Searched for: subject%3A%22permeability%22
(1 - 20 of 225)

Pages

document
Wang, Keyang (author)
Ceramic ultrafiltration is a promising technology for water reclamation, but issues with membrane fouling and the removal of organic micro-pollutants have limited its development. Recent research has shown that catalysis-based ultrafiltration has the potential to address these problems. In this study, catalysis-modified (CuFe2O4 and Pd)...
master thesis 2023
document
Shariati, Vahid (author), Roohi, Ehsan (author), Ebrahimi, Amin (author)
The direct simulation Monte Carlo (DSMC) method, which is a probabilistic particle-based gas kinetic simulation approach, is employed in the present work to describe the physics of rarefied gas flow in super nanoporous materials (also known as mesoporous). The simulations are performed for different material porosities (0.5≤ϕ≤0.9), Knudsen...
journal article 2023
document
Janssen, M.T.G. (author), Draganov, D.S. (author), Barnhoorn, A. (author), Wolf, K.H.A.A. (author)
As part of a seismic monitoring project in a geothermal field, where the feasibility of re-injection and storage of produced CO<sub>2</sub> is being investigated, a P- and S-wave seismic velocity characterisation study was carried out. The effect of axial and radial (up to 42 MPa) stress, pore pressure (up to 17 MPa), pore fluid (100% brine...
journal article 2023
document
Werlen, Vincent (author), Vocke, Richard (author), Brauner, Christian (author), Dransfeld, C.A. (author), Michaud, Véronique (author), Rytka, Christian (author)
A new model is proposed for the consolidation of hybrid textiles, in which air entrapment and dissolution are considered. One of the key parameters is tow permeability, which is described by the analytical model of Gebart and validated at very high fibre volume fractions by direct tow permeability measurement. The model also takes into...
journal article 2023
document
Mata, Marisol Irías (author), van Gent, M.R.A. (author)
Numerical modelling of wave interaction with rock-armoured rubble mound breakwaters has been performed to study wave overtopping. The influences of the slope angle, a berm in the seaward slope, a protruding crest wall, a recurved parapet, and the wave steepness have been studied using a validated CFD model (OpenFOAM). The numerical modelling...
journal article 2023
document
Roeplal, R.N. (author), Pang, Y. (author), Adema, Allert (author), van der Stel, Jan (author), Schott, D.L. (author)
Bed permeability is a crucial factor in blast furnace efficiency and stability. The Discrete Element Method (DEM) has been used extensively to model material flow in different parts of the furnace and holds great potential for optimizing the permeability. The inherent computational load is the main bottleneck in using this method to provide...
review 2023
document
Luo, Y. (author), Zhang, Jiaming (author), Zhou, Zhi (author), Victor, Chikhotkin (author)
Quantitative investigation on the preferential flow induced by desiccation cracks (PF-DC) remains a great challenge due to the soil shrinking-swelling behavior. This work presents a series of comparative numerical studies to investigate the accuracy and substitutability of different models in simulating the water flux, hydrological response...
journal article 2023
document
Alkharraa, H.S.H. (author), Wolf, K.H.A.A. (author), Kwak, Hyung T. (author), Deshenenkov, Ivan S. (author), AlDuhailan, Mohammed A. (author), Mahmoud, Mohamed A. (author), Arifi, Suliman A. (author), AlQahtani, Naif B. (author), AlQuraishi, Abdulrahman A. (author), Zitha, P.L.J. (author)
Macro-, meso-, micro-pore systems combined with clay content are critical for fluid flow behavior in tight sandstone formations. This study investigates the impact of clay mineralogy on pore systems in tight rocks. Three outcrop samples were selected based on their comparative petrophysical parameters (Bandera, Kentucky, and Scioto). Our...
conference paper 2023
document
Li, Longlong (author), Khait, M. (author), Voskov, D.V. (author), Terekhov, Kirill M. (author), Abushaikha, Ahmad (author)
We apply Massively Parallel Interface for MPFA-O scheme with state-of-the-art Operator-Based Linearization (OBL) approach for multiphase flow in porous media. The implementation of MPFA-O scheme enhances the modelling capabilities for non-K-orthogonal mesh. A fully implicit scheme is applied to guarantee the stability of solutions when a mass...
journal article 2023
document
Bo, Z. (author), Boon, M.M. (author), Hajibeygi, H. (author), Hurter, Suzanne (author)
