Pages
- 1
- 2
- document
-
Roetman Roetman, E.C. (author), Joustra, J.J. (author), Heideman, Geert (author), Balkenende, R. (author)Innovation is crucial to meet the circular economy goals for tire recycling. Devulcanization, an innovative recycling method of reprocessing tire rubber, offers a pathway towards achieving circular economy objectives. While previous research on devulcanization has primarily focused on technical aspects, this study shifts the focus towards...journal article 2024
- document
-
Bos, P. (author), Ritzen, L. (author), van Dam, S.S. (author), Balkenende, R. (author), Bakker, C.A. (author)Replacing fossil-based feedstock with renewable alternatives is a crucial step towards a circular economy. The bio-based plastics currently on the market are predominantly used in single-use applications, with remarkably limited uptake in durable products. This study explores the current state of the art of bio-based plastic use in durable...journal article 2024
- document
-
Honkoop, Margot (author), Albayrak, A. (author), Balkenende, R. (author), Hunfeld, Nicole (author), Diehl, J.C. (author)This research project, part of the Green Intensive Care Unit (ICU) initiative at the Erasmus University Medical Center (EMC), is focused on reducing the environmental impact of syringes at the ICU by designing solutions based on circular economy principles. Based on a Material Flow Analysis of the EMC ICU, syringes and their packaging have been...conference paper 2024
- document
- Balkenende, R. (author) book chapter 2023
- document
-
Ritzen, L. (author), Sprecher, B. (author), Bakker, C.A. (author), Balkenende, A.R. (author)Bio-based plastics are attracting increasing attention due to their perceived sustainability and circularity. While enabling circularity by using renewable feedstocks, they still contribute to plastic pollution. Furthermore, their rapidly growing market will cause bio-based plastics to constitute significant fractions of plastic waste,...review 2023
- document
-
Boorsma, Nina (author), Peck, David (author), Bakker, Tanya (author), Bakker, C.A. (author), Balkenende, R. (author)Remanufacturing offers an approach to extend product lifetime beyond its first use. After restoring products to original quality, they are reintroduced to the market. To make products more suited for this approach, and to increase resource-efficiency, design for remanufacturing can be incorporated for new product development. Academic...journal article 2022
- document
-
Dangal, S. (author), Faludi, Jeremy (author), Balkenende, R. (author)The Circular Economy Action Plan adopted by the European Commission aims to keep value in products as long as possible through developing product-specific requirements for durability and repairability. In this context, various scoring systems have been developed for scoring product repairability. This study assessed the objectivity and...journal article 2022
- document
-
Joustra, J.J. (author), Bakker, C.A. (author), Bessai, R. (author), Balkenende, R. (author)The design of composite products for a circular economy is challenging. Materials such as glass-fibre-reinforced plastics have long product lifetimes but are hard to recycle. For the effective reuse and recycling of products, parts, and materials, recovery strategies must be selected and implemented in the product design stage. This extends the...journal article 2022
- document
-
Bos, P. (author), Bakker, C.A. (author), Balkenende, R. (author), Sprecher, Benjamin (author)This design review evaluates the use of bio-based plastics in durable consumer products. The main question is: how does the use of bio-based plastics influence the product’s design, functionality, marketing & communication, and sustainability? Although higher material prices would lead one to expect that higher value applications would be...conference paper 2022
- document
-
Joustra, J.J. (author), Flipsen, Bas (author), Balkenende, R. (author)Composite materials are an attractive material choice as they enable lightweight, low-maintenance products with a long lifespan. Recycling these materials, however, remains a chal-lenge. Homogeneous material composition and the use of thermoset matrices complicate repro-cessing, and result in low-grade recyclate. This means that closing the...journal article 2021
- document
-
Joustra, J.J. (author), Flipsen, Bas (author), Balkenende, R. (author)Composite materials are an attractive material choice as they enable lightweight, low maintenance products with a long lifespan. But closing the loop for these materials in a Circular Economy (CE) is challenging, especially for thermoset composites. In a CE, products should be designed for minimal impact while preserving their environmental and...conference paper 2021
