Characterization and mechanical removal of metallic aluminum (Al) embedded in weathered municipal solid waste incineration (MSWI) bottom ash for application as supplementary cementitious material

Municipal solid waste incineration (MSWI) bottom ash, due to its high mineral content, presents great potential as supplementary cementitious material (SCM). Weathering, also known as aging, is a treatment process commonly employed in waste management to minimize the risk of heavy metal leaching from MSWI bottom ash. Using weathered MSWI...

Cooperative lane-changing in mixed traffic: a deep reinforcement learning approach

Deep Reinforcement Learning (DRL) has made remarkable progress in autonomous vehicle decision-making and execution control to improve traffic performance. This paper introduces a DRL-based mechanism for cooperative lane changing in mixed traffic (CLCMT) for connected and automated vehicles (CAVs). The uncertainty of human-driven vehicles (HVs...

Rational design and additive manufacturing of grain boundary-inspired, multi-architecture lattice structures

The advent of additive manufacturing has facilitated the design and fabrication of hybrid lattice structures with multiple morphologies. These structures combine multiple distinct architectures into a single structure with an exceptional performance that far exceeds that of each constituting architecture. However, combining strut-based...

Distributed Coordinated Control for Fixed-Wing UAVs with Dynamic Event-Triggered Communication

Compared with most existing results concerning unmanned aerial vehicles (UAVs) wherein two-degree or only attitude/longitudinal dynamics are considered, this paper proposes an event-based fault-tolerant coordinated control (FTC) for multiple fixed-wing UAVs such that the consensus tracking of velocity and attitude is achieved in the presence...

A review: Reaction mechanism and strength of slag and fly ash-based alkali-activated materials

Alkali-activated materials (AAM) are known to be environmentally friendly alternatives to cement-based materials because they can potentially reduce greenhouse gas emissions and reutilize industrial by-products/wastes. To study the factors influencing the strength of slag based alkali-activated materials (BFS-AAM), fly ash based alkali...

Future perspectives for alkali‐activated materials: from existing standards to structural applications

The production of cement and concrete contributes significantly to global greenhouse gas emissions. Alkali‐activated concretes (AACs) are a family of existing alternative construction materials that could reduce the current environmental impact of Portland cement (PC) production and utilisation. Successful applications of AACs can be found in...

A comparison between alkali-activated slag/fly ash binders prepared with natural seawater and deionized water

In this research, the effects of natural seawater (SW) on the properties of alkali-activated slag/fly ash (AASF) are studied. AASF prepared with deionized water is set as the reference mixture. The results showed that the use of natural SW resulted in a prolonged setting time and lower heat release, but no obvious impact on the flowability of...

Vision-Based Nonlinear Incremental Control for A Morphing Wing with Mechanical Imperfections

Morphing structures have acquired much attention in the aerospace community because they enable an aircraft to actively adapt its shape during flight, leading to fewer emissions and fuel consumption. Researchers have designed, manufactured, and tested a morphing wing named SmartX-Alpha, which can actively alleviate loads while achieving the...

A review: The strength influence factors of slag and fly ash based alkali activated materials

Alkali-activated materials(AAM) are known to be environmentally friendly alternatives to cement-based materials because they can potentially reduce greenhouse gas emissions and reutilize industrial by-products. However, the application of AAM is still limited by the lack of mixture design regulation. Unlike cement, the very different chemical...

Optimization of intrinsic self-healing silicone coatings by benzotriazole loaded mesoporous silica

Multifunctional intrinsic self-healing polymers (ISP) are gaining increasing attention these days, and many studies have been devoted to solving the conflict between achieving high mechanical polymer strength and active polymer chain diffusion. In this research, we developed an optimized self-healing composite coating by adding Benzotriazole ...

Experimental comparisons between one-part and normal (two-part) alkali-activated slag binders

One-part alkali-activated slag (AAS) binders are more promising in large-scale constructions because one-part mixing procedure is safer and easier to handle compared to normal two-part method. Thus, this study aims at investigating different properties of one-part AAS binders and control samples prepared using the two-part method. Experimental...

Visualized study of thermochemistry assisted steam flooding to improve oil recovery in heavy oil reservoir with glass micromodels

Steam channeling, one serious problem in the process of steam flooding in heavy oil reservoir, decreases the sweep efficiency of steam to cause a lower oil recovery. Viscosity reducer and nitrogen foam, two effective methods to improve oil recovery with different mechanism, present a satisfactory result after steam flooding. In this article,...

Recurrent knowledge graph embedding for effective recommendation

Knowledge graphs (KGs) have proven to be effective to improve recommendation. Existing methods mainly rely on hand-engineered features from KGs (e.g., meta paths), which requires domain knowledge. This paper presents RKGE, a KG embedding approach that automatically learns semantic representations of both entities and paths between entities...

A benchmark study of numerical implementations of the sea level equation in GIA modelling

The ocean load in glacial isostatic adjustment (GIA) modelling is represented by the so-called sea level equation (SLE). The SLE describes the mass redistribution of water between ice sheets and oceans on a deforming Earth. Despite various teams independently investigating GIA, there has been no systematic intercomparison among the numerical...

Plasticity under rough surface contact and friction

The ultimate objective of this work is to gain a better understanding of the plastic behavior of rough metal surfaces under contact loading. Attention in this thesis focuses on the study of single and multiple asperities with micrometer scale dimensions, a scale at which plasticity is known to be size dependent. The asperities have very simple...