Geotechnical bearing capacity of MV piles: Improving the design based on full scale load tests in the Port of Rotterdam

Almost 4000 MV piles are used as anchorage of quay walls in the port of Rotterdam. The current design method of MV piles in Dutch practice is a CPT-based method that correlates the cone resistance to the shaft friction by a factor α_t. In the port of Rotterdam, the cone resistance is restricted under the assumption that no shaft resistance...

Geotechnical Bearing Capacity of Timber Piles in the City of Amsterdam: Derivation of bearing capacity prediction factors based on static load tests conducted on instrumented timber piles

In the city of Amsterdam, many structures, such as houses,bridges and quay walls, are founded on wooden piles. In order to gain insightinto the safety of such structures, assessment of the foundations is required.As part of an experimental framework assessing the safety of bridges and quaywalls in the city of Amsterdam, a...

Modelling of pile load tests in granular soils: Loading rate effects

People have used pile foundations throughout history to support structures by transferring<br/>loads to deeper and stronger soil layers. One of the most important questions during the design of the pile foundation is the bearing capacity of the pile. The most reliable method for determining the bearing capacity is to use results from pile load...

Literature review Quasi-static and Dynamic pile load tests: Primarily report on non-static pile load tests

Pile testing, which plays an importance role in the field of deep foundation design, is performed by static and non-static methods to provide information about the following issues: (Poulos, 1998) - The ultimate capacity of a single pile. - The load-displacement behavior of a pile. - The performance of a pile during the test conditions. - The...

The effect of loading rate on pile bearing capacity of saturated sand

Pile load tests are commonly used by engineers to determine its bearing capacity. At present, there are three methods of pile load tests: the static, the dynamic and the quasi-static test. The static pile load test is done by applying an axial load on the pile with a long duration. The dynamic and quasi-static tests are done with an impact load...