Secondary phases characterization by SANS and XAS of an ODS ferritic steel after thermal aging at 873 K

An ODS steel with nominal composition Fe–14Cr–2W–0.4Ti-0.3Y2O3 (wt.%) was produced by mechanical alloying and compacted by hot isostatic pressing (HIP) followed by hot cross rolling (HCR). To check the effects of thermal aging at relevant temperatures of operation in fusion power plants, the alloy was thermally aged at 873 K for 2000 h. In this...

Spin-Printing of Liquid Crystal Polymer into Recyclable and Strong All-Fiber Materials

Fiber-reinforced polymers are widely used as lightweight materials in aircraft, automobiles, wind turbine blades, and sports products. Despite the beneficial weight reduction achieved in such applications, these composites often suffer from poor recyclability and limited geometries. 3D printing of liquid crystal polymers into complex-shaped...

Scalable bacterial production of moldable and recyclable biomineralized cellulose with tunable mechanical properties

Sustainable structural materials with excellent impact-resistance properties are urgently needed but challenging to produce, especially in a scalable fashion and with control over 3D shape. Here, we show that bacterial cellulose (BC) and bacterially precipitated calcium carbonate self-assemble into a layered structure reminiscent of tough...

Rationalising the Structural Material Choice Process for High Rise Buildings in the Netherlands

The goal of this thesis is to create a decision-making framework for the structural material choice for high rise buildings (between 70 m and 250 m) in the Netherlands. The main research question is: How is the structural material for a high rise building in the Netherlands chosen and how can this process become structured? Currently of the...

Crumpling-based soft metamaterials: The effects of sheet pore size and porosity

Crumpled-based materials are relatively easy to fabricate and show robust mechanical properties for practical applications, including meta-biomaterials design aimed for improved tissue regeneration. For such requests, however, the structure needs to be porous. We introduce a crumpled holey thin sheet as a robust bio-metamaterial and measure...

Accommodation of Plastic Deformation by Ultrasound-Induced Grain Rotation

Electron backscatter diffraction was used to investigate the softening effect in low-carbon steel [Fe-0.051C-0.002Si-0.224Mn-0.045Al (wt pct)] during tensile deformation with in situ ultrasonic treatment. A bimodal grain size distribution is observed with relatively small equiaxed grains with an average diameter of 10 ?m at the grain boundaries...

Improving reversible capacities of high-surface lithium insertion materials – the case of amorphous TiO2

Chemisorbed water and solvent molecules and their reactivity with components from the electrolyte in high-surface nano-structured electrodes remains a contributing factor toward capacity diminishment on cycling in lithium ion batteries due to the limit in maximum annealing temperature. Here, we report a marked improvement in the capacity...