- document
-
Hosseini, A. (author), Calis, Randy (author), van der Plas, Dirk (author), Put, Pieter (author), Agema, Jelle (author), Meijer, Koen (author), Hage, Johannes (author), Offerman, S.E. (author), Yang, Y. (author)The HIsarna off-gas system wall is a cooling jacket made of cooling pipes arranged in the radial direction and in a circular pattern. Part of the off-gas system cooling pipes are isolated using a low-thermal-conductivity refractory material to protect the cooling pipe from melting and thermal stresses. During long runs and due to...journal article 2023
- document
-
Corley-Wiciak, Cedric (author), Richter, Carsten (author), Zoellner, Marvin H. (author), Zaitsev, Ignatii (author), Manganelli, Costanza L. (author), Hendrickx, N.W. (author), Sammak, A. (author), Veldhorst, M. (author), Scappucci, G. (author)A strained Ge quantum well, grown on a SiGe/Si virtual substrate and hosting two electrostatically defined hole spin qubits, is nondestructively investigated by synchrotron-based scanning X-ray diffraction microscopy to determine all its Bravais lattice parameters. This allows rendering the three-dimensional spatial dependence of the six...journal article 2023
- document
-
Abdel-Monsef, S. (author), Tijs, B.H.A.H. (author), Renart, J. (author), Turon, A. (author)The complex failure mechanisms involved in failure of interfaces requires the use of an accurate description of the cohesive law. In recent years, there have been many developments to determine the full shape of the cohesive law. However, most of the existing cohesive zone models assume a simplified shape, such as bilinear, trapezoidal or...journal article 2023
- document
-
Towards safe shearography inspection of thick composites with controlled surface temperature heatingTao, N. (author), Anisimov, A. (author), Groves, R.M. (author)Thick glass fiber-reinforced polymer (GFRP) composites, e.g. thickness of more than 50 mm, are increasingly used in a wide variety of industries, particularly in the marine and wind energy sectors. Defect detection and characterisation in these composites remain appealing challenges due to the material complexity and the presence of various...journal article 2023
- document
-
Tolooiyan, Ali (author), Gavin, Kenneth (author), Dyson, Ashley P. (author)Offshore jack-up rigs are most commonly founded on large-diameter conical “spudcan” foundations, which are frequently designed using traditional analytical methods for shallow footings. This paper presents the design of a spudcan installed off the coast of Tunisia. The maximum penetration depth of the footing under the available preload is...journal article 2023
- document
-
Meeusen, M. (author), van Dam, J.P.B. (author), Madelat, N. (author), Jalilian, E. (author), Wouters, B. (author), Hauffman, T. (author), Van Assche, G. (author), Mol, J.M.C. (author), Hubin, A. (author), Terryn, H.A. (author)In this work, a new finite element modelling (FEM) approach is followed to model spatiotemporally resolved water uptake in organic coatings. To this aim, we start from a physical model, where not only Fickian diffusion of water is taken into account but also the adsorption/desorption reaction of water on the polymer matrix. Starting from a...journal article 2023
- document
-
Fang, P. (author), Li, Xiao (author), Jiang, X. (author), Hopman, J.J. (author), Bai, Yong (author)Predicting the bending behaviours of a submarine power cable (SPC) is always a tough task due to its complex geometry and inner layer contact, not to mention the stick–slip mechanism. A full-scale finite element model is cumbersome during the early design stage and a more efficient model for practical use is required. Therefore, in this paper...journal article 2023
- document
-
Ma, Yuanxing (author), Shi, Baobin (author), Ali, Liaqat (author), Bai, Yong (author), Fang, P. (author)Wire ropes are widely observed in many industries such as marine engineering and civil engineering, as a type of structure that can bear huge axial force. There are various kinds of wire ropes in practical engineering, corresponding to different usage scenarios. This paper focuses on 6 × 36SW + 1WR with a diameter of 16 mm. The axial...journal article 2023
- document
-
Hedayati, R. (author), Yousefi, Armin (author), Bodaghi, Mahdi (author)With dramatic increase in 3D printing applications in industry, sandwich panels with 3D printed cores have gained a lot of attention recently. In harmony with global movement towards sustainability and low-carbon emission industries, sandwich panels with easy-to-repair and cost-effective cores would be very attractive structures. In this...journal article 2022
- document
-
