Testing and modeling of sheet pile reinforced dikes on organic soils: Insights from the Eemdijk full-scale failure test

The Netherlands is inherently challenged by water, as a large part of the country lies below sea level and several major rivers in North-western Europe cross the country. The most prevalent form of protection from coastal and river floods in the Netherlands includes approximately 22,000 km of earthen dikes, of which 3800 km are primary flood...

Ceramic material under ballistic loading: A numerical approach to sphere impact on ceramic armour material

Armour systems for ballistic protection can be made from many materials. One type of material used in armour systems is ceramic. Ceramic materials, such as alumina and silicon carbide, can be beneficial in an armour system because of their high hardness and relatively low weight. The high hardness of the ceramic potentially causes a projectile...

Finite Element Modelling for Earthquake Loads on Dykes

In the last decades, induced earthquakes were caused by the extraction of gas in the Dutch province of Groningen. Both magnitude and frequency of these earthquakes are expected to increase in the following years, causing a threat for the flood defence system. To guarantee the safety against flooding, it is required to take the influence of...

Material model for wood

Wood is highly anisotropic and shows ductile behaviour in compression and brittle behaviour in tension and shear where both failure modes can occur simultaneously. A 3D material model for wood based on the concepts of continuum damage mechanics was developed. A material subroutine containing the developed model was implemented into a standard FE...

Constitutive model for wood based on continuum damage mechanics

Constitutive modelling of hyperelastic rubber-like materials

The simulation of rubber-like material behaviour by means of the finite element method has been described in this study. Proper material models were selected for the numerical description of static hyper-elasticity. The combinations of a continuum damage mechanics concept and a pseudo-elastic concept with Gao's elastic law were used to simulate...

Computational modelling of rubber-like materials under monotonic and cyclic loading

The simulation of rubber-like material behaviour by means of the finite element method has been described in this study. Proper material models for the numerical description of static hyper-elasticity, the ideal Mullins effect and the Mullins effect with permanent deformation were proposed, respectively. The second focus of this study was the...