Underground Hydrogen Storage (UHS) is an emerging large-scale energy storage technology. Researchers are investigating its feasibility and performance, including its injectivity, productivity, and storage capacity through numerical simulations. However, several ad-hoc relative permeability and capillary pressure functions have been used in...
journal article 2023
document
Luesutthiviboon, S. (author)
Nowadays, large wind turbines are installed and operated close to densely populated areas due to the growing need for renewable energy. Noise constraints are hampering this development. The most relevant wind turbine noise source is the so-called Turbulent Boundary Layer Trailing-Edge (TBL–TE) noise. Many passive TBL–TE noise reduction...
doctoral thesis 2022
document
Rego, Leandro (author)
Aircraft noise levels have been significantly reducedwith the introduction of high-bypass ratio turbofan engines, particularly jet noise due to turbulence mixing. This, however, has led to engines with larger diameters and a closer coupling between them and the airframe. As a result, interactions between the exhaust jet flow and the wing give...
doctoral thesis 2022
document
Gravenberch, Jip (author)
Vegetated permeable pavement systems (VPPS) contribute to a more climate-resilient application of urban water management. However, a complete hydrologic evaluation of vegetated permeable pavement systems has not been found in existing literature. This research presents an evaluation of the hydrologic performance of VPPS under Dutch climatic...
master thesis 2022
document
Alferink, Marijn (author)
The coastline of Demak, Indonesia has been eroded during the last 15 years. To restore the natural coastal protection which existed out of mangroves forest, permeable dams, consisting of bamboo poles with a brushwood filling, have been built to attenuate the waves and facilitate sedimentation behind the dams and thus creating a habitat for...
master thesis 2022
document
Ghosh, D. (author), Donselaar, Rick (author)
The identification of arsenic-contamination hotspots in alluvial aquifers is a global-scale challenge. The collection and inventory of arsenic concentration datasets in the shallow-aquifer domain of affected alluvial basins is a tedious and slow process, given the magnitude of the problem. Recent research demonstrates that oxbow-lake...
journal article 2022
document
Bai, Ying (author), Wang, Zongzhi (author), van der Hoek, J.P. (author)
Agricultural activities can be important source of organic pollution. In agricultural intensive areas, organic chemicals have a high possibility of entering the water cycle, which could pose a potential risk to human health. Low-cost and high efficiency in-situ techniques instead of energy and money consuming ones to control agricultural organic...
review 2022
document
Yang, Zhengxian (author), Shi, Peng (author), Zhang, Yong (author), Li, Z. (author)
Internal curing by superabsorbent polymer (SAP) has been applied in alkali-activated slag (AAS) systems by a few previous studies with the purpose to mitigate the autogenous shrinkage. However, the effects of SAP on other properties of AAS have been rarely studied. In this paper, the workability, strength, permeability, and frost resistance...
journal article 2022
document
Batt, Till (author), Herwig, Gordon (author), Annaheim, Simon (author), Clement, Pietro (author), Furer, Lea (author), Hirsch, Cordula (author), Varanges, Vincent (author), Çağlar, B. (author), Michaud, Véronique (author)
The COVID-19 pandemic resulted in shortages of personal protective equipment and medical devices in the initial phase. Agile small and medium-sized enterprises from regional textile industries reacted quickly. They delivered alternative products such as textile-based community masks in collaboration with industrial partners and research...
journal article 2022
document
Shahzad, H. (author), Hickel, S. (author), Modesti, D. (author)
We perform direct numerical simulations of turbulent flow at friction Reynolds number Re<sub>τ</sub>≈ 500 - 2000 grazing over perforates plates with moderate viscous-scaled orifice diameter d<sup>+</sup>≈ 40 - 160 and analyse the relation between permeability and added drag. Unlike previous studies of turbulent flows over permeable surfaces,...
journal article 2022
document
Caglar, Baris (author), Broggi, G.C. (author), Ali, Muhammad A. (author), Orgéas, Laurent (author), Michaud, Véronique (author)
Permeability of fibrous microstructures is a key material property for predicting the mold fill times and resin flow path during composite manufacturing. In this work, we report an efficient approach to predict the permeability of 3D microstructures from deep learning based permeability predictions of 2D cross-sections combined via a circuit...
journal article 2022
Searched for: subject%3A%22permeability%22
(1 - 20 of 225)

Pages