Stop Criteria for Flexure for Proof Load Testing of Reinforced Concrete Structures

Existing bridges with large uncertainties can be assessed with a proof load test. In a proof load test, a load representative of the factored live load is applied to the bridge at the critical position. If the bridge can carry this load without distress, the proof load test shows experimentally that the bridge fulfills the requirements of the...

Optimizing Finite Element Models for Concrete Bridge Assessment With Proof Load Testing

Proof load testing of existing reinforced concrete bridges is becoming increasingly important as the current bridge stock is aging. In a proof load test, a load that corresponds to the factored live load is applied to a bridge structure, to directly demonstrate that a bridge fulfills the code requirements. To optimize the procedures used in...

Towards standardisation of proof load testing: pilot test on viaduct Zijlweg

Proof load tests of bridges can be very useful for structures with a lack of information, or for structures of which the effect of material degradation is difficult to assess. Contrary to diagnostic load testing, proof load testing is not well-defined in current standards in terms of required load and analysis of measurements. The risk...

Beam Experiments on Acceptance Criteria for Bridge Load Tests

Loading protocols and acceptance criteria are available in the literature for load tests on buildings. For bridges, proof load tests are interesting when crucial information about the structure is missing, or when the uncertainties about the structural response are large. The acceptance criteria can then be applied to evaluate if further loading...

Required proof load magnitude for probabilistic field assessment of viaduct De Beek

Proof load testing is part of the engineering practice, and can be particularly useful for the rating of existing bridges. This paper addresses how reliability-based concepts can be used in combination with proof load testing, and discusses how this approach differs from the current practice for proof load testing. Whereas the calculation...

State-of-the-art on load testing of concrete bridges

Load testing of bridges is a practice that is as old as their construction. In the past, load testing gave the traveling public a feeling that a newly opened bridge is safe. Nowadays, the bridge stock in many countries is aging, and load testing is used for the assessment of existing bridges. This paper aims at giving an overview of the current...

Development of recommendations for proof load testing of reinforced concrete slab bridges

As the bridge stock in the Netherlands and Europe is ageing, various methods to analyze existing bridges are being studied. Proof load testing of bridges is an option to experimentally demonstrate that a given bridge can carry the prescribed live loads. Based on extensive research on proof load testing of reinforced concrete slab bridges carried...

Proof load testing of the viaduct De Beek

Proof load testing can be a suitable method to show that a bridge can carry the required loads from the code without distress. This paper addresses the preparation, execution, and analysis of a proof load test on a four-span reinforced concrete solid slab bridge, viaduct de Beek. The bridge has one lane in each direction, but was restricted to a...

Probabilistic prediction of the failure mode of the Ruytenschildt Bridge

In the Netherlands, the shear capacity of a large number of existing reinforced concrete solid slab bridges is subject to discussion, as initial assessments indicated that their capacity was insufficient. In certain cases, the deterministic value of the moment capacity is larger than the deterministic value of the shear capacity. However, when...

Collapse test and moment capacity of the Ruytenschildt reinforced concrete slab bridge

A large number of existing reinforced concrete solid slab bridges in the Netherlands are found to be insufficient for shear upon assessment. However, research has shown additional sources of capacity in slab bridges, increasing their total capacity and possibly changing their failure mode. Previous testing was limited to half-scale slab...

Ruytenschildt Bridge: Field and laboratory testing

A large number of existing reinforced concrete solid slab bridges in the Netherlands are found to be insufficient for shear upon assessment. However, research has shown additional sources of capacity in slab bridges, increasing their total capacity. Previous testing was limited to half-scale slab specimens cast in the laboratory. To study the...