Searched for: subject%3A%22modeling%22
(1 - 20 of 36)

Pages

document
Weerheijm, J. (author), Lu, Y. (author), Xu, J. (author)
This paper presents a numerical modelling study on the simulation of the cracking process and fracture energy in concrete under high strain rate. To capture the stress wave effect and the damage evolution at the meso-length scale, both a homogeneous model with a millimetreresolution mesh and an explicit heterogeneous mesoscale model with random...
conference paper 2013
document
Lu, T. (author), Koenders, E.A.B. (author)
In this paper, a conceptual model for analyzing the plastic part of autogenous deformation of cement paste based on the Arrhenius rate theory will be presented. The autogenous deformation will be calculated from the elastic deformations with inclusion of creep. Different kinds of cement paste with a water cement ratio 0.3 are tested and studied,...
conference paper 2014
document
Lu, R. (author)
It is expected that information and communication technology (ICT) can have great impacts on traveler’s accessibility. However, understanding of the effects of ICT on accessibility is still limited. Consequently, this thesis aims to increase the understanding of such effects. The thesis develops a generic formal integrative behavioral model to...
doctoral thesis 2015
document
Lu, Q. (author)
Alloy design by the traditional trial and error approach is known to be a time consuming and a highly cost procedure, especially for the design of heat resistant steel where the feedback time is intrinsically long. The significant developments in computational simulation techniques in the last decades have made a theory-guided computational...
doctoral thesis 2015
document
Lu, S. (author), Lin, X. (author), Heemink, A.W. (author), Fu, G. (author), Segers, A.J. (author)
Volcanic ash forecasting is a crucial tool in hazard assessment and operational volcano monitoring. Emission parameters such as plume height, total emission mass, and vertical distribution of the emission plume rate are essential and important in the implementation of volcanic ash models. Therefore, estimation of emission parameters using...
journal article 2015
document
Lu, P. (author), van Kampen, E. (author), de Visser, C.C. (author), Chu, Q. P. (author)
The design of unknown-input decoupled observers and lters requires the assumption of an existence condition in the literature.This paper addresses an unknown input ltering problem where the existence condition is not satised. Instead of designing a traditional unknown input decoupled lter, a Double-Model Adaptive Estimation approach is extended...
journal article 2016
document
Lu, P. (author), van Kampen, E. (author), de Visser, C.C. (author), Chu, Q. P. (author)
This paper deals with aircraft trajectory control in the presence of model uncertainties and actuator faults. Existing approaches, such as adaptive backstepping and nonlinear dynamic inversion with online model identi_cation, can be applied. However, since there are a number of unknown aerodynamic derivatives, the tuning of parameter update law...
journal article 2016
document
Li, Nana (author), Jia, Li (author), Lu, Jing (author), Menenti, M. (author), Zhou, J. (author)
The regional surface soil heat flux (G0) estimation is very important for the large-scale land surface process modeling. However, most of the regional G0 estimation methods are based on the empirical relationship between G0 and the net radiation flux. A physical model based on harmonic analysis was improved (referred to as "HM model") and...
journal article 2017
document
Lu, X. (author), Chen, B. Y. (author), Tan, V. B.C. (author), Tay, T. E. (author)
The cohesive element has been widely employed to model delamination and matrix cracking in composite materials. However, an extremely fine mesh along the potential crack path is required to achieve accurate predictions of stresses within the cohesive zone. A sufficient number of cohesive elements must be present within the cohesive zone ahead...
journal article 2018
document
Luan, Hualong (author), Ding, P (author), Wang, Zhengbing (author), Yang, S.L. (author), Lu, Jin You (author)
Morphodynamics of world's river deltas are increasingly affected by human activities, which are of great ecological, economic and social implications. However, impacts of human interventions in deltaic regions are insufficiently<br/>understood, especially superimposed upon diminishing sediment supplies. This study uses the heavily interfered...
journal article 2018
document
