Shifting from...journal article 2024
- document
-
Chen, B. (author)In recent years, considerable attention has been given to the utilization of municipal solid waste incineration (MSWI) bottom ash as a mineral resource for construction materials. MSWI bottom ash is the primary residue discharged after incinerating municipal solid waste. The generation of MSWI bottom ash is increasing dramatically with the wide...doctoral thesis 2023
- document
-
Nedelchev, Hari (author)Recycled aggregate concrete is emphasized more and more nowadays due to its importance towards the construction industry and general welfare of our planet. Being such a significant feature with regard to universal sustainable development, every aspect of its properties should be evaluated, examined and optimized so that there is a well-known,...master thesis 2023
- document
-
Raghavan, Arjun (author)In this research, the effect of curing with different types of current, current densities/voltage intensity on mortar is studied. The main objective is to explore the outcomes of electric curing on the setting time of CEM-I mortar. For achieving the main objective, an electrical curing setup is designed to accommodate curing with direct current,...master thesis 2023
- document
-
Groenewegen, Jessica (author)Distal cement plug removal in total hip arthroplasty revision is a time-consuming and technically challenging procedure. There is a risk of perforating the femur while drilling in the cement plug. This risk increases when the orientation of the prosthesis tip is excentric. The aim of this study was to design a reusable drill guide that...master thesis 2023
- document
-
de Vilder, Laurens (author)Experimental research into the spalling behaviour of mortars and if it is possible to predict the spalling resistance. Research is divided into spalling experiments with varying parameters and experiments to analyse and characterize the pore structure. By combining both results, a first step is taken into a formula that is able to predict the...master thesis 2023
- document
-
Allahyari, P. (author), Silani, M. (author), Yaghoubi Nasrabadi, V. (author), Milovanovic, P. (author), Schmidt, F. N. (author), Busse, B. (author), Qwamizadeh, M. (author)Bone encompasses a complex arrangement of materials at different length scales, which endows it with a range of mechanical, chemical, and biological capabilities. Changes in the microstructure and characteristics of the material, as well as the accumulation of microcracks, affect the bone fracture properties. In this study, two-dimensional...journal article 2023
- document
-
Lv, Leyang (author), Luo, Shitao (author), Šavija, B. (author), Zhang, Hongzhi (author), Li, Lin (author), Ueda, Tamon (author), Xing, Feng (author)The particle size distribution (PSD) has a significant influence on the fresh and final properties of cement and its derived products. In this paper, CSA cements with three different mean diameters (D<sub>50</sub>), ranging from 6.04 to 26.62 μm were prepared by milling. The pre-hydration behavior was quantitatively analyzed, including the...journal article 2023
- document
-
Zhang, A. (author), Dieudonné, A.A.M. (author)Microbially induced carbonate precipitation is a promising ground improvement technique which can enhance the mechanical properties of soils through the precipitation of calcium carbonate. Experimental evidences indicate that the precipitated carbonate can display different distribution patterns. Crystals can develop at grain–grain contacts ...journal article 2023
- document
-
Chen, Y. (author), Zhang, Y. (author), He, S. (author), Liang, X. (author), Schlangen, E. (author), Copuroglu, Oguzhan (author)In 3D concrete printing, fast structuration is a prerequisite for ideal buildability. This paper aims to study the impact of inorganic additives, i.e., CaCl<sub>2</sub> and gypsum, on structural build-up and very early-age hydration of limestone-calcined clay-cement (LC3) pastes within the first 70–80 min. Results show that, increasing the...journal article 2023
- document
-
Lu, T. (author), Liang, X. (author), Liu, C. (author), Chen, Y. (author), Li, Z. (author)This study experimentally investigated the effects of surfactants and water-repelling agents on the hydration process, relative humidity, and mechanical properties of Portland cement pastes. Based on the measurement results, the degree of hydration, degree of saturation, capillary tension of autogenous shrinkage, and magnitude of autogenous...journal article 2023
- document
-
Liang, M. (author), Zhang, Y. (author), He, S. (author), Chen, Y. (author), Schlangen, E. (author), Šavija, B. (author)This study investigated the evolution process of high-volume slag cement (HVSC) paste from a chemo-mechanical standpoint. HVSC specimens with a 70 w.t. % slag replacement rate were studied at various ages. Evolution of phase assemblage, microstructure development, and micromechanical properties were analyzed using TGA/XRD/MIP/SEM-EDS and nano...journal article 2023
- document
-
Zhang, Y. (author), Copuroglu, Oguzhan (author)To understand the influence of slag chemistry on the carbonation resistance of slag-rich cement, this paper explored the carbonation characteristics of blended cement systems with different Al<sub>2</sub>O<sub>3</sub> contents in slag through accelerated carbonation test. Irrespective of slag chemistry, three main CO<sub>2</sub> binding...journal article 2023
- document
-
Xu, Yaowen (author), Liang, X. (author), Wan, Chaojun (author), Yang, Hongyu (author), Feng, Xiaming (author)This paper develops a kind of molded disc samples to investigate the carbonation and related behaviors of hardened cement pastes under different previous hydration degrees. Weight and length changes of cement pastes over time are monitored during a multistep process including carbonation, drying, rewetting, and redrying. The combination of X...journal article 2023
- document
-
Chen, Y. (author), Liang, M. (author), Zhang, Y. (author), Li, Z. (author), Šavija, B. (author), Schlangen, E. (author), Copuroglu, Oguzhan (author)Autogenous shrinkage may be a critical issue concerning the use of limestone-calcined clay-cement (LC3) in high-performance concrete and 3D printable cementitious materials, which have relatively low water to binder (W/B) ratio. Adding an internal curing agent, i.e., superabsorbent polymer (SAP), could be a viable solution in this context....journal article 2023
- document
-
Chen, Y. (author), Zhang, Y. (author), He, S. (author), Liang, M. (author), Zhang, Yamei (author), Schlangen, E. (author), Copuroglu, Oguzhan (author)Limestone-calcined clay-cement (LC3), as one of the most promising sustainable cements, has been under development over the past decade. However, many uncertainties remain regarding its rheological behaviors, such as the metakaolin content of calcined clay. This study aims to investigate the effect of increasing the content of fine-grained...journal article 2023
- document
-
Zuo, Yibing (author), Liao, Yishun (author), Ye, G. (author)Thermodynamic parameters of chloride and sulfate intercalated hydrotalcites were deduced. The phase evolutions in alkali‑activated slag cement upon only sodium chloride or only magnesium sulfate attack and combined attack of those two salts were investigated via thermodynamic modelling. Friedel's salt was predicted to form under sodium...journal article 2023