Searched for: subject%3A%22lifting%22
(1 - 20 of 170)

Pages

document
Koop, Jefta (author)
This study investigated the effects of lifting and carrying activities on ambulatory blood pressure (BP) responses in healthy adults. Participants performed simulated infant carrying tasks with different weight loads (0kg, 5kg and 10kg) using two lifting techniques (stoop and flat). Continuous BP was measured using the Finapres NOVA ambulatory...
master thesis 2024
document
Hemelaar, Senne (author)
While the assumption of incompressible flow has been the prevailing standard for numerical simulations of wind turbine aerodynamics, the limit of this assumption is approached as the industry progresses towards increasingly higher operational tip speeds. This thesis explores the implications of compressibility and transonic flow phenomena,...
master thesis 2024
document
den Butter, Robbert (author)
Background: Bilateral tubal ligation (BTL) is the most common method of contraception worldwide because it is safe and effective. However, its accessibility remains unequal among women in rural India, in part due to a lack of laparoscopic equipment. Rural hospitals therefore resort to gas insufflation-less laparoscopic surgery (GILLS) because it...
master thesis 2024
document
Eftekhar, Shadab (author)
The Flying-V, a novel aircraft design developed at Delft University of Technology, presents a revolutionary flying wing transport aircraft with a remarkable 20% reduction in energy consumption compared to traditional twin-aisle planes. <br/>This thesis project delves into the study of optimizing the Flying-V's landing performance, emphasizing...
master thesis 2024
document
Fidalgo Domingos, D.A. (author), Wellens, P.R. (author), van Wingerden, J.W. (author)
As a result of more stable wind conditions and the depletion of near-shore locations, wind farms are moving farther offshore into deeper waters, challenging the current limits of offshore heavy-lift operations. This paper presents and verifies a novel frequency-domain framework to perform extensive site-specific analysis, of floating...
journal article 2024
document
Nouri, Amir (author), Zinatizadeh, Ali Akbar (author), Zinadini, Sirus (author), van Loosdrecht, Mark C.M. (author)
This study focuses on the development of an air-lift bio-electrochemical reactor (ALBER) with a continuous feeding regime. The objective is to enhance nitrogen removal from synthetic wastewater with a low carbon-to-nitrogen (C/N) ratio. The chemical oxygen demand (COD) and total nitrogen (TN) of the influent wastewater were 500 and 200 mg/L,...
journal article 2024
document
Plijter, Jurrien (author)
This thesis investigates the aerodynamics of a propeller-wing-flap system, spurred by the growing interest in propeller-driven aircraft and the potential introduction of distributed electric propulsion. The research focuses on the complex flowfield involving the interaction of the propeller slipstream with the main wing and flap at high-lift...
master thesis 2023
document
Şeremet, Sorin (author)
A 3D panel method code, named AWSM3D, is developed as an extension to the AeroModule aerodynamic software suite of TNO which includes a Blade Element Momentum theory (BEM) and a Lifting Line (LL) code. The underlying panel code method is presented along with a gradual process of simulation validation culminating in validating the code against...
master thesis 2023
document
Eerden, Koen (author)
This MSc thesis presents an investigation into motion control systems aimed at reducing swing motion of a lifting load during offshore heavy lifting operations. Two distinct models are developed for this objective. Subsequently, an analysis is done to assess the impact of various control aspects.<br/><br/>First, an assessment of the offshore...
master thesis 2023
document
Koetzier, Daan (author)
Floating offshore wind turbines offer a means to access wind resources in waters that are too deep for bottom-fixed offshore wind turbines. To operate a floating wind farm, it must be possible to perform maintenance on the turbines. A critical maintenance aspect is the exchange of a major component such as a blade. It involves a lift of a large...
master thesis 2023
document
Berkouwer, Laurens (author)
For the installation of suction pile jackets, a new installation method initiated by SPT Offshore could extend the allowable size for suction pile jackets used as foundations for offshore wind turbines. This method involves installing the suction piles separately from the jacket frame. First, the suction piles are installed on the seabed. Then,...
master thesis 2023
document
Veršnik, Ana (author)
The success of offshore wind farm installations is often related to the costs and time taken to be completed. Current installation strategies require several critical offshore lifts for the completion of a single wind turbine, as in most cases each component gets installed separately. This is time-consuming and has a direct link to the cost of...
master thesis 2023
document
L'Ortije, Jasper (author)
With a booming eVTOL market, many new companies will design their own vision of the future of urban transport. Therefore, a MATLAB flight dynamics model is needed to accurately design a Lift + Cruise Aircraft in the preliminary design phase. The MATLAB program is based on the EVE V3 aircraft by Embraer. The model successfully simulates an input...
master thesis 2023
document
Sarıgöl, Barkin (author)
Various potential flow methods with different assumptions are available to quantify the efficiency increase and thrust provided by a swirl recovery vane (SRV). In this paper, thrust coefficients and efficiency results obtained by different potential flow methods for the same SRV geometry at different advance ratios are presented. The methods...
student report 2023
document
van der Vlugt, Joost (author)
The angular momentum or swirl in the propeller slipstream is an energy loss. An effective method to recover the swirl and increase the propulsive efficiency is to use Swirl Recovery Vanes (SRVs). Former research showed an over-prediction in SRV thrust by a lifting line theory (LLT) model compared to wind tunnel experiments. The LLT model assumes...
master thesis 2023
document
Reuchlin, S.P.A. (author), Joshi, R. (author), Schmehl, R. (author)
The majority of remote locations not connected to the main electricity grid rely on diesel generators to provide electrical power. High fuel transportation costs and significant carbon emissions have motivated the development and installation of hybrid power systems using renewable energy such these locations. Because wind and solar energy is...
journal article 2023
document
Puiman, L. (author), Almeida Benalcazar, E.F. (author), Picioreanu, C. (author), Noorman, H.J. (author), Haringa, C. (author)
In large-scale syngas fermentation, strong gradients in dissolved gas (CO, H<sub>2</sub>) concentrations are very likely to occur due to locally varying mass transfer and convection rates. Using Euler-Lagrangian CFD simulations, we analyzed these gradients in an industrial-scale external-loop gas-lift reactor (EL-GLR) for a wide range of...
journal article 2023
document
Ruland, Oscar (author), Mkhoyan, T. (author), De Breuker, R. (author), Wang, Xuerui (author)
journal article 2023
document
Cayon, O. (author), Gaunaa, Mac (author), Schmehl, R. (author)
Soft-wing kites for airborne wind-energy harvesting function as flying tensile membrane structures, each of whose shape depends on the aerodynamic load distribution and vice versa. The strong two-way coupling between shape and loading poses a complex fluid-structure interaction problem. Since computational models for such problems do not yet...
journal article 2023
document
Tetteroo, Daan (author)
All over the world, many offshore structures have been built in the last decades, both by the oil and gas industry and by the renewable industry. When these structures reach their end of life, they have to be removed. The removal is done in decommissioning projects. Many of those offshore structures are bottom founded. Of that amount, a big part...
master thesis 2022
Searched for: subject%3A%22lifting%22
(1 - 20 of 170)

Pages