Lu, X. (author), Chen, B. Y. (author), Tan, V. B.C. (author), Tay, T. E. (author)
A three-dimensional separable cohesive element (SCE) is proposed to enable the modelling of interaction between matrix cracking and interfacial delamination in laminated fibre-reinforced composite materials. It is demonstrated that traditional cohesive elements are incapable of modelling the coupled failure mechanisms accurately if...
journal article 2018
document
Lu, Shoufeng (author), Knoop, V.L. (author), Keyvan-Ekbatani, M. (author)
A two-Fluid Model (TFM) of urban traffic provides the macroscopic description of traffic state. The TFMs parameters are hard to calibrate, particularly for the dynamic traffic conditions. This leads to the TFM often being used to compare the quality of service through the plot of stopping time versus trip time of the vehicles in the network....
journal article 2018
document
Jacobs, B.J.C. (author), van der Marel, C. (author), Lu, S.J. (author), Li, X.P. (author)
The penetration of solid state lighting applications is due to the promise of a low-cost reliable solution by means of application of low- and mid-power LEDs. These LED packages are manufactured by making use of new processes and materials which in principle introduces a series of known and unknown failure modes. Corrosion is a specific failure...
book chapter 2018
document
Lu, T. (author)
Manual control tasks can be found everywhere in our daily activities, and the human ability to adapt in controlling many different vehicles such as cars and airplanes make it possible for us to travel farther, faster and higher. The human adaptation ability to changes in the controlled element dynamics is indispensable for tasks requiring high...
doctoral thesis 2018
document
Lu, T. (author), Tsouvalas, A. (author), Metrikine, A. (author)
A new high-order model for in-plane vibrations of rotating rings is developed in this paper. The inner surface of the ring is connected to an immovable axis through an elastic foundation (distributed springs), whereas the outer surface is traction free. The developed model enables the dynamic analysis of the rings on stiff elastic foundation...
journal article 2019
document
Lu, T. (author), Tsouvalas, A. (author), Metrikine, A. (author)
Ring-like structures are very commonly used in civil, mechanical and aerospace engineering. Typical examples of such structures are components in turbomachinery, compliant gears, conventional pneumatic tires and more recent non-pneumatic tires, to name a few. In this paper, a ring on elastic foundation is considered. The foundation, modelled as...
conference paper 2020
document
Lu, T. (author), Tsouvalas, A. (author), Metrikine, A. (author)
The in-plane steady-state response of a rotating ring on elastic foundation subjected to a stationary load is investigated theoretically using a high-order model in the framework of the plane strain assumption. The adopted high-order model accounts for the through-thickness variation of stresses and displacements, as well as the boundary...
journal article 2020
document
Li, Z. (author), Lu, T. (author), Liang, X. (author), Dong, H. (author), Ye, G. (author)
This study aims to provide a better understanding of the autogenous shrinkage of slag and fly ash-based alkali-activated materials (AAMs) cured at ambient temperature. The main reaction products in AAMs pastes are C-A-S-H type gel and the reaction rate decreases when slag is partially replaced by fly ash. Due to the chemical shrinkage and the...
journal article 2020
document
Lu, Guoyang (author), Wang, H. (author), Törzs, Tom (author), Liu, Pengfei (author), Zhang, Yuqing (author), Wang, Dawei (author), Oeser, Markus (author), Grabe, Jürgen (author)
Permeable pavements have been widely used as an effective means to improve hydrological characteristics and the ecology of the urban environment. This study aims to investigate the response of fully permeable pavement (FPP) subjected to dynamic loading under dry and saturated conditions. A full-scale test track topped with polyurethane bound...
journal article 2020
document
Lu, T. (author), Li, Z. (author), van Breugel, K. (author)
In recent decades, several simulation models have been proposed to predict autogenous shrinkage of cementitious systems. In most of these models, however, only the elastic deformation caused by self-desiccation of the hydrating cement paste is considered. In fact, cement paste is not an ideal elastic material. Also the time-dependent...
journal article 2020
Searched for: subject%3A%22modeling%22
(1 - 20 of 36)

Pages