Does carbon nanotube buckypaper affect mode-I and II interlaminar fracture toughness under quasi-static loading?

Carbon fiber reinforced polymer (CFRP) composites are widely used to produce structural components. However, their low interlaminar strength makes them susceptible to delamination, limiting structural applications. Aiming to solve this problem, this work proposes adding carbon nanotubes buckypaper (BP) into CFR thermoplastic composites as an...

Co-curing bonding of carbon fibre/epoxy composite joints with excellent structure integrity using carbon fibre/PEEK tapes

A novel co-curing process was proposed for the bonding of carbon fibre/epoxy composites by replacing traditional epoxy adhesives with carbon fibre/PEEK (CF/PEEK) tapes, with an attempt to improve the structure integrity. The lap-shear strengths, fatigue resistance and mode-I and mode-II fracture behaviour of the co-cured joints at 22 °C and...

Temperature dependency of the toughening capability of electrospun PA66 nanofibers for carbon/epoxy laminates

The present study evaluates the toughening capability of electrospun PA66 nanofibers for carbon/epoxy composite laminates subjected to mode II loading conditions at elevated temperatures. The Dynamic Mechanical Analysis (DMA) test showed that the glass transition temperature of the produced nanofibers is in a range of ∼60–80 °C. Accordingly,...

The fatigue failure study of repaired aluminum plates by composite patches using Acoustic Emission

The aim of this study is to investigate the failure of cracked aluminum plates repaired by one-side composite patches under fatigue loading using Acoustic Emission (AE) and fractography images. Rectangular specimens made of 6061 aluminum alloy with central through thickness pre-cracks were repaired using glass/epoxy laminated patches. The...

Effect of resin-rich bond line thickness and fibre migration on the toughness of unidirectional Carbon/PEEK joints

It is a common practice in fusion bonding of thermoplastic composites to add a matrix layer between the two substrates to be joined. The aim is to ensure proper wetting of the two parts. The effect of this additional matrix layer on the mechanical performance was studied by mode I fracture toughness measurements. The additional matrix was...

Fracture characteristics of carbon and aramid unidirectional composites in interlaminar shear and open hole tensile tests.

This investigation examined carbon/epoxy and aramide/epoxy composites in interlaminar shear and in open-hole tensile tests at 90 to the unidirectional fibre orientation. Epoxy resin was also tested under tension. Photomicroscopy and the S.E.M. were used to study the fracture surfaces. Wet tests were performed to investigate the influence of...