- document
-
Huang, H. (author)Concrete made with Portland cement has good behaviour under compressive stress, but it is weak in tension. Cracking caused by tension is a typical problem in concrete practice. High autogenous shrinkage at early ages is one of the causes of cracking, especially in high/ultra-high performance concrete. In that stage shrinkage is strongly related...doctoral thesis 2023
- document
-
van der Starre, Thom (author)Hall spars, a leading innovator in the composite mast-building industry with a long history of successful projects, provided a challenge which is the inspiration of this thesis. This thesis aims to contribute to the challenge: Joining techniques for the internal bonding of carbon fibre-reinforced polymer components into carbon fibre-reinforced...master thesis 2023
- document
-
Raghavan, Arjun (author)In this research, the effect of curing with different types of current, current densities/voltage intensity on mortar is studied. The main objective is to explore the outcomes of electric curing on the setting time of CEM-I mortar. For achieving the main objective, an electrical curing setup is designed to accommodate curing with direct current,...master thesis 2023
- document
-
Chi, Lin (author), Lu, Shuang (author), Li, Z. (author), Huang, Chendong (author), Jiang, Hui (author), Peng, Bin (author)As an industrial by-product containing pozzolanic components, recycled ferronickel slag (FNS) has the potential to be supplementary cementitious materials (SCMs) to reduce the massive carbon footprint of the cement industry, however, the main limitation of ferronickel slag as SCMs is the low hydration rate at an early age. In this study, the...journal article 2023
- document
-
Quan, D. (author), Ma, Yannan (author), Yue, Dongsheng (author), Liu, Jiaming (author), Xing, Jun (author), Zhang, Mingming (author), Alderliesten, R.C. (author), Zhao, Guoqun (author)In this study, an aerospace thermosetting composite was co-curing joined by Polyether-ether-ketone (PEEK) and Polyethylenimine (PEI) films, with an aim of developing advanced composite joints. The semi-crystalline PEEK films were surface activated upon a UV-irradiation technique to obtain a strong film–composite interface, while the amorphous...journal article 2023
- document
-
Ogugua, C.J. (author), Anton, S.V. (author), Tripathi, A.P. (author), Larrabeiti, Miguel Dominguez (author), van Hees, S.O. (author), Sinke, J. (author), Dransfeld, C.A. (author)Autoclave curing is one of the most energy consuming processes in manufacturing carbon fibre reinforced polymers. In order to improve the energy efficiency, one needs to understand energy usage in an autoclave and factors that influence it. This work presents two thermodynamic based models for estimating energy consumption in an autoclave....journal article 2023
- document
-
Liu, C. (author), Liang, X. (author), Chen, Y. (author), Li, Z. (author), Ye, G. (author)In this study, the impacts of tap water immersion on the pore solution, phase assemblages, gel chemistry and structure, and pore structure of alkali-activated slag (AAS) pastes were studied. AAS degrades under such condition and the potential mechanisms can be concluded as lower reaction rates, gel decomposition and carbonation. The leaching...journal article 2023
- document
-
Flessati, L. (author), Vecchia, Gabriele Della (author), Musso, Guido (author)Cement-bentonite cut-off walls are commonly employed in geoenvironmental applications to limit ground water flow and pollutant transport. The wide diffusion of this artificial material in the current practice is not only due to its low permeability, but also to its simplicity of use. In this paper, experimental evidences about the role of...journal article 2023
- document
-
Yang, Xinkui (author), Wu, Shaopeng (author), Xu, S. (author), Chen, B. (author), Chen, Dongyu (author), Wang, Fusong (author), Jiang, Jian (author), Fan, Lulu (author), Tu, Liangliang (author)Aimed to address the low utilization rate of steel slag (SS) and its challenge in resource utilization in China, this study developed ternary geopolymers made by high-content (50%) SS together with fly ash (FA) and granulated blast furnace slag (GBFS). The effects of GBFS content (0–40%) and curing methods (water curing, standard curing,...journal article 2023
- document
-
Emeis, Ruben (author)As part of the Dutch sustainable landfill project iDS, two compartments of the Dutch landfill Wieringermeer have been treated by in-situ aeration since 2017. The chosen method of aeration is over-extraction, where suction pressure is created causing ambient air to intrude into the landfill. Aeration induces enhanced settlement due to the...master thesis 2022
