document

The Jominy end-quench test for investigation of corrosion properties and microstructure of high strength aluminium alloys

't Hart, W.G.J. (author), Kolkman, H.J. (author), Schra, L. (author)

The Jominy end-quench test was applied to extruded rods of the aluminium alloys 2024 and 7075 to obtain a decreasing quench rate over the length of the rods. Subsequently the alloys were heat treated to the conditions: 2024-T4, 2024-T6, 7075-T73. A corrosion investigation and a transmission electron microscopy investigation were performed to...

report 1980

document

Coarsening and solutioning of precipitates in superalloys

Kolkman, H.J. (author)

Coarsening and solutioning of the main strengthening phase for the majority of superalloys, the y' phase, are discussed. It is shown that a general prediction of coarsening rates and solutioning temperatures is possible.

report 1981

document

On precipitation in rapidly solidified Aluminium-Silicon alloys as studied by X-ray diffraction

Van Mourik, P. (author), Mittemeijer, E.J. (author), De Keijser, T. (author)

conference paper 1983

document

Precipitation of Silicon in a Solid Quenched Aluminium- ilicon (1.3 at yo) Alloy Studied by Positron Annihilation

Seegers, D. (author), Van Mourik, P. (author), Van Wijngaarden, M.H. (author), Rao, B.M. (author)

Doppler broadening of the positron annihilation line was measured for quenched and aged specimens of an aluminium-silicon (1.29 at%Si) alloy. One set of specimens was aged at room temperature (set A) and one set was isochronally (t = 30 min) aged at temperatures ranging from 347 to 884 K (set B). The lineshape parameter S measured in the as...

journal article 1984

document

Development of conceptual rainfall-runoff models for the personal computer

Chang, C.T. (author)

Nowadays, the development in the personal computer hardware and software is very fast. It is more and more applicable with its recursive calculation character in hydrological modelling. By applying system analysis and system synthesis, it becomes a fashion in hydrological modelling to use the conceptual models instead of black-box models. This...

master thesis 1988

document

Precipitatieverschijnselen en spanningseffecten in geavanceerde aluminiumlegeringen

Van Mourik, P. (author), Van Rooijen, M. (author)

journal article 1990

document

Precipitation in a solid-quenched, particle-reinforced Al-Si-Cu-Mg alloy: Phase identification and kinetics

Starink, M.J. (author), Jooris, V. (author), Van Mourik, P. (author)

conference paper 1991

document

Calcium carbonate precipitation in relation to detergent performance

Verdoes, D. (author)

doctoral thesis 1991

document

System design for ARTEMIS environmental monitoring

van Ingen Schenau, H.A. (author), Spaa, J. (author)

This paper describes aspects of system design applied to the ARTEMIS environmental monitoring system of the Food and Agriculture Organization (FAO) of the United Nations. The design aspects are derived from characteristics of the monitoring function and are based on methods of rainfall and vegetation monitoring from satellite observations which...

report 1992

document

Precipitatie in aluminium-metaal matrix composieten

Starink, M.J. (author), Van Mourik, P. (author)

journal article 1992

document

Gas-to-particle conversion in the particle precipitation-aided chemical vapor deposition process. II: Synthesis of the perovskite oxide yttrium chromite. The role of aerosols in materials processing

Van Dieten, V.E.J. (author), Dekker, J.P. (author), Hurkmans, E.J. (author), Schoonman, J. (author)

journal article 1993

document

Gas-to-particle conversion in the particle precipitation-aided chemical vapor deposition process. I: Synthesis of the binary compound titanium nitride. The role of aerosols in materials processing

Dekker, J.P. (author), Van der Put, P.J. (author), Veringa, H.J. (author), Schoonman, J. (author), Pratsinis, S.E. (author)

journal article 1993

document

Études calorimétriques différientielles de la précipitation dans quelques alliages d'aluminium

Van Mourik, P. (author), Starink, M.J. (author)

conference paper 1993

document

Vapor phase manufacture of porous TiN deposits on/in porous supports. Vapor phase manufacture of materials

Dekker, J.P. (author), Schoonman, J. (author), Pratsinis, S. (author), Kodas, T.T. (author)

journal article 1994

document

Some observations on precipitation in a Al-Si-Cu-Mg alloy with Al2O3 particles

Bronsveld, P.M. (author), Starink, M.J. (author), De Hosson, J. (author), Van Mourik, P. (author)

conference paper 1994

document

Gas-phase synthesis of nano-structured semiconductors. Advanced materials and processing

Goossens, A. (author), Schoonman, J. (author), Yoshimura, M. (author)

journal article 1995

document

Trapping of nitrogen at the Fe-AlN precipitate interface studied by the positron Doppler broadening technique

Schut, H. (author), Van Veen, A. (author), Jorgensen, L.V. (author), Van der Zwaag, S. (author), Geerlofs, N. (author)

conference paper 1997

document

Voorstudie instrumentarium maatgevende afvoer

Markus, A.A. (author)

report 1999

document

Design of a magnesium removal process for an electrolytic zinc plant

Pepels, K.R.M. (author), Telalovic, S. (author), Toussaint, V.A. (author), Van Vegten, S. (author), Wichhart, M. (author)

Document(en) uit de collectie Chemische Procestechnologie

report 2002

document

Magnesium removal in the electrolytic zinc industry

Booster, J.L. (author)

Electrolytic zinc plants need to take measures to control the magnesium content in their process liquors, because the natural magnesium bleed does not balance the input from concentrates. Presently used methods are environmentally unfriendly (due to the production of large amounts of waste gypsum) or expensive. Therefore, an alternative process...

doctoral thesis 2003