- document
-
Joustra, J.J. (author), Flipsen, Bas (author), Balkenende, R. (author)Composite materials offer many advantages during the use phase, but recovery at the end of a lifecycle remains a challenge. Structural reuse, where an end of life product is segmented into construction elements, may be a promising alternative. However, composites are often used in large, complex shaped products with optimised material...journal article 2021
- document
-
Pozo Arcos, B. (author), Dangal, S. (author), Bakker, C.A. (author), Faludi, Jeremy (author), Balkenende, R. (author)The process of fault diagnosis is an essential first step when repairing a product: it determines the condition of the parts and identifies the origin of failure. We report on how product users go through the process of fault diagnosis in consumer products and the influence of design features on this process. Two groups of 12 participants were...journal article 2021
- document
-
Ingemarsdotter, E.K. (author), Diener, Derek (author), Andersson, Simon (author), Jonasson, Christian (author), Mellquist, Ann Charlotte (author), Nyström, Thomas (author), Jamsin, E. (author), Balkenende, R. (author)The idea of leveraging the Internet of Things (IoT) to support strategies in line with the circular economy (CE) has been gaining traction in literature. However, previous work has predominantly focused on the opportunities that these technologies can bring, and few studies have critically assessed the environmental viability of the proposed...journal article 2021
- document
-
Joustra, J.J. (author), Flipsen, Bas (author), Balkenende, R. (author)Composite materials, in particular fibre reinforced polymers, present a challenge when reaching their end of life. Current recycling processes are unable to capture the high-end material quality, thus challenging (re)use of composite materials in a Circular Economy. Structurally reusing segmented parts of end-of-life products as construction...journal article 2021
- document
-
Sumter, Deborah (author), de Koning, J.I.J.C. (author), Bakker, C.A. (author), Balkenende, R. (author)In a recent study, we identified seven key circular competencies for design: (1) Design for Multiple Use Cycles, (2) Design for Recovery, (3) Circular Impact Assessment, (4) Circular Business Models, (5) Circular User Engagement, (6) Circular Economy Collaboration, and (7) Circular Economy Communication. These were derived from small‐scale...journal article 2021
- document
-
Ingemarsdotter, E.K. (author), Kambanou, Marianna Lena (author), Jamsin, E. (author), Sakao, Tomohiko (author), Balkenende, R. (author)Previous literature has highlighted many opportunities for digital technologies, such as the Internet of Things (IoT) and data analytics, to enable circular strategies, i.e., strategies which support the transition to a circular economy (CE). As one of the key circular strategies for which the digital opportunities are apparent, maintenance...journal article 2021
- document
-
Brown, P.D. (author), Von Daniels, C. (author), Bocken, N.M.P. (author), Balkenende, R. (author)Circular oriented innovation commonly requires collaboration. Yet, to date, circular research lacks empirical investigation into collaborative processes. Collaborative processes are, however, highly researched within strategic management literature, thus offering valuable insights. The purpose of this paper is to investigate, identify and...journal article 2021
- document
-
Brown, P.D. (author), Baldassarre, B.R. (author), Konietzko, J.C. (author), Bocken, N.M.P. (author), Balkenende, R. (author)Circular oriented innovation aims to address sustainability problems such as resource scarcity, pollution and climate change by (re)designing industrial products, processes, business models, and value network configurations. Although the literature identifies collaboration as crucial for circular oriented innovation—due to the complexity,...journal article 2021
- document
-
Sumter, Deborah (author), de Koning, J.I.J.C. (author), Bakker, C.A. (author), Balkenende, R. (author)This study addresses what competencies (knowledge, skills, and attitudes) designers need in order to successfully design products and services for a circular economy. Existing literature, though sparse, has identified a number of circular economy competencies for design. Yet, a coherent overview is lacking. To complement the competencies found...journal article 2020
Pages
- 1
- 2