Estimation of power performances and flow characteristics for a Savonius rotor by vortex particle method

This study investigates the implementation of the vortex particle method (VPM) with the goal of efficiently and accurately estimating the power performances and flow characteristics for a Savonius rotor. The accuracy and efficiency of simulation methods are critical for the reliable design of Savonius rotors. Among various approaches, VPM is...

Wind tunnel tests of a wing at all angles of attack

Tailsitters have complex aerodynamics that make them hard to control throughout the entire flight envelope, especially at very high angle of attack (AoA) and reverse flow conditions. The development of controllers for these vehicles is hampered by the absence of publicly available data on forces and moments experienced in such conditions. In...

Rheology of Mud: An Overview for Ports and Waterways Applications

Mud, a cohesive material, consists of water, clay minerals, sand, silt and small quantities of organic matter (i.e., biopolymers). Amongst the different mud layers formed by human or natural activities, the fluid mud layer found on top of all the others is quite important from navigational point of view in ports and waterways. Rheological...

Estimation of blade loads for a variable pitch vertical axis wind turbine from particle image velocimetry

This paper presents the flow fields and aerodynamic loading of a two bladed H-type vertical axis wind turbine with active variable pitch for load and circulation control. Particle Image Velocimetry is used to capture flow fields at six azimuthal positions of the blades during operation, three upwind and three downwind. Flow phenomena such as...

Design principles for efficient photoelectrodes in solar rechargeable redox flow cell applications

Recent advances in photoelectrochemical redox flow cells, such as solar redox flow batteries, have received much attention as an alternative integrated technology for simultaneous conversion and storage of solar energy. Theoretically, it has been reported that even single- photon devices can demonstrate unbiased photo-charging with high solar-to...

Multi-objective optimization of Resin Infusion

The present paper addresses the multi-objective optimization of the filling stage of the Resin Infusion manufacturing process. The optimization focuses on the selection of an optimal temperature profile which addresses the tradeoff between filling time and the risk of impeding the flow of resin due to excessive curing. The methodology developed...

Flow Visualization around a Flapping-Wing Micro Air Vehicle in Free Flight Using Large-Scale PIV

Flow visualizations have been performed on a free flying, flapping-wing micro air vehicle (MAV), using a large-scale particle image velocimetry (PIV) approach. The PIV method involves the use of helium-filled soap bubbles (HFSB) as tracer particles. HFSB scatter light with much higher intensity than regular seeding particles, comparable to that...

Mitigation potential of sanitation infrastructure on groundwater contamination by nitrate in maputo

In Maputo, the capital of Mozambique, nitrate concentrations above 250 mg L??1 in groundwater have been reported. This happens due to the widespread use of latrines and septic tanks that allow for constant infiltration of its content into the soil and eventually to groundwater sources, a situation that is widespread in the Global South and...

Creation of aspheric interfaces on an electrowetting liquid lens using surface oscillations

A technique to create aspheric surface shapes on commercially available electrowetting liquid lenses is demonstrated. Based on a previously published surface oscillation model a technique using a Hankel transform is proposed and tested experimentally. An alternating actuation voltage is applied to the liquid lens to stimulate surface...

Performance of Models for Flash Flood Warning and Hazard Assessment: The 2015 Kali Gandaki Landslide Dam Breach in Nepal

The 2015 magnitude 7.8 Gorkha earthquake and its aftershocks weakened mountain slopes in Nepal. Co- and postseismic landsliding and the formation of landslide-dammed lakes along steeply dissected valleys were widespread, among them a landslide that dammed the Kali Gandaki River. Overtopping of the landslide dam resulted in a flash flood...

Estimating the Illumination Direction From Three-Dimensional Texture of Brownian Surfaces

We studied whether human observers can estimate the illumination direction from 3D textures of random Brownian surfaces, containing undulations over a range of scales. The locally Lambertian surfaces were illuminated with a collimated beam from random directions. The surfaces had a uniform albedo and thus texture appeared only through shading...

Newton Power Flow Methods for Unbalanced Three-Phase Distribution Networks

Two mismatch functions (power or current) and three coordinates (polar, Cartesian andcomplex form) result in six versions of the Newton–Raphson method for the solution of powerflow problems. In this paper, five new versions of the Newton power flow method developed forsingle-phase problems in our previous paper are extended to three-phase power...

Brain network clustering with information flow motifs

Recent work has revealed frequency-dependent global patterns of information flow by a network analysis of magnetoencephalography data of the human brain. However, it is unknown which properties on a small subgraph-scale of those functional brain networks are dominant at different frequencies bands. Motifs are the building blocks of networks on...

Biological stability of drinking water: Controlling factors, methods, and challenges

Biological stability of drinking water refers to the concept of providing consumers with drinking water of same microbial quality at the tap as produced at the water treatment facility. However, uncontrolled growth of bacteria can occur during distribution in water mains and premise plumbing, and can lead to hygienic (e.g., development of...

Vortex flow during early and late left ventricular filling in normal subjects: Quantitative characterization using retrospectively-gated 4D flow cardiovascular magnetic resonance and three-dimensional vortex core analysis

Background LV diastolic vortex formation has been suggested to critically contribute to efficient blood pumping function, while altered vortex formation has been associated with LV pathologies. Therefore, quantitative characterization of vortex flow might provide a novel objective tool for evaluating LV function. The objectives of this study...

Quantification of Blood Flow and Topology in Developing Vascular Networks

Since fluid dynamics plays a critical role in vascular remodeling, quantification of the hemodynamics is crucial to gain more insight into this complex process. Better understanding of vascular development can improve prediction of the process, and may eventually even be used to influence the vascular structure. In this study, a methodology to...

Reaction-diffusion analysis for one-step plasma etching and bonding of microfluidic devices

A self-similar reaction front develops in reactive ion etching when the ions penetrate channels of shallow height h. This relates to the patterning of microchannels using a single-step etching and bonding, as described by Rhee et al. [Lab Chip 5, 102 (2005)] . Experimentally, we report that the front location scales as xf ? ht1/2 and the width...