Assessment of cyclic deformation behaviour of wire arc additively manufactured carbon steel

Wire Arc Additive Manufacturing (WAAM) has gained popularity due to its speed and cost-effectiveness. However, the current knowledge on the cyclic deformation behaviour of WAAM materials is limited. To address this issue, this study investigates the cyclic deformation behaviour of WAAM ER70S-6 carbon steel. Coupons were extracted from printed...

Feasibility of locally-coupled elasto-plastic damage modeling for remaining life prediction of low-speed damaged roller bearings under heavy loading condition

Low-speed roller bearings are generally in the sheave bearings and turret bearings which are used in the offshore industry under heavy loads. One of the challenges to the integrity of these bearings is the presence of subsurface cracking in the raceways. Downtime cost, which is caused by the failure of<br/>these bearings is significant. Based on...

Low Cycle Corrosion Fatigue in the North Sea Environment

Low cycle corrosion fatigue is an interesting issue in civil Engineering because it may effect the lifetime of structures in negative and unexpected ways. However, analysis of design codes has revealed that low cycle corrosion fatigue is not a major issue in the design of offshore structures because these structures are designed with a global...

Low-cycle compression fatigue of reinforced concrete structures

Paper reports on experiments performed in the low-cycle compression fatigue domain, considering two relatively high upper load levels and several lower ones. Two frequency levels were emphasized, i.e. 17.5 Hz and 0.175 Hz. An overview is given of characteristics of mechanical behaviour and of the state of damage close to fracture. Particular...