A Comparative Study of Si3N4 and Al2O3 as Dielectric Materials for Pre-Charged Collapse-Mode CMUTs

Capacitive Micromachined Ultrasound Transducers (CMUTs) have many advantages compared to other ultrasonic transducer technologies, especially for implantable devices. However, they require a high bias voltage for efficient operation. To eliminate the need for an external bias voltage, a charge storage layer can be embedded in the dielectric....

Time-efficient low power time/phase-reversal beamforming for the tracking of ultrasound implantable devices

Ultrasound (US) has recently gained attention for powering and communication with implantable devices due to its short wavelength and low attenuation. However, beam mis-alignments cause a sharp decrease in the amount of transferred power and quality of communication. This work investigates a telemetry protocol that relies on the difference in...

Real-Time Coded Excitation Imaging Using a CMUT-based Side Looking Array for Intravascular Ultrasound

Intravascular ultrasound (IVUS) is a well-established diagnostic method that provides images of the vessel wall and atherosclerotic plaques. We investigate the potential for phased-array IVUS utilizing coded excitation (CE) for improving the penetration depth and image signal-to-noise ratio (SNR). It is realized on a new experimental...

The long-term reliability of pre-charged CMUTs for the powering of deep implanted devices

Recently, focused ultrasound has been proposed to power deeply implanted medical devices. Almost exclusively, lead zirconate titanate (PZT) transducers are used to convert acoustic energy into electrical energy. Unfortunately, these lead containing devices cannot be hermetically encapsulated since that would block the ultrasound. We propose the...

Ultrasound Energy Transfer using Charged CMUTs

Implantable medical devices (IMDs) such as cardiac pacemakers, cochlear implants, and neurostimulators improve millions of people’s lives every day. Over the years, IMDs have significantly improved in function, increased in lifetime, and decreased in size. However, further miniaturisation is limited by the batteries used to power these devices,...

Silicon photonic micro-ring resonators to sense strain and ultrasound

We demonstrated that photonic micro-ring resonators can be used in micro-machined ultrasound microphones. This might cause a breakthrough in array transducers for ultrasonography; first because optical multiplexing allows array interrogation via one optical fiber and second because the silicon-on-insulator technology allows cost-effective...