Advancements and insights in thermal and water management of proton exchange membrane fuel cells: Challenges and prospects

In response to the growing global demand for clean and sustainable energy solutions, proton exchange membrane fuel cells (PEMFCs) have emerged as vital components in diverse decarbonization strategies. Despite their increasing importance, a comprehensive synthesis of recent advancements, challenges, and future prospects in thermal and water...

Design of High-frequency Fast-rise Pulse Modulators for Lifetime Testing of Dielectrics

Penetration of power electronics in the grid has produced a new species of stresses, characterized by fast-rising pulsed waveforms with microsecond rise times repeating at several tens of kilohertz. Analyzing their impact on existing and future insulation systems requires pulse modulators, most often with pulse transformers (PTs), to perform...

Common DC-Link Multilevel Converters: Topologies, Control and Industrial Applications

Multilevel converters (MLCs) are widely recognized for their exceptional benefits and have emerged as the preferred choice for medium- and high-power/voltage applications. Their usage has also been extended to low-power applications to overcome issues associated with high switching frequencies and electromagnetic interference (EMI) commonly...

Design of a Highly Efficient 20 kW Inductive Power Transfer System with Improved Misalignment Performance

Due to the urgent desire for a fast, convenient, and efficient battery charging technology for electric vehicle (EV) users, extensive research has been conducted into the design of high-power inductive power transfer (IPT) systems. However, there are few studies that formulate the design as a multiobjective optimization (MOO) research...

Long-Term Temperature-Dependent Degradation of 175 W Chip-on-Board LED Modules

We report on the degradation dynamics and mechanisms of the commercially available chip-on-board (COB) high-power light-emitting diode (LED) modules with an electrical power of 175 W. Due to the associated thermal load, the temperature dependence of the aging processes is additionally analyzed within the scope of this work. The aging tests...

High-Power Digital Transmitters for Wireless Infrastructure Applications (A Feasibility Study)

Fully digital transmitters (DTXs) have the potential of replacing analog-intensive transmitter (TX) line-ups in future massive multiple-input and multiple-output (mMIMO) systems since they hold the promise of higher system integration level and energy efficiency. DTX operation so far has been limited to low RF output powers. This article...

Prescribed-performance tracking for high-power nonlinear dynamics with time-varying unknown control coefficients

Prescribed-performance control (PPC) for high-power dynamics with time-varying unknown control coefficients requires to address two open problems: (a) given a Nussbaum function, which properties hold for the power of the Nussbaum function? (b) to avoid high gains, how to design a switching gain that increases only when the tracking error is...

First demonstration of l-band high-power limiter with gan schottky barrier diodes (Sbds) based on steep-mesa technology

Gallium nitride (GaN) has attracted increased attention because of superior material properties, such as high electron saturation velocity and high electrical field strength, which are promising for high-power microwave applications. We report on a high-performance vertical GaN-based Schottky barrier diode (SBD) and its demonstration in a...

An Ultra High-Frequency 8-Channel Neurostimulator Circuit with 68% Peak Power Efficiency

In order to recruit neurons in excitable tissue, constant current neural stimulators are commonly used. Recently, ultra high-frequency (UHF) stimulation has been proposed and proven to have the same efficacy as constant-current stimulation. UHF stimulation uses a fundamentally different way of activating the tissue: each stimulation phase is...

Suitable Submodule Switch Rating for Medium Voltage Modular Multilevel Converter Design

An important step in Voltage-Source Modular Multilevel Converter (MMC) design is the selection of adequate semiconductor blocking voltage class. This paper highlights that particularly for grid connected medium voltage applications, the choice of suitable switch blocking voltage class is not so straightforward. The market available switch...

In-volume heating using high-power laser diodes

High-power lasers are useful instruments suitable for applications in various fields; the most common industrial applications include cutting and welding. We propose a new application of high-power laser diodes as in-bulk heating source for food industry. Current heating processes use surface heating with different approaches to make the heat...

Mixed-signal instrumentation for large-signal device characterization and modelling

This thesis concentrates on the development of advanced large-signal measurement and characterization tools to support technology development, model extraction and validation, and power amplifier (PA) designs that address the newly introduced third and fourth generation (3G and 4G) wideband communication standards. By exploiting an innovative...

Electronic DC transformer with high power density

This thesis is concerned with the possibilities of increasing the power density of high-power dc-dc converters with galvanic isolation. Three cornerstones for reaching high power densities are identified as: size reduction of passive components, reduction of losses particularly in active components and thermal management. In addition to the...

LEDs for fluorescence microscopy

Traditional light sources for fluorescence microscopy have been mercury lamps, xenon lamps, and lasers. These sources have been essential in the development of fluorescence microscopy but each can have serious disadvantages: lack of near monochromaticity, heat generation, cost, lifetime of the light source, and possible distortions due to...