Novel dopant-free carrier selective contacts for c-Si solar cell

The overdependence on the tradition energy source have caused a serious of ecologi-cal problems such as the increasing emission of carbon dioxide. To combat this and achieve carbon neutrality, attention has shifted towards sustainable energy, particu-larly wind, tidal, and solar energy. The solar cell catches significant interest due to its...

A High-Efficiency 2-Switch Bipolar Boost Converter with PV-assisted Startup Voltage for the Bipolar Thermoelectric Energy Harvesting

With the great application potential of the Internet of Things (IoT), a reliable power supply solution for IoT plays an important role during the development of IoT and other advanced applications. Among all the options including the electricity grid, batteries, and energy harvesting systems, the energy harvesting systems are considered with...

In Situ Annealing of Boron-Doped Amorphous Silicon Layers Using APCVD Technology

In this work, we developed an in situ annealing process to crystallize boron-doped amorphous silicon [a-Si(p+)] layers deposited by atmospheric pressure chemical vapour deposition (APCVD) to form boron-doped polycrystalline silicon [poly-Si(p+)] layers. The influence of the temperature profiles during a-Si(p+) inline deposition on structural,...

Mitigating Cut Losses in Interdigitated Back Contact Solar Cells

The edge recombination losses of crystalline silicon solar cells become significant when they are cut into smaller pieces to be assembled into modules. With the interdigitated pattern of doped p and n regions on the rear side, the interdigitated back contact (IBC) solar cells can be cut through different doped regions. In this study, the...

Screen Printed Fire-Through Contact Formation for Polysilicon-Passivated Contacts and Phosphorus-Diffused Contacts

In this article, we investigate the passivation quality and electrical contact properties for samples with a 150 nm thick n+ polysilicon layer in comparison to samples with a phosphorus diffused layer. High level of passivation is achieved for the samples with n+ polysilicon layer and an interfacial oxide underneath it. The contact properties...

Optimization of Three-Terminal Perovskite/Silicon Tandem Solar Cells

We use simulations to optimize perovskite/silicon tandem solar cells in a novel three-terminal configuration, with one terminal at the front and two at the rear. We consider configurations in which the top cell has either the inverted or the same polarity as the bottom cell. Our goal is to minimize the optical losses, to compare the...

Too Many Junctions?: A Case Study of Multijunction Thin-Film Silicon Solar Cells

The benefit of two-terminal multijunction solar cells in regard to the number<br/>of junctions (subcells) is critically evaluated. The optical and electrical losses<br/>inherent in the construction of multijunction cells are analyzed using information<br/>from thin-film silicon photovoltaics as a representative case. Although<br/>the...

Solar fuel production by using PV/PEC junctions based on earth-abundant materials

One of the main problems of renewable energies is storage of the energy carrier. For long-term storage, solar fuels seem to be a good option. Direct solar water splitting could play an important role in the production of these solar fuels. One of the main challenges of this process is the charge separation and collection at the interfaces. The...

Ag NWs for Organic Photovoltaic Cells: Semitransparent and Stretchable Devices

The current developments on organic photovoltaic (OPV) solar cells are inspired by the idea that they can be processed from solution. One of the challenges in developing fully solution-processed OPV devices is the design of well-performing electrodes with low cost of deposition. This has been one of the focus of the academic and industrial...