In-Plane Behaviour of Unreinforced Masonry Strengthened with a Structural Glass Window: A Proof of Concept

Innovative solutions for seismic-retrofitting existing structures are currently required, as often traditional strategies are expensive, non-reversible, highly invasive, and/or fail to address both serviceability and ultimate limit states together. The present paper describes a preliminary experimental campaign performed at TU Delft to...

Performance of unreinforced masonry strengthened with bed joint reinforced repointing

Bed joint reinforced repointing is a strengthening method often used in the Netherlands to counteract settlement damage. This strengthening technique consists of cutting a slot in the mortar joint and installing twisted steel bars embedded in a high-strength repair mortar. Due to the increase in seismic activities, triggered by gas extraction in...

Experimental investigation of the in-plane cyclic behaviour of calcium silicate brick masonry walls

The material and structural performance of calcium silicate (CS) brick masonry has received relatively little attention in the past, although this material is often used for the construction of low-rise buildings in Central and Northern Europe. Upon the occurrence of induced seismicity in the north of the Netherlands, an extensive testing...

Experimental and computational study of the influence of pre-damage patterns in unreinforced masonry crack propagation due to induced, repeated earthquakes

Induced seismicity in the north of the Netherlands has recently exposed unprepared, unreinforced masonry structures to considerable earthquake risk. While the ultimate-limit state capacity of the structures is vital to assess the individual’s risk, their behavior during more frequent, lighter earthquakes, leading to ‘lighter damage’, has shown...

A damaging block-based model for the analysis of the cyclic behaviour of full-scale masonry structures

In this paper, a damaging block-based model is proposed for the numerical analysis of the cyclic behaviour of full-scale masonry structures. Solid 3D finite elements governed by a plastic-damage constitutive law in tension and compression are used to model the blocks, while a cohesive-frictional contact-based formulation is developed to simulate...

A Comparative study on the evaluation of different testing techniques: Evaluating the mechanical properties of masonry

To accurately assess the performance of existing unreinforced masonry (URM) structures, the mechanical characteristics of masonry under compressive loading are required. The compression properties of existing URM can be evaluated through different methods, either performing destructive tests (DTs) or slightly destructive tests (SDTs). DTs can be...

Literature review on the assessment of masonry properties by tests on core samples

Starting point in this research is to find a quick and non-destructive method to characterize the mechanical properties of existing masonry. Tests on cylindrical cores have been recently introduced as a novel in-situ testing method to identify the properties of existing clay brick masonry. Currently, some researchers reported promising results,...