Searched for: subject%3A%22drops%22
(1 - 20 of 84)

Pages

document
Czél, László (author)
The thesis aimed to characterize the effects of manufacturing-induced defects, particularly gaps in variable stiffness laminates. The primary focus centered on designing a specimen capable of accurately characterizing gap effects. A refined, element-level specimen design featuring a controlled gauge zone was developed, based on pre-defined...
master thesis 2024
document
Gatidis, C. (author)
Precipitation is a profoundly important meteorological process and a crucial component of the water cycle. Thus, the continuous and reliable monitoring of precipitation at global scale is fundamental for scientific sectors such as numerical weather prediction and hydrology. However, accurately estimating precipitation, its type and intensity at...
doctoral thesis 2024
document
Cruciata, Giorgio (author), Cruciata, Luca (author), Lo Presti, Liliana (author), van Gemert, J.C. (author), La Cascia, Marco (author)
This paper proposes a new method to improve the training efficiency of deep convolutional neural networks. During training, the method evaluates scores to measure how much each layer’s parameters change and whether the layer will continue learning or not. Based on these scores, the network is scaled down such that the number of parameters to be...
journal article 2024
document
Haayen, Bas (author)
Balanced armature receivers are electroacoustic transducers that are mostly integrated in hearing aids or pro audio products. The balanced armature receiver is a key component for hearing aids as it converts the processed electrical signal into sound waves. Failure of the balanced armature receiver are problematic for the end user. The receivers...
master thesis 2023
document
Wu, Pansy (author)
Traffic congestion is a challenge that frequently emerges due to changes in the roadways such as tunnels and sags, causing capacity reduction. The capacity drop phenomenon exacerbates traffic congestion, due to decreased queue discharge rates. Among the strategies employed for traffic management, Variable Speed Limit (VSL) control is a common...
master thesis 2023
document
van den Brink, Ilze (author)
This thesis contributes to the research of a complementary Truck Arrival Management system in order to increase the efficiency of the Liquid Bulk Terminal as a system in a global intermodal supply chain. Nowadays, terminals often suffer from congestion, despite the use of a Truck Arrival Management system. A Truck Arrival Management system...
master thesis 2023
document
Luo, Maoyi (author), Wang, Hang (author), Zheng, Xiaohui (author), Wüthrich, D. (author), Bai, Ruidi (author), Liu, Shanjun (author)
In high dam construction projects in China, stilling basin design with an abrupt bottom drop is sometimes introduced to reduce the bottom velocity and pressure loads by generating A-type hydraulic jumps. Although the stilling basin design is not new, A-type hydraulic jumps have not been studied taking into account the air entrainment and...
journal article 2023
document
Toa, X. (author), Shen, Yunwei (author), Wang, Bo (author), Infante Ferreira, C.A. (author)
High concentration NH<sub>3</sub>/H<sub>2</sub>O is suitable for Kalina cycles used for the recovery of low grade heat. Plate heat exchangers (PHEs) are compact and reduce the charge of working fluid. This paper investigates the condensation of NH<sub>3</sub>/H<sub>2</sub>O with NH<sub>3</sub> mass concentrations of 80%-96%. The vapor and...
journal article 2023
document
Gao, Y. (author), Liu, X. (author), Ren, S. (author), Li, Yuanyuan (author), Zhang, Yuqing (author)
Surface energy is a key material property and can work as a crucial parameter in various mechanical models to predict the moisture sensitivity and fatigue damage of asphalt mixtures. The calculated surface energy values of the aggregate minerals strongly depend on their surface roughness. Therefore, it is very relevant for accurate...
journal article 2023
document
Shikh Anuar, Fadhilah (author), Mustapha, Khairul Azhar (author), Sa'at, Fatimah Al Zahrah Mohd (author), Zini, Nurul Hilwa Mohd (author), Tokit, Ernie Mat (author), Narasimmanaidu, Satishwara Rao (author), Hooman, K. (author)
In this study, the microstructure of open-cell metal foam was generated and reconstructed, to produce a new generation of open-cell foam, which is called 3D printed open-cell foam. At the current stage of research, nylon powder and plastic acid are utilized as the materials for two different 3D printing technologies: Selective Laser Sintering...
