Dynamic optimization for minimal HVAC demand with latent heat storage, heat recovery, natural ventilation, and solar shadings

Satisfying thermal comfort in indoor spaces is still a challenge in terms of energy saving, and several HVAC (Heating, Ventilation, and Air-Conditioning) systems have been proposed for this purpose. This paper conducts an analysis to evaluate and optimize the long-term operation of a novel HVAC system installed at The Green Village, a living...

Distributed Adaptive Optimization with Weight-Balancing

This article addresses the continuous-time distributed optimization of a strictly convex summation-separable cost function with possibly nonconvex local functions over strongly connected digraphs. Distributed optimization methods in the literature require convexity of local functions, or balanced weights, or vanishing step sizes, or algebraic...

Distributed Time-Varying Optimization of Second-Order Multiagent Systems Under Limited Interaction Ranges

This article investigates the distributed time-varying optimization problem for second-order multiagent systems (MASs) under limited interaction ranges. The goal is to seek the minimum of the sum of local time-varying cost functions (CFs), where each CF is only available to the corresponding agent. Limited communication range refers to the...

Enabling Optimal Energy Management with Minimal IoT Requirements: A Legacy A/C Case Study

The existing literature on energy saving focuses on large-scale buildings, wherein the energy-saving potential is substantially larger than smaller-scale buildings. However, the research intensity is significantly less for small-scale deployments and their capacities to regulate energy use individually, directly and without depreciating users’...

A Switching-Based Adaptive Dynamic Programming Method to Optimal Traffic Signaling

The work presented in this paper concerns a switching-based control formulation for multi-intersection and multiphase traffic light systems. A macroscopic traffic flow modeling approach is first presented, which is instrumental to the development of a model-based and switching-based optimization method for traffic signal operation, in the...

A simulation-based traffic signal control for congested urban traffic networks

Traffic congestion in urban networks may lead to strong degradation in the utilization of the network infrastructure, which can be mitigated via suitable control strategies. This paper studies and analyzes the performance of an adaptive traffic-responsive strategy that controls the traffic light parameters in an urban network to reduce...

Integrated condition-based track maintenance planning and crew scheduling of railway networks

We develop a multi-level decision making approach for optimal condition-based maintenance planning of a railway network divided into a large number of sections with independent stochastic deterioration dynamics. At higher level, a chance-constrained Model Predictive Control (MPC) controller determines the long-term section-wise maintenance...

A university building test case for occupancy-based building automation

Heating, ventilation and air-conditioning (HVAC) units in buildings form a system-of-subsystems entity that must be accurately integrated and controlled by the building automation system to ensure the occupants' comfort with reduced energy consumption. As control of HVACs involves a standardized hierarchy of high-level set-point control and...

Automating occupant-building interaction via smart zoning of thermostatic loads: A switched self-tuning approach

Load management actions in large buildings are pre-programmed by field engineers/users in the form of if-then-else rules for the set point of the thermostat. This fixed set of actions prevents smart zoning, i.e. to dynamically regulate the set points in every room at different levels according to geometry, orientation and interaction among...

Optimal model distributions in supervisory adaptive control

Several classes of multi-model adaptive control schemes have been proposed in literature: instead of one single parameter-varying controller, in this adaptive methodology multiple fixed-parameter controllers for different operating regimes (i.e. different models) are utilised. Despite advances in multi-model adaptive control theory, the question...

Occupancy-based demand response and thermal comfort optimization in microgrids with renewable energy sources and energy storage

Integration of renewable energy sources in microgrids can be achieved via demand response programs, which change the electric usage in response to changes in the availability and price of electricity over time. This paper presents a novel control algorithm for joint demand response management and thermal comfort optimization in microgrids...

A supervisory approach to microgrid demand response and climate control

Microgrids equipped with small-scale renewable-energy generation systems and energy storage units offer challenging opportunity from a control point of view. In fact, in order to improve resilience and enable islanded mode, micro-grid energy management systems must dynamically manage controllable loads by considering not only matching energy...

Adaptive optimization for active queue management supporting TCP flows

An adaptive decentralized strategy for active queue management of TCP flows over communication networks is presented. The proposed strategy solves locally, at each link, an optimal control problem, minimizing a cost composed of residual capacity and buffer queue size. The solution of the optimal control problem exploits an adaptive...

Online policy iterations for optimal control of input-saturated systems

This work proposes an online policy iteration procedure for the synthesis of sub-optimal control laws for uncertain Linear Time Invariant (LTI) Asymptotically Null-Controllable with Bounded Inputs (ANCBI) systems. The proposed policy iteration method relies on: a policy evaluation step with a piecewise quadratic Lyapunov function in both the...

An iterative Sum-of-Squares optimization for static output feedback of polynomial systems

This work proposes an iterative procedure for static output feedback of polynomial systems based on Sum-of-Squares optimization. Necessary and sufficient conditions for static output feedback stabilization of polynomial systems are formulated, both for the global and for the local stabilization case. Since the proposed conditions are bilinear...