Searched for: subject%3A%22Coatings%22
(1 - 20 of 264)

Pages

document
Prins, Jelle (author)
Sulfide-based solid-state batteries (SSBs) are emerging as a top contender for next-generation rechargeable batteries with improved safety and outstanding energy densities. SSBs incorporate non-flammable solid-electrolytes (SEs), eliminating safety hazards for batteries in electric vehicles and electronic devices. In addition, the development of...
master thesis 2024
document
Ding, Z. (author)
Thermal barrier coatings (TBCs) are applied on the surface of metallic components of<br/>modern jet engines such as combustion chambers, blades and vanes, in order to increase the<br/>engine efficiency by allowing higher operating temperatures. However, during cooling from<br/>the operating temperature (i.e. 1000 °C) to room temperature high...
doctoral thesis 2024
document
Connolly, Ronan (author)
Ice accumulation on aircraft surfaces is a prevalent issue, and icephobic coating strategies can be implemented to assist in the removal of or ice on an aircraft. However little is known regarding the effects of novel icephobic coatings and surfaces on ice adhesion strength, which is difficult to measure and quantify, and is typically reported...
master thesis 2024
document
Li, Z. (author), Visser, Peter (author), Hughes, Anthony E. (author), Homborg, A.M. (author), Gonzalez Garcia, Y. (author), Mol, J.M.C. (author)
The quest for novel alternatives to hexavalent-chromium-based corrosion inhibitors is of utmost significance and urgency. Strict international health and safety regulations, due to growing concerns regarding the impact of hexavalent chromium on human health and the environment, have pushed the commercial introduction of many alternative...
journal article 2024
document
Lin, B. (author), Heijman, Sebastiaan (author), Rietveld, L.C. (author)
Ceramic nanofiltration (NF) is a promising alternative for direct surface water treatment, but is hampered for full-scale applications by fouling and a lack of eco-friendly cleaning regimes. In this work, an innovative reactive pre-coat layer, consisting of an iron oxychloride catalyst, was constructed on top of commercial ceramic NF...
journal article 2024
document
Zamponi, R. (author), Avallone, F. (author), Ragni, D. (author), Schram, C. (author), van der Zwaag, S. (author)
This paper elucidates the link between the near-wake development of a circular cylinder coated with a porous material in a low Mach-number flow and the related aerodynamic sound attenuation. It accomplishes this by formulating the cylinder flow-induced noise as a diffraction problem. The necessity for such an approach is driven by...
journal article 2024
document
Li, Z. (author), Homborg, A.M. (author), Visser, Peter (author), Gonzalez Garcia, Y. (author), Mol, J.M.C. (author)
In this work, the corrosion mechanism of AA2024-T3 covered by a lithium-based conversion layer is studied with high spatial and temporal resolution. Although the aluminium alloy surface is protected by a multi-layered conversion layer, areas around intermetallic phases (IMPs) represent weak spots due to an insufficient generation of a...
journal article 2024
document
Madelat, Negin (author), Wouters, Benny (author), Visser, Peter (author), Jiryaeisharahi, Zahra (author), Marcoen, Kristof (author), Abrahami, S.T. (author), Hubin, Annick (author), Terryn, H.A. (author), Hauffman, Tom (author)
In this work, the correlation between electrolyte transport properties and the variation of pigment volume concentration (PVC) in a series of organic coatings is explored. Using an odd random phase electrochemical impedance spectroscopy (ORP-EIS) approach, the diffusion of ions independent from water take-up is analysed. A higher PVC resulted...
journal article 2024
document
Cornet, A.J. (author), Homborg, A.M. (author), 't Hoen-Velterop, Ludmila (author), Mol, J.M.C. (author)
The substitution of chromate-containing structural coating systems in aviation with alternatives complying with nowadays strict environmental, health and safety regulations remains a formidable challenge. This complexity is partly due to the absence of a standardized from-test-to-market methodology, including a performance comparison between...
journal article 2024
document
Hoebus, Laura (author)
In cold regions, the formation and accumulation of ice can cause safety hazards and impede proper operation of equipment. By example, ice accumulation on aircraft wings can increase drag, increase weight, reduce upward force and decrease aircraft speed. <br/><br/>For these reasons, proper anti- or de-icing techniques need to be developed. These...
master thesis 2023
document
Winters, Koen (author)