- document
-
Chen, Y. (author), Chang, Z. (author), He, S. (author), Copuroglu, Oguzhan (author), Šavija, B. (author), Schlangen, E. (author)A good bond between the layers of 3D printed cementitious materials is a prerequisite for having high structural rigidity for the printed elements. However, the influence of printing process on an interlayer bond is still not well understood. This study investigates the influence of curing methods (i.e., air curing, plastic film covering, wet...journal article 2022
- document
-
Subramanian, N. (author), Bisagni, C. (author)The effectiveness of carbonaceous nanoparticles in arresting and delaying damage in nanocomposites has been attributed to multiscale toughening mechanisms. To explore their application in joined interfaces of composites, this study investigates the use of carbon nanotube (CNT) interleaved films for co-cured joining of composite parts and their...conference paper 2022
- document
-
Quan, D. (author), Farooq, U. (author), Zhao, Guoqun (author), Dransfeld, C.A. (author), Alderliesten, R.C. (author)Carbon fibre/epoxy composite joints were assembled with Poly-etherether-ketone (PEEK) and Poly-ethylenimine (PEI) films using a co-curing process to prepare single-lap joint specimens. The joints were tested under quasi-static loading conditions at 22 °C and 130 °C and a fatigue loading condition. The experimental results demonstrated better...journal article 2022
- document
-
Andrade, Carmen (author), De Belie, Nele (author), Ducman, Vilma (author), Frederickx, Lander (author), Lothenbach, Barbara (author), Medina Martinez, César (author), Vollpracht, Anya (author), Wu, B. (author), Gruyaert, Elke (author)Many (inter)national standards exist to evaluate the resistance of mortar and concrete to carbonation. When a carbonation coefficient is used for performance comparison of mixtures or service life prediction, the applied boundary conditions during curing, preconditioning and carbonation play a crucial role, specifically when using latent...journal article 2022
- document
-
Jing, R. (author), Apostolidis, P. (author), Liu, X. (author)In this study, a series of viscosity tests were performed to investigate various conditions, i.e. temperature, shear rate and dilution level, on the curing behavior of epoxy bitumen. The results show that curing rate of epoxy bitumen increased with temperature; high shear rate would interfere the formation of crosslinks in epoxy bitumen,...journal article 2022
- document
-
Fazzi, L. (author), Struzziero, G. (author), Dransfeld, C.A. (author), Groves, R.M. (author)The unique sensing features of the tilted Fibre Bragg Grating (TFBG) as a single three-parameter optical sensor are demonstrated in this work, to monitor the manufacturing process of composite materials produced using Vacuum Assisted Resin Transfer Moulding (VARTM) process. Each TFBG sensor can measure simultaneously and separately strain,...journal article 2022
- document
-
Liu, C. (author), Yang, Lu (author), Li, Z. (author), Nie, Shuai (author), Hu, Chuanlin (author), Wang, Fazhou (author)Due to the satisfactory property and high productivity, heat-cured concretes have been widely used in engineering practice. However, heat curing process also brings some drawbacks that are detrimental to the long-term property of this material. To address this issue, lightweight fine aggregate (LWFA) was employed to provide internal curing ...journal article 2022
- document
-
Quan, D. (author), Zhao, Guoqun (author), Scarselli, Gennaro (author), Alderliesten, R.C. (author)A novel co-curing process was proposed for the bonding of carbon fibre/epoxy composites by replacing traditional epoxy adhesives with carbon fibre/PEEK (CF/PEEK) tapes, with an attempt to improve the structure integrity. The lap-shear strengths, fatigue resistance and mode-I and mode-II fracture behaviour of the co-cured joints at 22 °C and...journal article 2022
- document
-
Robertson, L.A. (author)When Antoni van Leeuwenhoek began his work with microscopes in the late 17th century, western medicine was mostly based on the work of a Roman doctor called Galen (129-199 ad), theological interpretation, superstition, and folk remedies. During modern discussions of Van Leeuwenhoek's work, a common question from listeners is why it took so...journal article 2022
- document
-
Zaaijer, Floris (author)Mechanical air entrapment, void compression and void dissolution are the main mechanisms behind void formation in liquid composite molding. Mechanical air entrapment is induced by the highly non-uniform geometry at the meso- and micro-scale and the heterogeneous properties of the reinforcing material. This results in differences in the velocity...master thesis 2021