journal article 2023
document
van Kuijk, J.J.A. (author)
Fatigue crack growth in metals has been studied intensively for more than half a century. This research field has been closely connected to the engineering industry throughout history. It is therefore no surprise that the main focus has mostly been on developing better prediction models rather than on understanding the phenomenon of fatigue...
doctoral thesis 2022
document
van den Brule, Yannick (author)
The knowledge of the raindrop size distribution is key for characterizing precipitation. It is however still a challenge to retrieve it with radars. Several polarimetric and spectral techniques are proposed for cm-wavelength radars (weather radars). What about the mm-wavelength radars (cloud radars), which have a better spatial and time...
master thesis 2022
document
Chanquia, Santiago Nahuel (author), Benfeldt, Frederik Vig (author), Petrovai, Noémi (author), Santner, Paul (author), Hollmann, F. (author), Eser, Bekir Engin (author), Kara, Selin (author)
Since its discovery in 2017, the fatty acid decarboxylase (FAP) photoenzyme has been the focus of extensive research, given its ability to convert fatty acids into alka(e)nes using merely visible blue light. Unfortunately, there are still some drawbacks that limit the applicability of this biocatalyst, such as poor solubility of the...
journal article 2022
document
Maričić, Marko (author)
Ride-pooling is a key concept for the future of human mobility and vital in the roll-out of Mobility-as-a-Service (MaaS). Pooling allows individuals to travel at a reduced fare (when comparing to a private alternative) due to the reduction in operating costs as the usage of the vehicles is increased; essentially, the main intentions of pooling...
master thesis 2021
document
de Jong, Maarten (author)
The volume and density of geospatial data is constantly increasing as newer acquisition techniques are developed to create higher-resolution datasets and more countries are creating country-wide datasets such as point clouds. However, methods to deal with this increase in the amount of data are lagging behind and the developments in computer...
master thesis 2021
document
Combe, Christopher (author)
The global climate agreement signed in Paris in 2015 sets the goal of limiting global warming, which is essential of saving the planet for future generations. The energy transition from a fossil-fuel living to a sustainable society depends on the technological development of using the renewable energy sources on earth. Wind and solar are common...
master thesis 2021
document
van Loon, Tom (author)
The aim of this study is to analyse the influence of ply drop-off regions and related parameters on the VARTM cure-induced residual stress generation and related distortions within thick thermoset composites. These parameters include the resin pocket material properties and geometry, ply orientations and cure cycle parameters. By means of a...
master thesis 2021
document
de Swart, Sebas (author)
In recent years, the amount of traffic on the highways has increased continuously and in particular freight traffic. Despite solutions to maximize roadway capacity, the drop of capacity after congestions sets in, remains an active field of study. The influence of freight traffic on traffic flow has received little attention, especially regarding...
master thesis 2021
document
Tao, Xuan (author), Infante Ferreira, C.A. (author)
High concentration NH3/H2O is suitable for Kalina cycles used for the recovery of low grade heat. Plate heat exchangers (PHEs) are compact and reduce the charge of working fluid. This work investigates the absorption of NH3/H2O in a PHE, which has a weight concentration of 96%. Being different from normal absorption systems, the concentration...
conference paper 2021
document
Santner, Paul (author), Szabó, László Krisztián (author), Chanquia, Santiago Nahuel (author), Merrild, Aske Høj (author), Hollmann, F. (author), Kara, S. (author), Eser, Bekir Engin (author)
Fatty acid photodecarboxylase (FAP) is one of the few photoenzymes in nature. The ability of FAP to convert fatty acids into alka(e)nes without the need for reducing equivalents put this enzyme into spotlight for biocatalytic applications. Although it has been discovered only a few years ago, many studies already emerged demonstrating its...
journal article 2021
Searched for: subject%3A%22drops%22
(1 - 20 of 84)

Pages