Searched for: subject%3A%22Fatigue%22
(21 - 40 of 745)

Pages

document
Khoshmanesh, S. (author), Watson, S.J. (author), Zarouchas, D. (author)
Wind turbine blades carry the risk of impact damage during transportation, installation, and operation. Such impacts can cause levels of damage that can propagate throughout the structure compromising performance and safety. In this study, the effect of impact damage on fatigue damage propagation in test specimens representative of a spar cap...
journal article 2024
document
Mendez-Morales, Mariela (author), Branco, Ricardo (author), Tankova, T. (author), Rebelo, Carlos (author)
Wire Arc Additive Manufacturing (WAAM) has gained popularity due to its speed and cost-effectiveness. However, the current knowledge on the cyclic deformation behaviour of WAAM materials is limited. To address this issue, this study investigates the cyclic deformation behaviour of WAAM ER70S-6 carbon steel. Coupons were extracted from printed...
journal article 2024
document
Gan, Yidong (author), Liang, M. (author), Schlangen, E. (author), van Breugel, K. (author), Šavija, B. (author)
This study employs a lattice fracture model to simulate static and fatigue fracture behaviour of Interfacial Transition Zone (ITZ) at microscale and mortar at mesoscale. The heterogeneous microstructure of ITZ and mesostructure of mortar are explicitly considered in the models. The initial step involves calibrating and validating the...
journal article 2024
document
Zheng, Kaifeng (author), Feng, Xiaoyang (author), He, Xiaohui (author), Heng, J. (author), Li, Le (author), Wang, Hongfu (author)
In order to improve the fatigue resistance of orthotropic steel decks (OSDs), the steel bridge deck was annealed to reduce the welding residual stress of key welds. This work at first presented a systematical review and discussion over the distribution pattern of welding residual stress in OSDs, in accordance with a conceptual analysis...
journal article 2024
document
Shakeri, I. (author), Wu, W. (author), Michel, Alexander (author), Eder, Martin A. (author)
The present study proposes a novel model to modify master S-N curves of components according to their load redistribution capability reflected in different boundary conditions (BCs) based on the fracture mechanics analysis. To that end, a comprehensive numerical study was conducted on a Single Edge Notch Bend (SENB) specimen constrained with...
journal article 2024
document
Gao, Y. (author), Liu, X. (author), Ren, S. (author), Assaf Martinez-Streignard, E.I. (author), Liu, Pengfei (author), Zhang, Yuqing (author)
Bitumen fatigue resistance is critical to determine the overall fatigue performance and service life of asphalt pavements. However, the mechanisms responsible for fatigue damage of bitumen have previously not been well understood. Molecular dynamics (MD) simulation has recently emerged as a powerful computer-aided numerical technique to model...
journal article 2024
document
Leonetti, D. (author), Schotsman, B. (author)
This study reports an experimental investigation of the fatigue and fracture resistance of R350HT, a heat-treated pearlitic rail steel with refined microstructure used in rails. Monotonic tensile, rotating bending, linear elastic plane strain fracture toughness, and fatigue crack growth rate tests are presented. The results are used to...
journal article 2024
document
Moradi, M. (author), Gul, F.C. (author), Zarouchas, D. (author)
Developing comprehensive health indicators (HIs) for composite structures encompassing various damage types is challenging due to the stochastic nature of damage accumulation and uncertain events (like impact) during operation. This complexity is amplified when striving for HIs independent of historical data. This paper introduces an AI...
journal article 2024
document
Ji, C. (author), Hu, Jiqiang (author), Alderliesten, R.C. (author), Yang, Jinchuan (author), Zhou, Zhengong (author), Sun, Yuguo (author), Wang, Bing (author)
This paper aims to illustrate the effect of the impact damage on fatigue behavior of CF/PEEK-titanium hybrid laminates. To achieve this end, a fatigue life model was proposed to predict the S–N curves of the laminates at various initial impact energy levels and stress ratios based on the energy dissipation approach. The energy dissipation...
journal article 2024
document
Yao, L. (author), Chuai, Mingyue (author), Li, Hanyue (author), Chen, Xiangming (author), Quan, D. (author), Alderliesten, R.C. (author), Beyens, M. (author)
Temperature can significantly affect fatigue delamination growth (FDG) behavior in composites, while fiber bridging has been frequently reported during FDG. The focus of this study was therefore on investigating temperature effects on FDG behavior with fiber bridging. Mode I fatigue delamination experiments were conducted on a thermoset...
