Searched for: subject%3A%22Microcontroller%22
(1 - 20 of 24)

Pages

document
Goedemondt, Koen (author)
This thesis describes the design and implementation of µLightDigit, which is the second iteration of the LightDigit project: a contactless air-writing system based on ambient light detection with embedded deep learning using only simple photodiodes. The system is able to classify digits 0–9 written in the air by detecting the dynamic hand shadow...
master thesis 2022
document
Narchi, William (author)
This paper presents how a convolutional neural network can be constructed in order to recognise gestures using photodiodes and ambient light. A number of candidates are presented and evaluated, with the most performant being adopted for in-depth analysis. This network is then compressed in order to be ran on an Arduino Nano 33 BLE...
bachelor thesis 2022
document
Croes, Laura (author), Haggerty, Shea (author)
In September 2018, the Smart Teddy project was founded by a group of researchers within the Hague University of Applied Sciences1 in the Netherlands. The Smart Teddy project is a multidisciplinary project aiming to create an interactive system, using a teddy bear as a focus point, which collects the data needed in order to enable seniors with...
bachelor thesis 2021
document
Talluri, Pavan (author)
The adoption of Microprocessors is increasingly diversifying to several embedded and mo- bile devices. Growingly they can also be found in Smart Cards, RFID tags, SIM cards, Pay TVs, identity cards and passports. These devices store, processes and transact sensitive information like social security numbers and credit card numbers. Ensuring...
master thesis 2020
document
van Eijk, Tijmen (author)
The driving and counting electronics for the Superconducting Nanowire Single Photon Detectors (SNSPDs) fabricated and commercialized by Single Quantum (SQ) is currently designed to interface with at most 8 SNSPD channels. Single Quantum is already selling 24 channel systems and the trend is generally towards more channels. In those systems,...
master thesis 2020
document
Gianfranceschi, Giuseppe (author), van Dijk, Robbin (author)
This research investigates the feasibility of a sensor patch for newborns. A sensor patch would be a device that is applied to the skin of the newborn. It can monitor the patient's temperature, heart rate, respiration rate, oxygen saturation and asses its general appearance of the skin so that it can check the newborn for jaundice. It should...
bachelor thesis 2020
document
Sitaldin, Dewwret (author), de Best, David (author), Mollaie Daryani, Salar (author), Nguyen, Van Cong (author), Gelderblom, Joey (author), van Roessel, Joris (author)
The main goal of this Electrical Engineering Bachelor project is to build a solar-power system for a quad-copter that will extend its battery life or rather its flight time. The complete system is comprised of a PV system (PV), a micro-controller (MC) and a DC/DC converter (DC) which was mounted onto the drone. On each subsystem, a separate...
bachelor thesis 2019
document
Geel, Patrick (author), Kleijweg, Zep (author)
This project is to design and implement a reconfigurable measurement interface for Internet of Things sensors, for the Microelectronics Department of the Delft University of Technology. This thesis will discuss the functionality and design process taken in designing such a reconfigurable measurement interface, focusing on generating signals and...
bachelor thesis 2019
document
Hoang, Tu (author), Dumont, Joep (author)
Pressure ulcers develop when skin is subjected to a mechanical load over time, resulting in tissue damage. This occurs when a patient is in the same posture or position for a long period of time. To prevent this Momo Medical is developing a sensor plate that uses sensor data attained from the patient laying on his bed to guide the nurses, whom...
bachelor thesis 2018
document
Treffers, Michael (author), Melman, Bart (author)
Current trailers and caravans use overrun brakes, which cause overheated brakes in the mountains. A solution is to design an electric brake system in which the brakes are controlled electronically instead of mechanically. The report discusses the control models associated with braking, anti-sway detection and velocity sensor fusion. The RDW...
bachelor thesis 2017
document
Blutman, Kristof (author), Kapoor, Ajay (author), Majumdar, Arjun (author), Martinez, Jacinto Garcia (author), Echeverri, Juan (author), Sevat, Leo (author), van der Wel, Arnoud P. (author), Fatemi, Hamed (author), Makinwa, K.A.A. (author)
A 40-nm microcontroller featuring voltage stacked memory and logic is presented. This involved connecting the power domains of the memory and logic in series, such that the ground of one power domain is connected to the positive supply rail of the other. In this paper, an ARM Cortex-M0+ and its peripherals are powered from 0 V to V<sub>DD<...
journal article 2017
document
Van Remundt, M. (author), Witte, T. (author)
This thesis describes the work of two students who designed the control system of a stand-alone water well measuring system, named SubDowser. The project was done by order of a proposal from the start-up company SkyDowser. The total thesis group, consisting of three subgroups, was asked to build a working prototype which could measure the water...
bachelor thesis 2016
document
Thomas, A.P. (author)
In the dynamic domain of motorsport, the most agile is naturally the victor. A race car can only be as efficient as the systems that control it and here lies the importance of automotive embedded systems which offer precise and quick control over the mechanics of the race car. The Gearbox Control Unit (GCU) for the Paddle-shift System is one...
master thesis 2015
document
Qiu, T.D. (author), Van der Veen, N.F.A. (author)
This report proposes a design for a control system for a variable frictionless resistance training device, that is able to set the resistance and give feedback to the user via a wireless connection. The fitness device uses regenerative braking and information about the generated power is sent back to the user. The variable resistance is set...
bachelor thesis 2015
document
Kamau, G.M. (author), Kang'ethe, S. (author), Kamau, S.I. (author), Van de Giesen, N.C. (author)
Lightning data is not only important for environment and weather monitoring but also for safety purposes. A device that monitors and keeps track of occurrences of lightning strikes has been developed. A communication interface is established between the sensors, data logging circuit and the microcontroller. The digital outputs of the lightning...
journal article 2015
document
Blutman, K. (author)
This work introduces a low-power Cortex-M0+ based computing platform for battery-powered, embedded applications. Voltage stacking is used to save power by recycling charge through a power domain between 0V and Vdd, and a power domain stacked on top of it between Vdd and 2Vdd. The technique enables connecting chips of the future directly to the...
master thesis 2014
document
De Roest, M.A. (author), Treep, H.J. (author)
This thesis describes the design, implementation and deployment of a network-based bootloader for distributed embedded systems applications. The bootloader is based NXP's LPC1769 microcontroller containing the ARM Cortex-M3 processor. The CAN bus is used as the network's physical layer. Due to the modular design of the bootloader, easily...
bachelor thesis 2012
document
Jager, I. (author), Angevare, J.A. (author)
With the completion of the MIST1431 multi sensor IC a demonstrator developed by the Electronic Instrumentation Laboratory of Delft University of Technology and NXP, a demonstrator that shows the capabilities of the MIST chip was needed. This thesis describes the implementation of the control unit, which has to control the MIST chip and wireless...
bachelor thesis 2012
document
Lammens, C.T.L.F. (author)
The project ‘an Arduino based modular electronics toolkit’ handles the research and design of a modular electronics prototyping kit, targeted at Industrial Design Engineering students at the Delft University of Technology. At first, during the analysis phase, interviews were conducted with the different stakeholders. These interviews included...
master thesis 2012
document
Ashraf, I. (author)
Microcontroller based embedded systems have witnessed enormous growth in recent decades. Microcontrollers are the most versatile products found in most of the market segments and in several product families spanning from 4-bit to 64-bit processors. The application domain is such that for some applications only a little functionality is required;...
master thesis 2011
Searched for: subject%3A%22Microcontroller%22
(1 - 20 of 24)

Pages