In Situ Non-Destructive Stiffness Assessment of Fiber Reinforced Composite Plates Using Ultrasonic Guided Waves

The multimodal and dispersive character of ultrasonic guided waves (UGW) offers the potential for non-destructive evaluation of fiber-reinforced composite (FRC) materials. In this study, a methodology for in situ stiffness assessment of FRCs using UGWs is introduced. The proposed methodology involves a comparison between measured wave speeds of...

Quantitative Damage Monitoring of Filament Wound Composites by Using Machine Learning-Based Techniques

Composite structures in transportation industries have gained significant attention due to their unique characteristics, including high energy absorption. Non-destructive testing methods coupled with machine learning techniques offer valuable insights into failure mechanisms by analyzing basic parameters. In this study, damage monitoring...

Buckling assessment of GFRP and carbon fiber-reinforced plastic filament-wound tubes using an acoustic emission-based methodology

The aim of this research is to investigate the failure mechanisms of the filament-wound composite tubes under axial compressional loading by using an acoustic emission approach. First, the mechanical properties of ±45°C composite tubes were obtained experimentally. Then, failure due to the buckling phenomenon and crashworthiness...

Investigation of energy absorption capacity of 3D filament wound composite tubes: experimental evaluation, numerical simulation, and acoustic emission monitoring

By analyzing the failure mechanisms, crashworthiness characteristics of FW composite tubes subjected to two modes of progressive damage and catastrophic failure are investigated using acoustic emission technique and numerical method. The AE signals of ±45° composite tubes were classified using hierarchical and wavelet transform methods, and...

Investigating Organic Vapor Sensing Properties of Composite Carbon Nanotube-Zinc Oxide Nanowire

The low operating temperature of nanowire gas sensors along with their high surface-to-volume ratio are two factors that make gas sensors more practical. In this paper, the growth of ZnO nanowires on a vertically aligned CNT forest is reported. The utilized method for ZnO growth was a rapid microwave-assisted hydrothermal route, which...

Feasibility evaluation for development of composite propellers with embedded piezoelectric sensors

Marine propellers made of fibre-reinforced composites have demonstrated the potential to outperform metallic propellers in terms of efficiency and under-water noise radiation. For full realisation of this potential in a tailored design process with realistic constraints, accurate information on the hydrodynamic loads acting on composite...

Damage mechanism characterization of ±35° and ±55° FW composite tubes using acoustic emission method

The focus of this study is to investigate the mechanical properties, of ±35° and ±55° filament wound (FW) composite tubes under axial compression loading using the acoustic emission technique. For this purpose, material failure, crashworthiness characteristics, and the effect of each mechanism on the energy absorption capacity were studied...

Wave Propagation in Thin-walled Composite Structures: Application to Structural Health Monitoring

In order for the increased use of fiber-reinforced composite structures to be financially feasible, employment of reliable and economical systems to detect damage and evaluate structural integrity is necessary. This task has traditionally been performed using off-line non-destructive testing (NDT) techniques. Safety enhancement programs and cost...