Searched for: subject%3A%22fatigue%255C+%255C%2528materials%255C%2529%22
(1 - 20 of 27)

Pages

List view
Grid view
document
Wanhill, R.J.H. (author)
This paper reviews currently available information on corrosion and fatigue in aircraft as a background to discussing the assessment of corrosion and fatigue damage. The main topics are: - aircraft operating environments and loads - corrosion - fatigue - corrosion and fatigue - corrosion and fatigue damage assessment. Aircraft structures are...
report 1995
document
Wanhill, R.J.H. (author)
This report reviews currently available information on corrosion and fatigue in aircraft as a background to discussing the assessment of corrosion and fatigue damage. The main topics are: * aircraft operating environments and loads * corrosion * fatigue * corrosion and fatigue * corrosion and fatigue damage assessment. Aircraft structures are...
report 1994
document
Wanhill, R.J.H. (author)
This report contains the overhead sheets of a short course on fatigue and fracture of aerospace aluminium alloys, plus an annex in the form of a review paper.
report 1994
document
Oldersma, A. (author)
Composite materials with more than one type of fiber in one matrix are known as hybrid composites. In this work the fatigue behaviour of composite materials is discussed and the behaviour of hybrid composites is related to simple (single-fiber) composites. The properties and the behaviour of hybrid composites can mostly be explained...
report 1991
document
de Jonge, J.B. (author)
Paper presented at the 17th ICAS Congress, Stockholm, September 1990. The actual service load experience of aircraft may differ appreciably from design assumptions. The necessity to monitor service loads is generally recognized now for military aircraft. This paper starts with a general review of the overall life management procedure commonly...
report 1990
document
Lameris, J. (author)
In the full scale durability and damage tolerance tests of composite aircraft structures, the US and European certification requirements demand among other things that the number of cycles applied are statistically significant and that the influence of the environment has been taken into account. Several certification methods are described which...
report 1990
document
Wanhill, R.J.H. (author), Schra, L. (author)
Constant amplitude low stress Intensity fatigue crack growth for 2024-T3 and 7475-T761 aluminium alloys In laboratory air, sump tank water and synthetic seawater was Investigated. Corrosion fatigue crack grouwt retardation and arrest occurred In both sump tank water and synthetic seawater, resulting In higher AKth values than In air. Crack...
report 1987
document
Vlieger, H. (author)
Some consequences of application of the current damage tolerance airworthiness requirements for transport aircraft in designing stiffened-skin structures to be safe under all operational load conditions are discussed. Compliance with these requirements may be shown by analysis supported by test evidence. To provide the designer with analytical...
report 1986
document
de Jonge, J.B. (author)
The present course book has been prepared as lecture notes for a summer course given at the Technical University of Bandung (ITB) in the summer of 1984. This course took place within the framework of the TTA-79 Technical Assistance Project as agreed between the Governments of Indonesia and the Netherlands. The subjects of the course are listed...
report 1984
document
Wanhill, R.J.H. (author), Jongebreur, A.A. (author), Morgan, E. (author), Moolhuijsen, E.J. (author)
Flight simulation fatigue crack propagation tests on single and double element lugs made from 2024-T351 and TOT5-TT351 aluminium alloys and Ti-6AJ.-UV titanium alloy were carried out. Initial damage was a throughthickness notch at one side of each hole in one element. Results showed that crack propagation lives for double element lugs were much...
report 1981
document
Lof, C.J. (author)
An application of linear elastic fracture mechanics to 3-dimensional crack growth prediction was developed in two phases. In the first phase finite element techniques for accurate stress intensity (S.I.) calculation were evaluated and the Virtual Crack Extension (V.C.E.)-method was selected for further work. In the second phase the process of...
report 1981
document
Wanhill, R.J.H. (author)
Flight simulation fatigue crack propagation tests on 202U-T3 and 7475-T761 aluminum alloy sheet were carried out using a gust spectrum representative of the load history of an under wing skin in a transport aircraft. The investigation included tests at several design stress levels and in environments of laboratory air and air plus water spray....
report 1980
document
de Koning, A.U. (author)
In the present report a simple analytical model for the "behaviour of a centrally cracked strip is proposed. Formulae for computation of compliance, crack opening displacement and effective crack extension force are derived. The model is based on the classical solution for a crack infinite sheet under uniaxial tension. The effect of finite...
report 1979
document
Schijve, J. (author)
Paper presented at the 16th ICAP Conference, Brussels, 14 and 15 May 1979.
report 1979
document
de Graaf, E.A.B. (author), de Rijk, P. (author)
The present report describes how fatigue cracks were produced in 102 specimens. After cracking these specimens were inspected non-destructively by means of eddy currents, ultrasonics. X-rays and penetrants, and the indications were recorded. Successively the specimens were exposed to corrosion whereafter the inspections were repeated. Upon...
report 1978
document
Wanhill, R.J.H. (author)
Flight simulation fatigue crack propagation tests with gust spectrum loading were carried out on 2024-T3/carbon-epoxy, 7475-T76l/carbon-epoxy and Ti-6Al-4V/carbon-epoxy laminates with nominal weight savings of -30% as compared to equivalent 2024-T3 panels. The performance of the 2024-T3/carbon-epoxy laminates was much superior to those of the...
report 1978
document
de Jonge, J.B. (author), Nederveen, A. (author), Tromp, P.J. (author)
Fatigue tests under flight simulation loading were done on simple notched 2024-T3 Alclad sheet specimens. Reduction of the gust load amplitudes resulted in an increase of crack initiation life but hardly influenced crack propagation. Reduction of the overall stress level increased both initiation and crack propagation life. The observed...
report 1978
document
Wanhill, R.J.H. (author)
report 1978
document
Wanhill, R.J.H. (author), Döker, H. (author)
report 1977
document
Wanhill, R.J.H. (author)
Plight simulation fatigue crack propagation tests with gust spectrum loading were carried out on 2024-T3/carbon-epoxy, 7475-T761/carbon-epoxy and Ti-6Al-4V/carbon-epoxy laminates with nominal weight savings of 30% as compared to equivalent 2024-T3 panels. The performance of the 2024-T3/ carbon-epoxy laminates was much superior to those of the...
report 1977
Searched for: subject%3A%22fatigue%255C+%255C%2528materials%255C%2529%22
(1 - 20 of 27)

Pages

List view
Grid view