Estimation of load exceedances of an aircraft undercarriage with nonlinear properties excitated by random runway unevenness

In this report various methods to describe a landing gear with nonlinear properties and excitated by random runway unevenness during taxying have been investigated. The results of calculations have been compared to measured results from an analog computer simulation. The mean behaviour, standard deviations and power spectra, can be described...

The determination of gustloads on nonlinear aircraft using a Power Spectral Density approach

Design loads for nonlinear aircraft, i.e. aircraft with gust alleviation system or yaw dampler, cannot be established with the Power Spectral Density method. The only method available is by means of computer simvilation. Methods to approximate load exceedance curves of nonlinear aircraft are proposed in this report. For the derivation of the...

Some methods for the derivation of taxying loads for undercarriages with linear or nonlinear properties.

Methods that are used or probably could be used for the establishment of taxying loads are presented and discussed. The methods are straightforward for undercarriages with linear properties. For undercarriages with nonlinear properties methods based on the use of equivalent gains are promising, but still have to be verified.

Een tweede serie orienterende geluidsvermoeiingsproeven op een triltafel

A second series of exploratory acoustic fatigue tests using a shaker. A second series of exploratory acoustic fatigue tests was carried out, again employing simple specimens mounted on a shaker. Strain measurements were compared with calculations. Crack growth initiated by a central notch was observed. A comparison was made between three types...

The effect of sheet edge working on the fatigue life under flight-simulation loading

Fatigue tests under flight-simulation loading have been performed on unnotched Alclad 2024-T3, anodised 2.0 mm thick sheet specimens, manufactured according to several machine-shop processes applied in the air craft industry. From the results it appears that milling is preferable to stamping. Rounding off the edges is also advantageous. The...

A non-stationary model for atmospheric turbulence patches, for the prediction of aircraft design loads

In this report a model for atmospheric turbulence is proposed. It is assumed that atmospheric turbulence appears in patches and that within the patches the turbulence can be described as a modulated Gaussian process. Statistical properties of this model and of atmospheric turbulence are compared. Using data from various sources a probability...

Effects of crack plane orientation transitions on flight simulation fatigue crack propagation in a high strength aluminium alloy (7050)

The effects of flat to slant fracture transitions on flight simulation fatigue crack propagation in specimens of 7O5O aluminium alloy forgings are discussed. For specimens containing flat, shearlipped, or full slant fractures at similar crack lengths the crack resistance (R curve) approach appears to provide an explanation for differences in the...

Equations for the response of an airplane to non-stationary atmospheric turbulence patches

In this report a method is described to calculate the load exceedance curve for a linear system having a finite, modulated Gaussian process as input. The derivation is based on the use of ensemble averages, defined as the expected values at a certain point of time. The equations can be used for any airplane-transfer function for which the Power...

Comparison between the statistical discrete gust method and the power spectral density method

The Power Spectral Density method and the Statistical Discrete Gust Method to calculate aircraft design loads due to atmospheric turbulence are compared qualitatively and quantitatively on the basis of the load exceedance curves for certain aircraft models. It is shown that both methods are related to each other, giving the same results for...