Cyclic Shear Response of Fine-Sand Tailings Using Cyclic Direct Shear Test

The extraction and processing of mineral and metal ores in the mining industry comes paired with large amounts of mine waste, also known as tailings. This waste consists of various chemicals, acids, and heavy metals which are used during these extraction processes. The tailings are usually stored off in tailings storage facilities (TSF) in a...

Development and analysis of a three-dimensional braided honeycomb structure

This paper presents the design and development of three-dimensional braided honeycomb structures. The basic principles and braiding process are described. The relationship between braiding parameters and honeycomb geometric parameters is established and several three-dimensional (3D) braided honeycomb fabrics are introduced. Based on the...

Cellular Solids Based on Biopolymer Nanocomposites: For Hypersonic Heat Shields Aboard Sounding Rockets

The society of Delft Aerospace Rocket Engineering (DARE) aims at launching the Stratos IV sounding rocket to an apogee of 100km; thus cementing their place as one of the few student teams that have had the unique opportunity to design and build a rocket that is capable of reaching the frontiers of space. In doing so, DARE has entered flight...

Numerical Modelling of Sintering of Alumina

In this project we introduce the sintering process, which involves two basic phenomena, pore shrinkage and grain growth, occurring simultaneously. The objective of this project is to quantitatively describe the sintering process incorporating the kinetics of pore shrinkage and grain growth. First we build a model for pore shrinkage separately....

Relative Density Differences of a Sand Fill

The Maasvlakte II project is a joint venture between Boskalis and Van Oord. During the construction, they have measured the relative density for different kind of work methods, by making cone penetration tests. The result of those measurement is, that the measured relative density for the Maasvlakte II project is higher than the values that can...

Piping in loose sands – the importance of geometrical fixity of grains

Piping is one of the possible failure mechanism for dams and levees with a sandy foundation. Water flowing through the foundation causes the onset of grain transport, due to which shallow pipes are formed at the interface of the sandy layer and an impermeable blanket layer. In the past, the mechanism has been investigated predominantly in...