Searched for: subject%3A%22WASH%22
(1 - 20 of 43)

Pages

document
Alkemade, Selwin (author)
This paper addresses the urgent need to optimize the GreenCycl facilities energy utilization, by harnessing heat from the effluent of three thermal washing-disinfection machines into the preheating of cold clean water. Currently for every washing-disinfection cleaning program, 60 times a week, 105 liters of water with a temperature of 60 \degree...
master thesis 2023
document
Bogaerts, Charlie (author)
This study aims to quantify the aerodynamic behaviour of fixed pitch rotors with a diameter of 12.7 cm in axial descent, and its contribution to the attitude oscillations found for quadcopters under similar flight conditions. Wind tunnel tests are performed with an isolated rotor, as well as a complete quadcopter mounted inside a gimbal that...
master thesis 2023
document
van den Hoek, Anna (author)
To understand the functioning of a river system it is crucial to have information on the sediment transport. Estimates of long-term sediment fluxes in the Rhine at the German-Dutch border are required to understand the morphological evolution of the Dutch Rhine Delta. Especially information about the long-term flux of bed material load is of...
master thesis 2023
document
Temmerman, Sjors (author)
Tummers Food Processing Solutions is an internationally operating company based in the Netherlands, that sells factory lines for processing tuberous products like potatoes. Before being processed into various products, the incoming tuber batches are always washed and cleaned from waste particles like clods, stones and haulm. For this purpose...
master thesis 2022
document
Satriani, S. (author), Saffana Ilma, Izana (author), Daniel, D. (author)
This study provides an overview of water, sanitation, and hygiene (WASH) research trends in Indonesia from 1975 until April 2021. The systematic review compiled 272 articles related to the Sustainable Development Goals 6.1 and 6.2 in Indonesia, which were published in the Web of Science and Scopus databases. The results showed that the water...
journal article 2022
document
Rietveld, M.W.J. (author), Clemens, F.H.L.R. (author), Langeveld, J.G. (author)
Urban runoff remobilises solids and their associated pollutants from urban-built environments and transports them to drainage systems via gully pots. This study presents an extensive monitoring campaign on the solids loading to drainage systems, including 104 gully pots as sampling locations and lasting 2 years. The solids loading is modelled...
journal article 2022
document
Abunada, M.B.M. (author), Dhakal, N. (author), Andyar, William Z. (author), Ajok, Pamela (author), Smit, Herman (author), Ghaffour, Noreddine (author), Schippers, Jan C. (author), Kennedy, M.D. (author)
This study aimed to quantify the effect of membrane surface porosity on particulate fouling predicted by the MFI-UF method at constant flux. Firstly, the surface porosity of polyethersulfone UF membranes (5–100 kDa) was determined using ultra-high resolution SEM. Thereafter, the MFI-UF was measured using suspensions of polystyrene particles ...
journal article 2022
document
Stackmann, Till (author)
One of the key business models Gorenje andASKO have researched upon is a service model of circular washing machine under a pay per use (PPU) business model. PPU business models are currently mostly used within shared washing rooms, which is also the segment in which ASKO will enter withtheir first circular washing machines. However, even though...
master thesis 2021
document
van Nes, Gijs (author)
Many cities in Sub-Saharan Africa struggle to access reliable and adequate quantities of potable water for diverse water requirements. Under pressure of climatic change, urbanization and economic development, freshwater resources are becoming scarcer. These pressures combined with outdated infrastructure, pose a giant challenge to the Greater...
master thesis 2021
document
Steunenberg, Kirsten (author)
In order to live more sustainably on this planet, the world’s population needs to transform the current take-make dispose society towards a society with more maintainable consumption patterns and more sustainable business models. A way to achieve this, is a circular economy in which value is maintained within the product cycle, by sharing,...
master thesis 2021
document
Van den Berghe, K.B.J. (author), Verhagen, Teun (author)
Increasingly, space for remanufacturing is seen as the most valuable resource to achieve circular economy (CE) policy goals, in particular for cities. However, in many cities, industrial urban areas are increasingly subject of – mostly circular designed - residential redevelopment. The proposition of this paper is that these diminishing...
journal article 2021
document
Rietveld, M.W.J. (author), Clemens, F.H.L.R. (author), Langeveld, J.G. (author)
Runoff (re)mobilises solids and their associated pollutants from streets and transports them via gully pots to the drainage system. As the solids negatively impact the performance of the drainage systems, knowledge on the solids loading in terms of mass and composition is essential. However, monitoring data on the solids loading, in...
journal article 2021
document
van Dam, S.S. (author), Sleeswijk Visser, F. (author), Bakker, C.A. (author)
Designers play an important role in service transformation and the development of product-service systems by applying co-creation methods. This paper presents a case of how we applied co-creation in practice and the impact this has had on developing a circular product-service system. It details the method used in the co-creation process and...
journal article 2021
document
Froeling, Katie (author)
In 2019 over 670000 new washing machines(WMs) were purchased in the Netherlands (Statista, 2020). With a WM ownershiprate of 98%, the Dutch people have one of the highest WM ownership percentagesin the world (Laitala et al., 2018). In the traditional business model (BM)these WMs will be used, discarded and recycled. In order...
master thesis 2020
document
Khanpour, Milan (author), Meesters, Kenny (author), Paulus, D. (author)
With ongoing research, increased information sharing and knowledge exchange, humanitarian organizations have an increasing amount of evidence at their disposal to support their decisions. Nevertheless, effectively building decisions on the increasing amount of insights and information remains challenging. At the individual, organizational, and...
conference paper 2020
document
Djohan, Dennis (author), Machairas, Ilias (author), van Lienden, Kirsten (author), Prihesti Iswarani, Widya (author)
This research aims to identify the key stakeholders, explain factors that influence water, sanitation, and hygiene (WASH) behaviours, determine the chance of bacterial contamination in water, and hygiene and sanitary practises in East Sumba. The interview results show that DinKes (health agency), PAMSIMAS (rural water company), and the village...
student report 2019
document
Nahar, Nilesh (author)
Bundles is a Dutch startup that is working on developing circular propositions by offering products on a subscription model. Bundles already offer high-quality Miele washing machines on a “pay per wash” model to consumers. However, high lifecycle costs hinder the competitiveness of the business. This high cost is a result of the product (washing...
master thesis 2019
document
Gross, Shannon (author)
Policymakers who work in the public health sector may rely on the help of quantitative models to support their choice of control strategy against a particular infectious disease. While policymakers have a large number of decision support models to choose from, hardly any of these tools are used to design an intervention strategy that can work...
master thesis 2019
document
van Dam, S.S. (author), Bakker, C.A. (author), Hazenoot, Thomas (author), Mihelič, Aleš (author)
This paper presents the result of a co-creation and context mapping study amongst seventeen washing machines users. The users had widely varying experiences with products offered through alternative ownership models, including three who were active users of a washing machine with pay-per-use or monthly subscription model. Through the co-creation...
conference paper 2019
document
Zhao, Yihan (author)
Nowadays, the increasing populations and the higher demands of human’s life are creating a high pressure on the environment. Laundry as a routine for all the families, requires a large number of resources especially with regards to its water and energy consumption. With the innovation in both the business model and IoT technology, HOMIE is...
master thesis 2018
Searched for: subject%3A%22WASH%22
(1 - 20 of 43)

Pages