Comprehensive validation of three-dimensional finite element modelling of wheel-rail high-frequency interaction via the V-Track test rig

Wheel-rail high-frequency interaction is closely related to the formation of railway short-wave defects. Finite element (FE) method has been widely used to simulate wheel-rail dynamic systems, but its validity in modelling high-frequency interaction has not been fully demonstrated in three dimensions (3D). This work aims at comprehensively...

An integrated 3D dynamic FE vehicle-track model in elasto-plasticity to investigate short pitch corrugation under cyclic wheel loads

The mechanism of rail short pitch corrugation has remained elusive in the past. The damage mechanisms of the corrugation are reported to be differential wear or plastic deformation. The former has been extensively studied, while the plastic deformation, especially under multiple wheel passages has been seldom studied. To uncover the facts...

Pre-cracking development of weld-induced squats due to plastic deformation: Five-year field monitoring and numerical analysis

Weld-induced squats are a major damage type in high-speed railways as well as in conventional railways. They incur high maintenance costs and endanger operational safety. This paper first presents and analyzes five-year continual field monitoring observations and measurements of squats at rail welds. A hypothesis of the formation and development...

New insights into the short pitch corrugation development enigma based on 3D-FE dynamic vehicle-track coupled modelling in frictional rolling contact

A three-dimensional (3D) finite element (FE) dynamic frictional rolling contact model is presented for the study of short pitch corrugation that considers direct and instantaneous coupling between the contact mechanics and the structural dynamics in a vehicle-track system. In this study, we examine the system responses in terms of vibration...

Development of a New Downscale Setup for Wheel-Rail Contact Experiments under Impact Loading Conditions

A new downscale test rig is developed for investigating the contact between the wheel and rail under impact-like loading conditions. This paper presents the development process of the setup, including review and synthesis of the potential experimental techniques, followed by scalability, mechanical and operational analysis of the new setup. The...

Fast estimation of the derailment risk of a braking train in curves and turnouts

When a train runs through a turnout or a sharp curve, high lateral forces occur between the wheels and rails. These lateral forces increase when the couplers between the wagons are loaded in compression, i.e., a rear locomotive pushing a train or a front locomotive braking a train. This study quantifies these effects for a train that begins...

Sensitivity analysis of railpad parameters on vertical railway track dynamics

This paper presents a sensitivity analysis of railpad parameters on vertical railway track dynamics, incorporating the nonlinear behavior of the fastening (i.e., downward forces compress the railpad whereas upward forces are resisted by the clamps). For this purpose, solid railpads, rail-railpad contact and preloaded springs are defined in a...

Experimental study of key parameters investigation in turnout crossing degradation process

The continuous increasing demand of public transportation capacity requires the railway network operating in tight schedule. The high transporting volumes not only aggravate the degradation of railway infrastructure but also shorten the time for maintenance. Well-arranged infrastructure maintenance contributes to the budget reduction and...

A 3D finite element modeling of hammer test for track parameter identification

In railway tracks, short wave rail surface defects give rise to high wheel-rail dynamic forces and noise. Having a better insight into short wave defect occurrence could lead to development of adapted maintenance methods or track design to delay or avoid defect, so that the high short wave defect related maintenance costs may be reduced. As part...