- document
-
van der Hoeven, W. (author)The effect of cooling rate on some mechanical properties of APC-2/AS4 composite was investigated over the range between 1 and 70° C/min. Preconsolidated unidirectional laminates were reprocessed in a hot platen press at controlled cooling rates. Double Cantilever Beam specimens and End Notch Flexure specimens were used to determine the mode I...report 1993
- document
-
Laméris, J. (author), Minderhoud, P. (author)The mechanical behaviour of mechanically fastened double lap carbon-epoxy joints has been investigated both by experiments (static tests) and by analysis. Several fastener types and joint geometries has been investigated. In the experimental programme the Fibredux 6376/T400H material was used. Two methods to analyze mechanically fastened...report 1989
- document
-
Wanhill, R.J.H. (author)Flight simulation fatigue crack propagation tests with gust spectrum loading were carried out on laminates of (i) aluminium alloy 2024-T3/carbon-epoxy, (ii) aluminium alloy 7475-T761/carbon-epoxy and (iii) titanium alloy Ti-6Al-4V/carbon-epoxy with nominal weight savings of 30% and 40% as compared to equivalent 2024-T3 Alclad and 7475-T761...report 1982
- document
-
Wanhill, R.J.H. (author)Flight simulation fatigue crack propagation tests with gust spectrum loading were carried out on 2024-T3/carbon-epoxy, 7475-T76l/carbon-epoxy and Ti-6Al-4V/carbon-epoxy laminates with nominal weight savings of -30% as compared to equivalent 2024-T3 panels. The performance of the 2024-T3/carbon-epoxy laminates was much superior to those of the...report 1978
- document
- 't Hart, W.G.J. (author) report 1977
- document
-
Wanhill, R.J.H. (author)Plight simulation fatigue crack propagation tests with gust spectrum loading were carried out on 2024-T3/carbon-epoxy, 7475-T761/carbon-epoxy and Ti-6Al-4V/carbon-epoxy laminates with nominal weight savings of 30% as compared to equivalent 2024-T3 panels. The performance of the 2024-T3/ carbon-epoxy laminates was much superior to those of the...report 1977