- document
-
Hols, Jesse (author)Performance-driven generative design has been commonly used in engineering applications. In addition to performance metrics, aesthetics play an important role in the acceptance of generatively designed forms. When generating these shapes using generative programs, it is not clear in advance what the outcome will be, and thereby what they will...master thesis 2024
- document
-
Garner, E. (author)Background: Despite over a century’s worth of technical improvements, the longterm survivability associated with orthopedic implants continues to fall short. In contrast to earlier designs, implant failure is no longer caused by structural failure of the implant itself. Rather, it results from the implant’s long-term detrimental effects on the...doctoral thesis 2024
- document
-
Algra, Hendrik Jaap (author)The predominant influence of geometry and tensile stress on the Q factor of nanomechanical resonators is a phenomenon commonly described as dissipation dilution. In recent years, a variety of studies has looked into maximizing this effect, resulting in an assortment of softly-clamped resonator designs. This paper proposes a methodology that uses...master thesis 2024
- document
-
van Bergen, Steven (author), Norte, R.A. (author), Aragon, A.M. (author)The computational analysis of nanophotonic devices is usually carried out via the standard finite element method (FEM). However, FEM requires meshes that are fitted to the devices’ boundaries, so making changes to the geometry (and thus the mesh) results in an inefficient process at best. Such an approach is therefore at odds when conducting...journal article 2024
- document
-
Munro, D.P. (author)This note communicates a simple modification of the optimality criteria (OC) design update—as found in well-known Matlab implementations of the classical topology design problem—to an update based on a quadratic program (QP) with a single linear constraint. This QP update is a special case of the dual of Falk, which in general accommodates...journal article 2024
- document
-
Zhai, X. (author), Wang, Weiming (author), Chen, Falai (author), Wu, J. (author)Recent years have seen a growing interest in topology optimization of functionally graded microstructures, characterized by an array of microstructures with varying volume fractions. However, microstructures optimized at slightly different volume fractions do not necessarily connect well when placed adjacently. Furthermore, optimization is...journal article 2024
- document
-
Pinskier, Josh (author), Wang, Xing (author), Liow, Lois (author), Xie, Yue (author), Kumar, Prabhat (author), Langelaar, Matthijs (author), Howard, David (author)Soft grippers are ideal for grasping delicate, deformable objects with complex geometries. Universal soft grippers have proven effective for grasping common objects, however complex objects or environments require bespoke gripper designs. Multi-material printing presents a vast design-space which, when coupled with an expressive computational...journal article 2024
- document
-
Kerkhove, Casper (author)The recent success of - and demand for - compliant mechanisms has increased rapidly within the micro-electromechanical systems-, aircraft-, spacecraft-, surgical-, and precision-instrument industries. Yet, even greater success may be achieved by overcoming the computational cost and instability of the mechanisms' design methodology. This...master thesis 2023
- document
-
Römer, Nol (author)As mechanisms become increasingly precise, so becomes the reduction of noise and vibration increasingly important. One method for eliminating vibrations in mechanisms is dynamic balancing. This method prevents vibrations from occurring by designing the mechanism such that the inertial forces and moments of all bodies in the mechanism cancel each...master thesis 2023
- document
-
Schaab, Helge Schaab (author)Conventional hydrostatic bearings are not suited to use on surfaces with changing curvature which limits their applicability. To improve on this, deformable hydrostatic bearings are currently being researched. The goal of this work is to develop hydrostatic bearings with a single fluid supply that work for sinusoidal counter surfaces. <br/><br/...master thesis 2023
- document
-
Schoenmaker, Eva (author)This thesis is part of a larger ongoing research project at the TU Delft regarding structural glass as a novel construction material. Here, the focus is directed towards the casting of glass to create complex free-form geometries. Thus far, only smaller components have been created, but a multitude of previous student work explored how the...master thesis 2023
- document
-
Lansu, Mike (author)The use of multi-axis additive manufacturing has enabled the possiblity to fabricate parts using curved layer deposition. Compared to the traditional deposition using planar layers of a fixed thickness, multiaxis additive manufacturing significantly increases the number of possible fabrication sequences. With the introduction of a time component...master thesis 2023
- document
-
DAS, MANABENDRA NATH (author)Additive manufacturing (AM) has revolutionized part manufacturing, offering unprecedented design freedom and the ability to fabricate intricate structures. Computational design methods like topology optimization (TO) effectively capitalize on AM's design freedom. However, manufacturability constraints must be considered to ensure reliable...master thesis 2023
- document
-
Molina Ramirez, Ines (author)Given the growing number of environmental and societal concerns we confront today, the idea of sustainability has gained importance. At the same time, new strategies for improving the performance of structures and systems have been developed due to developments in engineering and computational design. This research aims to generate a sustainable...master thesis 2023
- document
-
The Effect of a Topology Optimization based Generative Design tool on the Engineering Design ProcessVercoulen, Emma (author)In the engineering industry, all structural parts have to be designed as efficient and lightweight as possible. Traditionally, the design process has been carried out through manual design iterations, which can be time-consuming and require significant engineering expertise. Over the last decades however, several computational design techniques...master thesis 2023
- document
-
Bulstra, Kasper (author)The main problem in density-based two-fluid optimization is the fact that the two fluids often mix in optimal designs. Therefore, state-of-the-art two-fluid heat exchanger optimization includes non-mixing constraints. However, the current non-mixing constraints can only impose a constant wall-thickness between the two fluids. Depending on the...master thesis 2023
- document
-
Slebioda, Marek (author)Offshore wind turbines have seen a significant increase in size over the past decades. A critical consequence of this increase in size is a substantial increase in the torque transferred from the wind turbine rotor. This leads to the necessity of larger and heavier drivetrains to adhere to structural failure requirements and subsequently to...master thesis 2023
- document
-
Ranjan, R. (author)With the advent of Additive Manufacturing (AM) techniques, the design principle of `form follows function' no longer remains a utopian proposition. The unprecedented design freedom offered by AM is making it possible to conceptualize highly performant designs by efficiently leveraging geometrical complexity. The increase in design freedom...doctoral thesis 2023
- document
-
Krol, Robert (author)Silicon based power semiconductors have long been used as the standard in ‘semiconductor technology in power conversion applications’. Recent developments replaces the Silicon with Silicon Carbide as it results in superior performance of the power conversion applications. However, due to the increased performance, challenges...master thesis 2023
- document
-
Akbaba, Kaan (author)Designing structures that are more sustainable is a relevant topic within the construction industry. By choosing materials that have a low embodied energy value and optimizing the structures that can be constructed by these materials, one could potentially minimize the economical and environmental footprint of a structural design.<br/><br/>As...master thesis 2023