journal article 2024
document
Yao, Liaojun (author), Chuai, Mingyue (author), Lyu, Zhangming (author), Chen, Xiangming (author), Guo, Licheng (author), Alderliesten, R.C. (author)
Methods based on fracture mechanics have been widely used in fatigue delamination growth (FDG) characterization of composite laminates. These methods are based on the similitude hypothesis. It is therefore important to have appropriate parameters to well represent the similitude, which is useful for fatigue delamination test standard...
journal article 2024
document
Yao, Liaojun (author), Wang, Jiexiong (author), He, Yonglyu (author), Zhao, Xiuhui (author), Chen, Xiangming (author), Liu, J. (author), Guo, Licheng (author), Alderliesten, R.C. (author)
Fatigue delamination growth (FDG) is an important failure in composite structures during their long-term operations. Hygrothermal aging can have significant effects on interlaminar resistance. It is therefore really necessary to explore FDG behavior in composite laminates with hygrothermal aging. Dynamic mechanical thermal analysis (DMTA),...
journal article 2024
document
Iori, J. (author), Bottasso, Carlo Luigi (author), McWilliam, Michael Kenneth (author)
Control co-design is a promising approach for wind turbine design due to the importance of the controller in power production, stability, load alleviation, and the resulting coupled effects on the sizing of the turbine components. However, the high computational effort required to solve optimization problems with added control design variables...
journal article 2024
document
Yao, Liaojun (author), Wei, Jingchao (author), He, Zixian (author), He, Yonglyu (author), Lomov, Stepan V. (author), Alderliesten, R.C. (author)
Hygrothermal ageing has detrimental effect of the fatigue delamination growth (FDG) in carbon fibre reinforced polymer laminates, and may increase the crack growth rate by a factor of ∼5. The paper examines, how this degradation for Mode I fatigue delamination is affected by the severity of the ageing conditions. Fatigue delamination tests...
journal article 2024
document
Mahmoudi, Ali (author), Acosta, J. David (author), Jalalvand, Meisam (author), Fotouhi, M. (author), Wisnom, Michael R. (author), Khonsari, Michael M. (author)
A sensor for visualizing the fatigue load cycles was designed, fabricated, and tested. The sensor is made of a glass/carbon hybrid composite and utilizes the delamination length at the glass/carbon interface as an indicator for fatigue cycles. Appropriate design parameters were obtained by performing finite element analysis on the...
journal article 2024
document
Noukari, Athanasia (author)
With the continuous increase in transportation volume, bridges face the challenge of carrying higher traffic loads. As a result, bridges undergo fatigue due to repeated and increasing loads, leading to progressive deterioration of their structural reliability. While existing codes already account for several variables affecting the concrete's...
master thesis 2023
document
Romijn, Kasja (author)
Over the past few decades, the Netherlands has built numerous steel railway bridges to improve its infrastructure. The repeated loading from railway traffic makes steel bridges susceptible to fatigue damage. The stress ranges at fatigue-prone locations are generally higher in railway bridges than in road traffic bridges. Due to the limited space...
master thesis 2023
document
Jongbloed, Koen (author)
Muscle fatigue's indirect link to higher athletic injury risks is a key focus of this study. It highlights how fatigue-induced shifts in muscle resource allocation and movement patterns can lead to biomechanical imbalances, subsequently heightening injury susceptibility. Addressing high injury rates in athletics, this study was conducted in two...
master thesis 2023
document
Kazmi, Syed Baqir Ali (author)
This dissertation endeavors to introduce a novel supervised Structural Health Monitoring (SHM) methodology for the detection of damage and the prediction of fatigue life in asphalt concrete materials. Grounded in the principles of S-N (strain-number of cycles until failure) curves, this research addresses the intricate task of proficiently...
master thesis 2023
document
Beer, Theresa (author)
With the rising demand for renewable energy, floating offshore wind turbines have gained importance, particularly in regions where deep waters prevent the use of traditional monopile structures. These floating turbines rely on mooring lines for stability against environmental conditions, particularly when facing strong winds and high waves....
master thesis 2023
Searched for: subject%3A%22Fatigue%22
(21 - 40 of 745)

Pages