The exposure of certain carbon steels to sour environments can result in severe hydrogen induced cracking (HIC) damage in the oil and gas industry. Current mitigation techniques in this field have low reliability or are not able to provide long-term protection against such damage. Recent advancements in thermal spray technology have resulted in...
master thesis 2023
document
Ganesan, Shruthi (author)
The urgent need to decrease greenhouse gas emissions and enable clean energy transition has driven the power industry to seek compact and eco-friendly solutions for power transmission. Gas Insulated Switchgear has been a key technology in this regard, using Sulphur Hexafluoride gas as an insulating medium. However, is a potent greenhouse gas...
master thesis 2023
document
IOANNIDIS, MENANDROS (author)
Current research conducted at TU Delft focused on utilizing structural Topology Optimization (TO) for designing large monolithic cast glass structures with maximum stiffness and minimum mass. These structures demonstrated improved manufacturability in terms of time, energy, and cost efficiency due to their mass efficiency, which results in...
master thesis 2023
document
Wanjari, Pratyush (author)
This research aimed to enhance and quantify the wettability and water affinity of Expancel microparticles which generally demonstrates a lack of affinity with water. To enhance their water affinity, hydrophilic coatings like SiO2 and TiO2 were deposited onto the microparticles using atomic layer deposition (ALD). Various experimental techniques...
master thesis 2023
document
Rice, Samantha (author)
Numerous advancements have been made in transparent electrode technologies that can complement optogenetics and imaging modalities. However, several obstacles restrict the design and material of electrode devices, including the required flexibility, transparency, low impedance, high charge storage<br/>capacity (CSC), and high charge injection...
master thesis 2023
document
Magri, Etienne (author), Buhagiar, Vincent (author), Overend, M. (author)
The design trend of most commercial and office buildings over the past three decades focused on attaining a façade design with the highest possible window to wall ratio. Whereas this approach appears to satisfy the aesthetic scope of developing buildings that look ‘modern and transparent’ to maximise on real estate value, the demand for...
journal article 2023
document
Ali, A.Z. (author), Jagannathan, Sadhna (author), Bennani, Yasmina-Doekhi (author), van der Hoek, J.P. (author), Spanjers, H. (author)
In this research, photoelectrocatalytic (PEC) based advanced oxidation process (AOP) was studied for the removal of multiple OMPs through an oxidative mechanism. This study investigated the application of a BiVO4 photoanode in simultaneous removal of three selected OMPs: acetaminophen (ACT), benzotriazole (BTA) and propranolol (PRO). This study...
journal article 2023
document
del Olmo, R. (author), López, E. (author), Matykina, E. (author), Tiringer, U. (author), Mol, J.M.C. (author), Mohedano, M. (author), Arrabal, R. (author)
Plasma electrolytic oxidation (PEO) has been targeted as an eco-friendly alternative technology to conventional chromic acid anodizing (CAA) for corrosion protection of aluminium alloys in the aircraft industry. However, conventional PEO technology implies high energy consumption. Flash-PEO coatings (≤10 μm) produced in short treatment times ...
journal article 2023
document
Jahanmard, F. (author), Khodaei, A. (author), Flapper, Jasper (author), Dogan, O. (author), Roohi, K. (author), Taheri, P. (author), Weinans, Harrie (author), Storm, G. (author), Croes, M. (author), Mastrobattista, E. (author), Amin Yavari, S. (author)
Despite being the most widely used biomaterials in orthopedic surgery, metallic implants do not induce new bone growth because they are bioinert. Surface biofunctionalization of implants with immunomodulatory mediators is a recent approach to promote osteogenic factors that facilitate bone regeneration. Liposomes (Lip) can be used as a low-cost,...
journal article 2023
document
Wu, Wentao (author), Chu, Liangyong (author), Garcia, Santiago J. (author), van der Zwaag, S. (author), Li, Ming (author), Shen, Liming (author), Bao, Ningzhong (author)
In this paper, graphene oxide (GO) modified microcapsules have been developed for use in self-healing Cardanol-based epoxy anti-corrosion coatings on steel substrates. The microcapsules had a polymethyl methacrylate (PMMA) shell, covered with aminated GO flakes and contained either of the two complementary healing agents mixed with nanosized...
journal article 2023
Searched for: subject%3A%22Coatings%22
(1 - 20 of 264)

Pages