Searched for: subject%3A%22Plaxis%22
(1 - 20 of 76)

Pages

document
Portillo Arreguin, Diana (author)
This thesis examines the load distribution on 60 m long piles under gradual static loading, considering the POST Rotterdam high-rise building as the study project. The research employs fibre optic (FO) instrumentation on site to monitor strain changes in the piles over time and assess load transfer mechanisms. This data is integrated into a...
master thesis 2023
document
SKORDILIS, VASILEIOS (author)
The stability of rock engineering projects is tightly related to the mechanical behaviour of rock discontinuities. Although the mechanical behaviour of a discontinuity is often associated with shearing (sliding), experimental data have shown that it can be accompanied by more complex phenomena such as dilation and post-peak strength reduction....
master thesis 2023
document
Miranda Challapa, Victor Hugo (author)
Tailings dam failures are one of the most destructive phenomena in terms of the number of victims and the environmental impact generated. Over the years, different causes have been identified, with flow liquefaction being a prominent factor to consider when assessing the stability of tailings deposits. Due to the complex nature of these events,...
master thesis 2023
document
Peerden, Jur (author)
The objective of this thesis is to enhance understanding of the behaviour of a flexible dolphin and its interaction with the surrounding soil in order to determine the optimal embedded depth. A comprehensive field test is conducted to gain deeper insights into the behaviour of the flexible dolphin and the soil surrounding the pile. The test...
master thesis 2023
document
Theunisse, Arnoud (author)
The aim of this research is to investigate which design method results in the best approximation of the deformations of a quay wall consisting of an anchored combined wall with relieving platform, looking at the elastoplastic method and the finite element method. The elastoplastic method is performed with the program D-Sheet Piling and the...
master thesis 2023
document
Lieftinck, Joris (author)
The inner-city of Amsterdam contains a large network of vulnerable, historic quay walls. Most of these quay walls consist out of masonry gravity walls placed on wooden relieving floors and wooden foundation piles. Due to the changing surface loading conditions behind the wall and the degradation of the masonry and wooden structures over the last...
master thesis 2023
document
Patrikis, Konstantinos (author)
Quay walls are often designed with Finite Element models (FE models) to take into account the complex soil-structure interaction and highly non-linear soil behavior. However, the effect of temperature variations is uncertain if it is taken into account in the design of the quay walls at the Port of Rotterdam.<br/><br/>Nowadays, new quay walls...
master thesis 2023
document
Hartman, Illona (author)
In the field of structural and geotechnical engineering, a uniform approach to predict and model foundation settlements during the design phase of a high-rise building appears to be missing. In the Netherlands, pile foundations of tower structures underlain by compressible soil layers are challenging to model due to different stiffness and load...
master thesis 2023
document
Rossetti, Matteo (author)
Terps are artificial dwelling mounds mostly found in the northern regions of the Netherlands, built to provide safe ground against water in such areas affected by flooding, storm surges, and high tides, before the development of dikes. In this thesis, the stability of these terps was evaluated via FEM models and analyses performed on PLAXIS....
master thesis 2022
document
Pană, Paul (author)
As a consequence of the difficulty to obtain complete direct information about the subsurface, and the importance of heterogeneity of soil properties in geotechnical design, a desire exists in the geotechnical community for a smarter use of the available data in common practice. The objective of this thesis is to provide a potential solution for...
master thesis 2022
document
PAVLAKIS, DIMITRIS (author)
The case study of the outer lock head of the New Terneuzen Lock is considered to investigate the behavior of the Boom Clay and to develop an automated method for improving the deformation predictions in a deep excavation format. The initiative to perform this study was the uncertainty in modeling the Boom Clay behavior during the design and the...
master thesis 2022
document
Kwok, Matthew (author)
The 1st Heinenoordtunnel is an immersed tube which has been open for service in the Netherlands since 1969. Over the past 50 years, a large and increasing settlement has been measured along the tunnel alignment. The greatest value of settlement (65 mm) occurs in tunnel element 1 from 1978 to 2018. The maximum differential settlement has reached...
master thesis 2022
document
de Voogd, Rein (author)
Monopiles with large diameter (larger than 6 m) and low aspect ratio (less than 6) are increasingly used in offshore wind farms. These foundations demonstrate a rigid response under lateral loading. The validity of the existing design methods, that are based on small diameter flexible piles, has been questioned by both the industry and...
master thesis 2022
document
Mohanty, Avinab (author)
Vibratory installation of piles and casings can be extremely economical, therefore the contractors prefer pile driving. When compared to impact pile driving, vibratory pile driving generates less noise but this installation method is still fraught with uncertainties (Rausche 2003). Environmental effects (such as ground vibrations) have negative...
master thesis 2022
document
Harrouni, Mohamed (author)
Over the past decades an increase in underground construction is observed. Deep excavations are among the structures used for underground construction. The construction of such structures often affects nearby existing structures and causes possibly even damages.<br/>The prediction of these damages is usually done by following these steps:<br/>1....
master thesis 2022
document
van der Werf, Jilles (author)
Reliability analysis is a rational method for dealing with uncertainties. It is increasingly used for the design and assessment of (civil) structures. Reliability analysis, possibly in combination with performance data, allows for instance to update (extend) the lifetime of existing quay wall structures. This gives economic advantages when...
master thesis 2021
document
Paduli, Francisco (author)
The Automated Parameter Determination project aims to provide advanced geotechnical models parameters from in-situ tests in a transparent and flexible process. The framework was initially developed for coarse-grained soils, and it was needed to be expanded to all types of common soils. This report presents the expansion of the APD database to...
master thesis 2021
document
Liao, Kan (author)
The suction pile foundation is a large steel cylinder with an open end and sealed top. This foundation type is widely used in the oil&amp;gas industry and wind energy. Experimental investigation and numerical investigation are the main two methods to understand the performance of the suction bucket foundation. The experimental studies are...
master thesis 2020
document
Molenaar, Floor (author)
With changing climatic conditions, droughts are expected to increase in duration and intensity. Under drying conditions, desiccation cracks can form in clay soil, which is often used as dyke cover and in some cases also for the core of the dyke. These desiccation cracks have a potential impact on the stability of dykes. The main objective of...
master thesis 2020
document
Spannenburg, Trevor (author)
Amsterdam and many other cities consist of a network of old quay walls, which sometimes have been constructed over a century ago. A large uncertainty exists concerning the current safety of these quay walls and their remaining service lifetime. In the current framework for the assessment of old urban quay walls, the influence of timber creep in...
master thesis 2020
Searched for: subject%3A%22Plaxis%22
(1 - 20 of 76)

Pages