- document
-
Esposito, R. (author), Hendriks, M.A.N. (author)The alkali-silica reaction (ASR) is a long-term deterioration process, which produces a hydrophilic and expansive gel causing damage. The ASR acts on concrete as an ageing phenomenon, modifying the material on the basis of its stress state. Focussing on the mechanical degradation of concrete, estimated trends for the mechanical properties in...conference paper 2016
- document
-
Eleftheroglou, N. (author), Zarouchas, D. (author), Loutas, T. (author)This study focused on the in-situ fatigue damage assessment of open-hole carbon/epoxy coupons using Acoustic Emission (AE) and Digital Image Correlation (DIC) techniques. Constant amplitude fatigue tests were performed and the main objective was to investigate the damage process, the degradation process of the fatigue modules and to identify...conference paper 2016
- document
-
Giardina, C. (author), Hendriks, M.A.N. (author), Rots, J.G. (author)This paper describes a new framework for the assessment of potential damage caused by tunneling-induced settlement to surface masonry buildings. Finite element models in two and three dimensions, validated through comparison with experimental results and field observations, are used to investigate the main factors governing the structural...journal article 2015
- document
-
Culp, H.J. (author)The research stage of this project is about the development of a toolkit for damage-assessment, to be used by leading people in smaller restoration-projects that lack the skills and knowledge to give proper leadership in the whole process. The subject in this case is salt-related damage in brick-masonry. In the design stage, a future use is...master thesis 2013
- document
-
Kappen, J.M.J. (author), Giardina, G. (author), Hendriks, M.A.N. (author), Rots, J.G. (author)The development of infrastructure in major cities often involves tunnelling, which can cause damage to existing structures. Therefore, these projects require a careful prediction of the risk of settlement induced damage. The simplified approach of current methods cannot account for three-dimensional structural aspects of buildings, which can...conference paper 2013
- document
-
Kappen, J.M.J. (author)Recent tunnelling projects have received a great amount of media attention due to settlement induced damage. Due to the simplified approach of existing risk assessment methods, a new assessment system is in development, which can account for three-dimensional structural aspects of buildings. The aim of this study is to investigate the influence...master thesis 2012
- document
-
Vilaplana Domingo, A.M. (author)Richards Bay Port, located in the East Coast of South Africa, was built during the 1970s. Two rubble mound breakwaters were constructed to protect the deep-water entrance channel and create a sheltered area for the vessels. Since the completion of these breakwaters in 1976, they have withstood several major storms, including cyclones that have...master thesis 2012
- document
-
Ten Veldhuis, J.A.E. (author)This study presents a first attempt to quantify tangible and intangible flood damage according to two different damage metrics: monetary values and number of people affected by flooding. Tangible damage includes material damage to buildings and infrastructure; intangible damage includes damages that are difficult to quantify exactly, such as...journal article 2011
- document
-
Zethof, M. (author)The fresh water supply will be more under pressure, due to the predicted effects of climate change in the Netherlands. More frequent salt water intrusion during the summer semester is caused by the joint occurrence of low river discharges and the expected sea level rise. The control of external salinity is necessary to guarantee a sufficient...master thesis 2011
- document
-
Giardina, G. (author), Hendriks, M.A.N. (author), Rots, J.G. (author)Excavation works in urban areas require a preliminary risk damage assessment. In historical cities, the prediction of building response to settlements is necessary to reduce the risk of damage of the architectural heritage. The current method used to predict the building damage due to ground deformations is the Limiting Tensile Strain Method ...conference paper 2009
- document
-
de Jonge, J.B. (author), Hol, P.A. (author)Fatigue meter data obtained during operational flights of Fokker F27 and Fokker F28 aircraft were re-processed and analyzed to study the variation in load experience between different aircraft of the same type. The Data covered about 470000 flights, made by 101 aircraft of 51 different operators. A simple algorithm was developed to quantify the...report 1996
- document
-
Oldersma, A. (author), Wanhill, R.J.H. (author)Discussions between D-BAA and the NLR have shown that significant variability in fatigue crack growth properties is possible for the industry standard damage tolerant aluminium alloy, 2024-T3 sheet. This is important for two reasons: (1) design assumptions and (2) comparisons of different candidate materials, such as 6013-T6, with 2024-T3....report 1996
- document
-
Wanhill, R.J.H. (author), Leenheer, R. (author), Steijaert, J.P.H.M. (author), Koens, J.F.W. (author)An Egyptian metal vase from the Ptolemaic period was investigated metallurgically and fractographically. The metal is nearly pure silver, and chemical analysis indicates it was obtained from the cupellation of lead. Despite its high purity (in archaeological terms) the metal is severely cracked and embrittled, with fractures mainly along grain...report 1995
- document
-
Wanhill, R.J.H. (author)This paper reviews currently available information on corrosion and fatigue in aircraft as a background to discussing the assessment of corrosion and fatigue damage. The main topics are: - aircraft operating environments and loads - corrosion - fatigue - corrosion and fatigue - corrosion and fatigue damage assessment. Aircraft structures are...report 1995
- document
-
Wanhill, R.J.H. (author)This report reviews currently available information on corrosion and fatigue in aircraft as a background to discussing the assessment of corrosion and fatigue damage. The main topics are: * aircraft operating environments and loads * corrosion * fatigue * corrosion and fatigue * corrosion and fatigue damage assessment. Aircraft structures are...report 1994
- document
-
Labonté, S. (author), Wiggenraad, J.F.M. (author)A preliminary investigation is reported of the development of a Structure Relevant (SR-) specimen, which maintains the essential features of a stiffened panel configuration, in order to study damage growth behavior at limited cost. Several SR-specimens were fabricated, damage was applied, either through impacts or by the insertion of artificial...report 1993
- document
-
de Jonge, J.B. (author), Bartelds, G. (author)The problems of Ageing Aircraft are worldwide. Hence, actions to overcome or prevent these problems should be taken in international collaboration. The Federal Aviation Administration FAA and the Netherlands Civil Aviation Department RLD have signed a Memorandum of Cooperation in the area of structural integrity, with specific reference to...report 1991
- document
-
de Jonge, J.B. (author)Paper presented at the 17th ICAS Congress, Stockholm, September 1990. The actual service load experience of aircraft may differ appreciably from design assumptions. The necessity to monitor service loads is generally recognized now for military aircraft. This paper starts with a general review of the overall life management procedure commonly...report 1990
- document
-
't Hart, W.G.J. (author), Frijns, R.H.W.M. (author)Constant amplitude tension-compression fatigue tests were performed on notched (± 45, 02, 90, 02)s coupon specimens of the composite systems T300/F593, T400H/6376, T800H//5245C and IM6/APC-2. Delamination damage growth as a function of the number of fatigue cycles was determined using the ultrasonic C-scan technique. Considering the resistance...report 1989
- document
-
't Hart, W.G.J. (author)The damage development In notched (± 45, 0„, 90, 0-) carbon-epoxy coupon specimens tested under different loading conditions was determined. Constant amplitude tests at R = -1 and R = 0.1 as well as flight simulation tests were performed to establish those stress values for which no damage growth occurs.report 1988