Zhang, J. (author), Aragon, A.M. (author)Stress analysis is an all-pervasive practice in engineering design. With displacement-based finite element analysis, directly-calculated stress fields are obtained in a post-processing step by computing the gradient of the displacement field—therefore less accurate. In enriched finite element analysis (EFEA), which provides unprecedented...journal article 2022
- document
-
Tao, N. (author), Anisimov, A. (author), Groves, R.M. (author)Thick composite materials are commonly used as load-bearing structures in marine applications. Developing a suitable and sophisticated non-destructive testing (NDT) method for thick composites is an urgent challenge to improve the safety, reliability and maintenance of these structures. Digital shearography has become an important NDT...journal article 2022
- document
-
Liu, D. (author), van den Boom, S.J. (author), Simone, A. (author), Aragon, A.M. (author)We propose an enriched finite element formulation to address the computational modeling of contact problems and the coupling of non-conforming discretizations in the small deformation setting. The displacement field is augmented by enriched terms that are associated with generalized degrees of freedom collocated along non-conforming...journal article 2022
- document
-
Tao, N. (author), Anisimov, A. (author), Groves, R.M. (author)This study aims at improving shearography non-destructive testing (NDT) of deep defects in thick composites with thermal loading. Instead of conventional global heating (GH), the core idea is to apply novel spatially modulated heating (SMH) for shearography NDT. In this paper, the finite element method (FEM) has been used to advance...journal article 2022
- document
-
Korswagen, Paul A. (author), Longo, M. (author), Rots, J.G. (author)The probability of light damage to unprepared, unreinforced masonry structures exposed to induced seismicity due to gas extraction in the north of the Netherlands is still under investigation. Repeated light seismic excitations caused by frequent, light and nearby earthquakes have been linked to economical losses and societal unrest in...journal article 2022
- document
-
Saberi, Saeid (author), Sadat Hosseini, Alireza (author), Yazdanifar, Fatemeh (author), Castro, Saullo G.P. (author)For the last three decades, bistable composite laminates have gained publicity because of their outstanding features, including having two stable shapes and the ability to change these states. A common challenge regarding the analysis of these structures is the high computational cost of existing analytical methods to estimate their natural...journal article 2022
- document
-
Dwarka, V.N.S.R. (author), Vuik, Cornelis (author)In researching the Helmholtz equation, the focus has either been on the accuracy of the numerical solution (pollution) or the acceleration of the convergence of a preconditioned Krylov-based solver (scalability). While it is widely recognized that the convergence properties can be investigated by studying the eigenvalues, information from the...journal article 2021
- document
-
van den Boom, S.J. (author), van Keulen, A. (author), Aragon, A.M. (author)An immersed enriched finite element method is proposed for the analysis of phononic crystals (PnCs) with finite element (FE) meshes that are completely decoupled from geometry. Particularly, a technique is proposed to prescribe Bloch–Floquet periodic boundary conditions strongly on non-matching edges of the periodic unit cell (PUC). The...journal article 2021
- document
-
Dermentzoglou, Dimitrios (author), Castellino, Myrta (author), De Girolamo, Paolo (author), Partovi, Maziar (author), Schreppers, Gerd-Jan (author), Antonini, A. (author)Several failures of recurved concrete crownwalls have been observed in recent years. This work aims to get a better insight within the processes underlying the loading phase of these structures due to non-breaking wave impulsive loading conditions and to identify the dominant failure modes. The investigation is carried out through an offline one...journal article 2021
- document
-
Blank, B. (author), Barletta, V. (author), Hu, H. (author), Pappa, F. (author), van der Wal, W. (author)Accurate glacial isostatic adjustment (GIA) models are required for correcting measurements of mass change in Antarctica and for improving knowledge of the sub-surface, especially in areas of large current ice loss such as the Amundsen Sea Embayment (ASE). Regionally, seismic and gravity data suggests lateral differences in viscosity (3D)....journal article 2021
- document
-
Fazzi, L. (author), Valvano, S. (author), Alaimo, Andrea (author), Groves, R.M. (author)A simultaneous two-parameter single sensor based on weakly tilted Fibre Bragg Grating (TFBG), embedded in a 1 mm glass fibre/epoxy composite plate, is demonstrated to measure independently the temperature and strain variations induced in the material by the exposure to heating lamps. The spectrum of weakly TFBGs is composed of several peaks...journal article 2021