Average wave overtopping discharges for complex geometry: A case study for the prediction of average wave overtopping discharges with stepped revetment in the cross-section

Witteveen+Bos as part of construction consortium Nautilus, has prepared the design of a sea defence system in Middelkerke. The very shallow water conditions (h/Hm0 = 0.3) and complex geometry of the structure, i.e. a high berm and stepped revetment, caused uncertainties in the usage of the empirical equations from the EurOtop Manual (2018) for...

Reduction of wave overtopping and force impact at harbor quays due to very oblique waves

Physical model experiments were conducted in a wave tank at Flanders Hydraulics Research, Antwerp, Belgium, to characterize the wave overtopping and impact force on vertical quay walls and sloping sea dike (1:2.5) under very oblique wave attack (angle between 45° and 80°). This study was triggered by the scarce scientific literature on the...

Validation of Swash for wave overtopping

Comparison of measured overtopping data with computations with Swash. The SWASH output discharges are smaller than the 5% lower limit of Eurotop and Neural Network predictions. Nevertheless, they were close values and they have the same order of magnitude, which is very important when comparing overtopping values. No refection analysis was done....